Breaking News
Comments
Newest First | Oldest First | Threaded View
kdboyce
User Rank
Author
re: Chips in Space: Lessons learned (Part 2)
kdboyce   9/30/2011 4:37:41 AM
NO RATINGS
Steve, I started my career at Lockheed Missiles and Space and my job was satellite payload analysis as well as failure modes and recovery methods to ensure getting the data back. It was less 'formal' (if I can use that word) than methods available today, but was nonetheless meticulous and involved knowing every circuit, its function, how it could fail, and what that failure would do to the rest of the systems. Good for anyone who later in their career had to debug of any type of system. Keep up the good work!

Robotics Developer
User Rank
Author
re: Chips in Space: Lessons learned (Part 2)
Robotics Developer   9/28/2011 11:03:10 PM
NO RATINGS
Again, a great series of articles! I remember trying to debug 15x15in pcbs in an array processor prototype with suspect boards on 15" extender boards. When running at full speed sometimes it would not work (had to run 1/2 clock speed - really glad we had designed in that!). Debug of completed systems is always a challenge but more so with compact systems!

jayshukl1121
User Rank
Author
re: Chips in Space: Lessons learned (Part 2)
jayshukl1121   9/28/2011 3:20:55 PM
NO RATINGS
This has been a great read. Thank you. Jigish Shukla www.knownfo.com

Sanjib.A
User Rank
Author
re: Chips in Space: Lessons learned (Part 2)
Sanjib.A   9/27/2011 5:48:44 PM
NO RATINGS
Steve, thank you! I agree.

Steve Bible
User Rank
Author
re: Chips in Space: Lessons learned (Part 2)
Steve Bible   9/26/2011 5:32:18 PM
NO RATINGS
Hi Sanjib, I would say that we did not use these formal methods. Thinking about them, these too should be a lesson learned. It takes someone on the team with this kind of knowledge to help lead a volunteer team. Thanks for the suggestion!

Sanjib.A
User Rank
Author
re: Chips in Space: Lessons learned (Part 2)
Sanjib.A   9/25/2011 6:22:10 AM
NO RATINGS
HI Steve, thank you for sharing the article! It gives me a deeper knowledge on ARISSat-1's power system. I saw the information about the failure modes of the battery you are talking about. Have you also used any of the traditional failure analysis tools such as FMEA, Fault Tree Analysis to organize the actions required to build the recovery mechanism for different probable failure modes for all the sub-systems?

Steve Bible
User Rank
Author
re: Chips in Space: Lessons learned (Part 2)
Steve Bible   9/25/2011 1:33:19 AM
NO RATINGS
Hi Sanjib, We did think about failure modes and how to recover from them. Tony Monteiro (AA2TX) wrote about the power system in the Jan/Feb 2011 issue of The AMSAT Journal. In the article he describes the failure modes of the battery. The article is available at http://tinyurl.com/3f72xvy.

Sanjib.A
User Rank
Author
re: Chips in Space: Lessons learned (Part 2)
Sanjib.A   9/24/2011 2:19:13 PM
NO RATINGS
Hi Steve, just curious to know ... did you do some kind of failure modes and effect analysis (FMEA) at the beginning of the design phase of the project? Were the modes of battery failures not considered? Anyways, I think now it becomes part of integrated knowledge base to avoid such possibilities in future. All the best for next one! :)



Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Radio
LATEST ARCHIVED BROADCAST

What are the engineering and design challenges in creating successful IoT devices? These devices are usually small, resource-constrained electronics designed to sense, collect, send, and/or interpret data. Some of the devices need to be smart enough to act upon data in real time, 24/7. Specifically the guests will discuss sensors, security, and lessons from IoT deployments.

Brought to you by:

Most Recent Comments
michigan0
 
SteveHarris0
 
realjjj
 
SteveHarris0
 
SteveHarris0
 
VicVat
 
Les_Slater
 
SSDWEM
 
witeken
Most Recent Messages
9/25/2016
4:48:30 PM
michigan0 Sang Kim First, 28nm bulk is in volume manufacturing for several years by the major semiconductor companies but not 28nm FDSOI today yet. Why not? Simply because unlike 28nm bulk the LDD(Lightly Doped Drain) to minimize hot carrier generation can't be implemented in 28nm FDSOI. Furthermore, hot carrier reliability becomes worse with scaling, That is the major reason why 28nm FDSOI is not manufacturable today and will not be. Second, how can you suppress the leakage currents from such ultra short 7nm due to the short channel effects? How thin SOI thickness is required to prevent punch-through of un-dopped 7nm FDSOI? Possibly less than 4nm. Depositing such an ultra thin film less then 4nm filum uniformly and reliably over 12" wafers at the manufacturing line is extremely difficult or not even manufacturable. If not manufacturable, the 7nm FDSOI debate is over!Third, what happens when hot carriers are generated near the drain at normal operation of 7nm FDSOI? Electrons go to the positively biased drain with no harm but where the holes to go? The holes can't go to the substrate because of the thin BOX layer. Some holes may become trapped at the BOX layer causing Vt shift. However, the vast majority of holes drift through the the un-dopped SOI channel toward the N+Source,...
Like Us on Facebook
Special Video Section
Once the base layer of a design has been taped out, making ...
In this short video we show an LED light demo to ...
The LTC2380-24 is a versatile 24-bit SAR ADC that combines ...
In this short video we show an LED light demo to ...
02:46
Wireless Power enables applications where it is difficult ...
07:41
LEDs are being used in current luxury model automotive ...
With design sizes expected to increase by 5X through 2020, ...
01:48
Linear Technology’s LT8330 and LT8331, two Low Quiescent ...
The quality and reliability of Mill-Max's two-piece ...
LED lighting is an important feature in today’s and future ...
05:27
The LT8602 has two high voltage buck regulators with an ...
05:18
Silego Technology’s highly versatile Mixed-signal GreenPAK ...
The quality and reliability of Mill-Max's two-piece ...
01:34
Why the multicopter? It has every thing in it. 58 of ...
Security is important in all parts of the IoT chain, ...
Infineon explains their philosophy and why the multicopter ...
The LTC4282 Hot SwapTM controller allows a board to be ...
This video highlights the Zynq® UltraScale+™ MPSoC, and sho...
Homeowners may soon be able to store the energy generated ...
The LTC®6363 is a low power, low noise, fully differential ...