Breaking News
Comments
Tom Van Breussegem
User Rank
Author
re: Microwatt charge pump boosts 1V to 1.8V at 90% efficiency
Tom Van Breussegem   10/11/2011 7:29:52 AM
NO RATINGS
It seems that you made an error in calculating the efficiency. The maximum theoretical efficiency of a voltage doubler turning 1V into 1.8V is allready 90%. So the additional losses of the peripheral circuitry degrades this even more.

MartinT@Sageloop
User Rank
Author
re: Microwatt charge pump boosts 1V to 1.8V at 90% efficiency
MartinT@Sageloop   10/12/2011 7:05:24 PM
NO RATINGS
You're right Tom- but efficiency approaches 90% asymptotically for 1.8V out, and the 1.8V is minimum V at max load (higher at lighter loads). General point trying to make is that it seems one can build a reasonable simple pump oscillator with these sub-uA op amps. Thanks.

MartinT@Sageloop
User Rank
Author
re: Microwatt charge pump boosts 1V to 1.8V at 90% efficiency
MartinT@Sageloop   10/12/2011 7:15:41 PM
NO RATINGS
(.. continuing).. the calcs are right, the overhead losses are very low and the output voltage is higher than 1.8V at light loads (1.8V is min). - Martin

Tom Van Breussegem
User Rank
Author
re: Microwatt charge pump boosts 1V to 1.8V at 90% efficiency
Tom Van Breussegem   10/13/2011 9:15:20 AM
NO RATINGS
OK, thanks for clarifying this, indeed nice design considering the low output power.



Radio
LATEST ARCHIVED BROADCAST

What are the engineering and design challenges in creating successful IoT devices? These devices are usually small, resource-constrained electronics designed to sense, collect, send, and/or interpret data. Some of the devices need to be smart enough to act upon data in real time, 24/7. Specifically the guests will discuss sensors, security, and lessons from IoT deployments.

Brought to you by:

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Like Us on Facebook
Special Video Section
With design sizes expected to increase by 5X through 2020, ...
01:48
Linear Technology’s LT8330 and LT8331, two Low Quiescent ...
The quality and reliability of Mill-Max's two-piece ...
LED lighting is an important feature in today’s and future ...
05:27
The LT8602 has two high voltage buck regulators with an ...
05:18
Silego Technology’s highly versatile Mixed-signal GreenPAK ...
The quality and reliability of Mill-Max's two-piece ...
01:34
Why the multicopter? It has every thing in it. 58 of ...
Security is important in all parts of the IoT chain, ...
Infineon explains their philosophy and why the multicopter ...
The LTC4282 Hot SwapTM controller allows a board to be ...
This video highlights the Zynq® UltraScale+™ MPSoC, and sho...
Homeowners may soon be able to store the energy generated ...
The LTC®6363 is a low power, low noise, fully differential ...
See the Virtex® UltraScale+™ FPGA with 32.75G backplane ...
Vincent Ching, applications engineer at Avago Technologies, ...
The LT®6375 is a unity-gain difference amplifier which ...
The LTC®4015 is a complete synchronous buck controller/ ...
10:35
The LTC®2983 measures a wide variety of temperature sensors ...
The LTC®3886 is a dual PolyPhase DC/DC synchronous ...