Embedded Systems Conference
Breaking News
Comments
Newest First | Oldest First | Threaded View
Page 1 / 2   >   >>
nardis_miles
User Rank
Author
re: HP discovers memristor mechanism
nardis_miles   6/23/2012 8:46:41 PM
NO RATINGS
If this technology is dependent on hot-spots for phase transitions, I would be surprised if reliability were not an issue. They're claim of cyclability is a little suspect. How many devices are switching for 3x10^10 cycles?

elctrnx_lyf
User Rank
Author
re: HP discovers memristor mechanism
elctrnx_lyf   5/21/2011 6:31:23 PM
NO RATINGS
If the memristor is really capable of replacing both flash and DRAM in the future, then definitely this is a welcome news for any product. I wish HP can commercialize this in the next couple of years.

R G.Neale
User Rank
Author
re: HP discovers memristor mechanism
R G.Neale   5/21/2011 9:19:52 AM
NO RATINGS
Correction: the sentence in my comment above should read ...the memistor requires a phase change, this is now just another PCM phase change memory..... Apologies

R G.Neale
User Rank
Author
re: HP discovers memristor mechanism
R G.Neale   5/20/2011 11:18:57 PM
NO RATINGS
Colin""""Not only does an applied voltage drive the migration of oxygen vacancies in the device, but at the same time there is a current that heats it up to about 300 degrees Celsius—just enough to turn the amorphous film into a crystalline film.""" So it now appears rather than just a device that uses voltage driven migration of vacancies to change the condition of a thin region, the memristor is a phase change is required, this is now another PCM a phase change memory. It needs a temperature of 300 C to crystallize, what temperature is required to return it to the amorphous state? Or how does it return to the amorphous state and is the formation of the crystalline state a one time initial forming process into which vacancies are forced or removed to create the memory states? It will be interesting to see if the memory patent portfolio of ENER and or Ovonyx cover phase changes in materials other than chalcogenides and or materials in general, I suspect they might. If so HP might find they have more than a technology manufacturing problems to deal with.

bcarso
User Rank
Author
re: HP discovers memristor mechanism
bcarso   5/20/2011 6:46:21 PM
NO RATINGS
I am glad that HP survived Fiorina, and now is showing that they didn't bite off more than they could Chua.

resistion
User Rank
Author
re: HP discovers memristor mechanism
resistion   5/19/2011 2:44:29 AM
NO RATINGS
Colin, that is interesting to note, thanks. But for these analog operations, it is even more important to first confirm the distributions are tight. Otherwise relying on the sensitivities will lead to lots of errors. Charges jump in and out all the time even at zero current. Should we expect natural memristance fluctuations?

R_Colin_Johnson
User Rank
Author
re: HP discovers memristor mechanism
R_Colin_Johnson   5/19/2011 2:09:51 AM
NO RATINGS
HP is also planning to tune these sensitivities for analog operation, both to add levels for multi-bit per memristor storage, as well as for brain-like connections that become more conductivity the more you use them.

resistion
User Rank
Author
re: HP discovers memristor mechanism
resistion   5/19/2011 1:59:32 AM
NO RATINGS
But most if not all RRAM's other than HP's as well as PCM's, MRAM's, etc. do not exhibit such obvious sensitivities.

R_Colin_Johnson
User Rank
Author
re: HP discovers memristor mechanism
R_Colin_Johnson   5/18/2011 11:14:03 PM
NO RATINGS
HP is doing a good job of stepping up to the plate to fill the void in basic U.S. R&D.

R_Colin_Johnson
User Rank
Author
re: HP discovers memristor mechanism
R_Colin_Johnson   5/18/2011 11:12:14 PM
NO RATINGS
There are various architectural features that can be used to enable reading RRAM bit cells made with memristors without changing their value.

Page 1 / 2   >   >>


Radio
LATEST ARCHIVED BROADCAST
As data rates begin to move beyond 25 Gbps channels, new problems arise. Getting to 50 Gbps channels might not be possible with the traditional NRZ (2-level) signaling. PAM4 lets data rates double with only a small increase in channel bandwidth by sending two bits per symbol. But, it brings new measurement and analysis problems. Signal integrity sage Ransom Stephens will explain how PAM4 differs from NRZ and what to expect in design, measurement, and signal analysis.

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Like Us on Facebook
Special Video Section
The LTC®6363 is a low power, low noise, fully differential ...
Vincent Ching, applications engineer at Avago Technologies, ...
The LT®6375 is a unity-gain difference amplifier which ...
The LTC®4015 is a complete synchronous buck controller/ ...
10:35
The LTC®2983 measures a wide variety of temperature sensors ...
The LTC®3886 is a dual PolyPhase DC/DC synchronous ...
The LTC®2348-18 is an 18-bit, low noise 8-channel ...
The LT®3042 is a high performance low dropout linear ...
Chwan-Jye Foo (C.J Foo), product marketing manager for ...
The LT®3752/LT3752-1 are current mode PWM controllers ...
LED lighting is an important feature in today’s and future ...
Active balancing of series connected battery stacks exists ...
After a four-year absence, Infineon returns to Mobile World ...
A laptop’s 65-watt adapter can be made 6 times smaller and ...
An industry network should have device and data security at ...
The LTC2975 is a four-channel PMBus Power System Manager ...
In this video, a new high speed CMOS output comparator ...
The LT8640 is a 42V, 5A synchronous step-down regulator ...
The LTC2000 high-speed DAC has low noise and excellent ...
How do you protect the load and ensure output continues to ...