Design Con 2015
Breaking News
Comments
Newest First | Oldest First | Threaded View
adipdutt
User Rank
Rookie
re: Hardware mess cleaned up with software
adipdutt   5/19/2012 6:34:19 PM
NO RATINGS
Thanks for your comments and suggestions,actually it was not for defense but private industry also my company was working as a design service provider. In fact the path PWM solution went on to use when the manufacturer sourced displays from different vendors and the LED back lit current varied a lot. I agree, for a product a short time software patch may be used, but if there is really a hardware design problem, sooner it is rectified the better.

anon9303122
User Rank
Freelancer
re: Hardware mess cleaned up with software
anon9303122   4/27/2011 2:09:44 PM
NO RATINGS
Funny thing though, sometimes in the defense industry it is cheaper to change hardware than software anytime you are working with critical systems. As it turns out the work necessary to re-certify system safety software takes a lot longer and costs a lot more money than to re-certify the hardware changes.

_hm
User Rank
CEO
re: Hardware mess cleaned up with software
_hm   4/20/2011 3:26:45 AM
NO RATINGS
This may be good intermittent solution. But as kendallcp mentioned, it must not happen and it should be immediately rectified with new CCA.

kendallcp
User Rank
Rookie
re: Hardware mess cleaned up with software
kendallcp   4/18/2011 3:11:14 PM
NO RATINGS
We all like to get Brownie points for fixing problems like this. Ultimately, though, this is only a Band-Aid. It fixes one manifestation of shoddy layout & analog design (perhaps even provably, though probably only empirically). But what when the next batch of LDOs actually oscillate rather than just fall out of regulation? Let's not send the message that it's OK to forget about how to do good hardware design because some smart software guy can always fix it up!

cdhmanning
User Rank
Rookie
re: Hardware mess cleaned up with software
cdhmanning   4/18/2011 3:48:23 AM
NO RATINGS
It is always a software problem. Why? It is often easier to change software than anything else. I've fixed many electronic and even mechanical defects in software. The oddest, perhaps, was fixing a lubrication defect in software. The wrong lubricant was used to lubricate some bearings in some units. When the device got hot this caused the lube to be too thin and the mechanics would slide more freely than originally designed causing oscillation. When the lube cooled it got too thick and the operation was sluggish. Solution: replace the PID loop parameters with two sets of parameters and look at oscillation to determine which set to use.

jigish.shukla1
User Rank
Rookie
re: Hardware mess cleaned up with software
jigish.shukla1   4/17/2011 8:59:14 PM
NO RATINGS
Great post, very interesting work. Jigish Shukla Electronics Engineer www.knownfo.com

agk
User Rank
Rookie
re: Hardware mess cleaned up with software
agk   4/17/2011 2:30:28 PM
NO RATINGS
A good idea in time. Generally we just start our thinking to solve these kind of issues we get into a super solutions also we land into many more options for future product development !

Tom VanCourt
User Rank
Rookie
re: Hardware mess cleaned up with software
Tom VanCourt   4/15/2011 7:21:56 PM
NO RATINGS
I did the same thing on a project back in the 90's. In my case, the problem occurred during startup, turning on a daughter card with plenty of decoupling caps. Inrush to charge the caps dropped supply voltage enough to trigger the power monitor chip. That reset the system, which proceeded to turn on the daughter card, ... lather, rinse, repeat. I didn't exactly PWM, but pretty close - a slightly different kind of duty cycle modulation with the same net effect.

zeeglen
User Rank
Blogger
re: Hardware mess cleaned up with software
zeeglen   4/15/2011 1:14:24 AM
NO RATINGS
Nice example of how a seemingly innocuous change can suddenly turn into a butt-biting alligator snapper. Good solution with software PWM. Someone (other than management) should have received a bonus for creative thinking.

old account Frank Eory
User Rank
Rookie
re: Hardware mess cleaned up with software
old account Frank Eory   4/14/2011 11:27:49 PM
NO RATINGS
Nice solution. Also a good example of why managers and marketers should not assume that specs can be changed and new features added to an existing product without consequences.



Top Comments of the Week
Flash Poll
Like Us on Facebook

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
EE Life
Frankenstein's Fix, Teardowns, Sideshows, Design Contests, Reader Content & More
Carlos Bueno

Adventures in Userland
Carlos Bueno
Post a comment
Editor’s Note: Excerpted from Lauren Ipsum: A story about computer science and other improbable things, author Carlos Bueno introduces us to Lauren and her adventures in ...

Max Maxfield

Tired Old iPad 2 vs. Shiny New iPad Air 2
Max Maxfield
8 comments
I remember when the first iPad came out deep in the mists of time we used to call 2010. Actually, that's only four years ago, but it seems like a lifetime away -- I mean; can you remember ...

Martin Rowe

Make This Engineering Museum a Reality
Martin Rowe
Post a comment
Vincent Valentine is a man on a mission. He wants to make the first house to ever have a telephone into a telephone museum. Without help, it may not happen.

Rich Quinnell

Making the Grade in Industrial Design
Rich Quinnell
16 comments
As every developer knows, there are the paper specifications for a product design, and then there are the real requirements. The paper specs are dry, bland, and rigidly numeric, making ...

Special Video Section
The LT8640 is a 42V, 5A synchronous step-down regulator ...
The LTC2000 high-speed DAC has low noise and excellent ...
How do you protect the load and ensure output continues to ...
General-purpose DACs have applications in instrumentation, ...
Linear Technology demonstrates its latest measurement ...
10:29
Demos from Maxim Integrated at Electronica 2014 show ...
Bosch CEO Stefan Finkbeiner shows off latest combo and ...
STMicroelectronics demoed this simple gesture control ...
Keysight shows you what signals lurk in real-time at 510MHz ...
TE Connectivity's clear-plastic, full-size model car shows ...
Why culture makes Linear Tech a winner.
Recently formed Architects of Modern Power consortium ...
Specially modified Corvette C7 Stingray responds to ex Indy ...
Avago’s ACPL-K30T is the first solid-state driver qualified ...
NXP launches its line of multi-gate, multifunction, ...
Doug Bailey, VP of marketing at Power Integrations, gives a ...
See how to ease software bring-up with DesignWare IP ...
DesignWare IP Prototyping Kits enable fast software ...
This video explores the LT3086, a new member of our LDO+ ...
In today’s modern electronic systems, the need for power ...