Embedded Systems Conference
Breaking News
Comments
Newest First | Oldest First | Threaded View
Page 1 / 2   >   >>
green_is_now
User Rank
Author
re: Piezoelectric MEMS boosts vibration harvester
green_is_now   5/12/2011 5:09:30 PM
NO RATINGS
yes just broadcast the energy amplitude and frequency or monitor on sensor, anyway this signal alone could trigger a physical inspection of the bridge as it could be monitored for changes to its steady state over time.

green_is_now
User Rank
Author
re: Piezoelectric MEMS boosts vibration harvester
green_is_now   5/12/2011 5:06:38 PM
NO RATINGS
IR losses stop this size reduction, also the step up ratio needs the wire length. But it could be broken up into smaller components for highth reduction for example at the cost of adding extra componnets

green_is_now
User Rank
Author
re: Piezoelectric MEMS boosts vibration harvester
green_is_now   5/12/2011 5:03:47 PM
NO RATINGS
most aplications will have a well defined vibration frequency but many will not. Why not design the mems so that the respond to a broader range of frequencie so as to have higher probability of energy being in the pass band of the converter? Thus harmonics and/or subharmonic frequency components along with the fundametals would most alway fall into the passband. How do garentee orentaition? Are the mems designed to except vibration in any direction or do they need to be "inplane"? That is are the MEMS 3D?

krisi
User Rank
Author
re: Piezoelectric MEMS boosts vibration harvester
krisi   5/2/2011 8:18:36 PM
NO RATINGS
I don't see that technology being used in human body implants, too dangarous...but some wireless sensors networks could take advantages of this...very interesting, Kris

prabhakar_deosthali
User Rank
Author
re: Piezoelectric MEMS boosts vibration harvester
prabhakar_deosthali   4/29/2011 6:12:23 AM
NO RATINGS
Yes! especially for earthquake-prone zones , the structural integrity can be monitored using a mesh of such sensors embedded into the structure.

kdboyce
User Rank
Author
re: Piezoelectric MEMS boosts vibration harvester
kdboyce   4/29/2011 5:43:09 AM
NO RATINGS
Rule to live by...Don't get sick, and apparently don't be near anyone that is if they have that technology implanted. Like all technologies, they can be used for good or evil and unfortunately the scale tends to tip towards evil far more today than ever before.

DrQuine
User Rank
Author
re: Piezoelectric MEMS boosts vibration harvester
DrQuine   4/28/2011 11:45:03 PM
NO RATINGS
This technology might also be a good way to power embedded structural integrity sensors in bridges or other systems which are difficult to access. Certainly vibration is available....

Bob Lacovara
User Rank
Author
re: Piezoelectric MEMS boosts vibration harvester
Bob Lacovara   4/28/2011 8:23:27 PM
NO RATINGS
Note that a vibration sensor is a form of microphone. Note that in medical applications, we now face a future in which microphones are implanted into us. Note that the device can report wirelessly. Note the funding source, DARPA. Read the article on MondoNet (go to the home page for it) being developed as a distributed, wireless access fabric that will cover the world. (Note that the developers are concerned with "privacy".) So, let's see: everywhere you go, the government will be able to hear you. O brave new world!

Sanjib.A
User Rank
Author
re: Piezoelectric MEMS boosts vibration harvester
Sanjib.A   4/28/2011 5:39:27 PM
NO RATINGS
What kind of industrial process control application ideas are in your mind?...remote sensing realated?

wilber_xbox
User Rank
Author
re: Piezoelectric MEMS boosts vibration harvester
wilber_xbox   4/28/2011 5:13:18 PM
NO RATINGS
Is there any limitation to increasing its vibration range? Why only 14-155Hz vibrations? I guess that having the broader vibration range can have other usages.

Page 1 / 2   >   >>


Radio
LATEST ARCHIVED BROADCAST
As data rates begin to move beyond 25 Gbps channels, new problems arise. Getting to 50 Gbps channels might not be possible with the traditional NRZ (2-level) signaling. PAM4 lets data rates double with only a small increase in channel bandwidth by sending two bits per symbol. But, it brings new measurement and analysis problems. Signal integrity sage Ransom Stephens will explain how PAM4 differs from NRZ and what to expect in design, measurement, and signal analysis.

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Like Us on Facebook
Special Video Section
The LTC®6363 is a low power, low noise, fully differential ...
Vincent Ching, applications engineer at Avago Technologies, ...
The LT®6375 is a unity-gain difference amplifier which ...
The LTC®4015 is a complete synchronous buck controller/ ...
10:35
The LTC®2983 measures a wide variety of temperature sensors ...
The LTC®3886 is a dual PolyPhase DC/DC synchronous ...
The LTC®2348-18 is an 18-bit, low noise 8-channel ...
The LT®3042 is a high performance low dropout linear ...
Chwan-Jye Foo (C.J Foo), product marketing manager for ...
The LT®3752/LT3752-1 are current mode PWM controllers ...
LED lighting is an important feature in today’s and future ...
Active balancing of series connected battery stacks exists ...
After a four-year absence, Infineon returns to Mobile World ...
A laptop’s 65-watt adapter can be made 6 times smaller and ...
An industry network should have device and data security at ...
The LTC2975 is a four-channel PMBus Power System Manager ...
In this video, a new high speed CMOS output comparator ...
The LT8640 is a 42V, 5A synchronous step-down regulator ...
The LTC2000 high-speed DAC has low noise and excellent ...
How do you protect the load and ensure output continues to ...