Breaking News
Comments
Newest First | Oldest First | Threaded View
SrikanthE
User Rank
Author
re: How do I reset my FPGA?
SrikanthE   11/9/2012 4:43:07 AM
NO RATINGS
I would recommend a synchronization circuit(rather than the reset bridge) for synchronizing a control signal that crosses between unrelated clock domains. If your input change is more than one capture clock period of the destination clock apart, use a two FF synchronization circuit which provides meta-stability resolution. The synchronization circuit is a two D-FFs cascaded and clocked by the destination clock. The signal clocked by the source clock is connected to the 'D' input of the first flip flop of the synchronization circuit. Also note that a MAX_DELAY constraint should be placed on the connection between the flip-flops so that they are physically placed close together to reduce the probability of conducting a meta-stable condition. If your clocks are related then to it should be covered by the relative period constraint.

mediterranean
User Rank
Author
re: How do I reset my FPGA?
mediterranean   11/7/2012 4:21:16 PM
NO RATINGS
Very interesting article indeed. I am wondering if this way to synchronize a reset signal (to generate a reset which is synchronous with your clock) would only apply to resets or also to any other type of signal. Say you have a certain signal synchronous to the uBlaze clock at 100MHz for example, and you would like to use it to control a block of logic that runs at 180Mhz, could you also use the 2 flip-flops and use it as async reset (or preset) to generate a sync signal? If not, what is the best way to do this? Thanks

nic2
User Rank
Author
re: How do I reset my FPGA?
nic2   1/17/2012 3:44:13 AM
NO RATINGS
Larger designs suffer even more with these issues. Using these techniques in larger designs has higher payoff!

nic2
User Rank
Author
re: How do I reset my FPGA?
nic2   1/17/2012 3:43:06 AM
NO RATINGS
This is a great article! I used this reset synchronizer design in an article I wrote. It is at http://nicisdigital.wordpress.com/2012/01/16/digital-design-system-resets/ Another issue to consider is the routing resources that synchronous resets consume. There are easy ways to overcome this.

SanthoshReddyA
User Rank
Author
re: How do I reset my FPGA?
SanthoshReddyA   12/2/2011 10:35:54 AM
NO RATINGS
Congratulations on what you did, In small projects, this reset seems to be best suited. Is these ideas and methods are applicable to large projects & other FPGA makes?

DrFPGA
User Rank
Author
re: How do I reset my FPGA?
DrFPGA   8/23/2011 7:31:22 PM
NO RATINGS
A good companion piece to this one would be 'How do I clock my FPGA?' After that 'How do I initialize my FPGA', 'How do I power my FPGA' and then maybe 'How do I design my FPGA for low noise (decouple, route, etc)'. All very basic but critical issues...

Max The Magnificent
User Rank
Author
re: How do I reset my FPGA?
Max The Magnificent   8/10/2011 4:01:00 PM
NO RATINGS
This is a really useful article. If you have a design topic that you would like to write about for me to post here at Programmable Logic Designline, please contact me and let's chat about it (max@CliveMaxfield.com)



Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Radio
NEXT UPCOMING BROADCAST

What are the engineering and design challenges in creating successful IoT devices? These devices are usually small, resource-constrained electronics designed to sense, collect, send, and/or interpret data. Some of the devices need to be smart enough to act upon data in real time, 24/7. Are the design challenges the same as with embedded systems, but with a little developer- and IT-skills added in? What do engineers need to know? Rick Merritt talks with two experts about the tools and best options for designing IoT devices in 2016. Specifically the guests will discuss sensors, security, and lessons from IoT deployments.
Like Us on Facebook
Special Video Section
Linear Technology’s LT8330 and LT8331, two Low Quiescent ...
The quality and reliability of Mill-Max's two-piece ...
01:34
The quality and reliability of Mill-Max's two-piece ...
LED lighting is an important feature in today’s and future ...
05:27
The LT8602 has two high voltage buck regulators with an ...
05:18
Silego Technology’s highly versatile Mixed-signal GreenPAK ...
The quality and reliability of Mill-Max's two-piece ...
01:34
Why the multicopter? It has every thing in it. 58 of ...
Security is important in all parts of the IoT chain, ...
Infineon explains their philosophy and why the multicopter ...
The LTC4282 Hot SwapTM controller allows a board to be ...
This video highlights the Zynq® UltraScale+™ MPSoC, and sho...
Homeowners may soon be able to store the energy generated ...
The LTC®6363 is a low power, low noise, fully differential ...
See the Virtex® UltraScale+™ FPGA with 32.75G backplane ...
Vincent Ching, applications engineer at Avago Technologies, ...
The LT®6375 is a unity-gain difference amplifier which ...
The LTC®4015 is a complete synchronous buck controller/ ...
10:35
The LTC®2983 measures a wide variety of temperature sensors ...
The LTC®3886 is a dual PolyPhase DC/DC synchronous ...