Breaking News
Comments
Newest First | Oldest First | Threaded View
umanath.kamath
User Rank
Author
re: Achieving the lowest power in wireless sensor networks
umanath.kamath   11/29/2011 6:13:56 PM
NO RATINGS
Hi Luis, The radio can be interfaced to PSoC3 via SPI. We do have our transceivers (CYRF7936) which work on 2.4Ghz ISM band and could be useful for short range connectivity with sleep currents below 1uA. Over the longer range, one can use GSM or wi-fi connectivity to link PSoC3 to the internet for data upload. There is one custom component in PSoC design software Creator for interfacing with WLAN board from Redpine Signals.Alternatively for GSM, one can interface over UART from PSOC3 with off the shelf chip such as SIM300. Regards Umanath

umanath.kamath
User Rank
Author
re: Achieving the lowest power in wireless sensor networks
umanath.kamath   11/29/2011 6:07:20 PM
NO RATINGS
Hi Dale, Yes conservative data exchange and ad-hoc sharing of computational load while processing/transmitting data over large area could be very beneficial in power critical applications. Regards Umanath

Luis Sanchez
User Rank
Author
re: Achieving the lowest power in wireless sensor networks
Luis Sanchez   11/29/2011 12:41:44 AM
NO RATINGS
Thanks for the article. What frequency range does the PSoC3 work on? 2.4GHz ISM band? Does it include the radio? Which kind of radio? Bluetooth? Zigbee? Thanks for the very interesting topic.

Dale.Gomes
User Rank
Author
re: Achieving the lowest power in wireless sensor networks
Dale.Gomes   11/8/2011 7:51:31 PM
NO RATINGS
Conservative data exchange also 'plays' a very significant role in power conservation.



Radio
LATEST ARCHIVED BROADCAST

What are the engineering and design challenges in creating successful IoT devices? These devices are usually small, resource-constrained electronics designed to sense, collect, send, and/or interpret data. Some of the devices need to be smart enough to act upon data in real time, 24/7. Specifically the guests will discuss sensors, security, and lessons from IoT deployments.

Brought to you by:

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Like Us on Facebook
Special Video Section
With design sizes expected to increase by 5X through 2020, ...
01:48
Linear Technology’s LT8330 and LT8331, two Low Quiescent ...
The quality and reliability of Mill-Max's two-piece ...
LED lighting is an important feature in today’s and future ...
05:27
The LT8602 has two high voltage buck regulators with an ...
05:18
Silego Technology’s highly versatile Mixed-signal GreenPAK ...
The quality and reliability of Mill-Max's two-piece ...
01:34
Why the multicopter? It has every thing in it. 58 of ...
Security is important in all parts of the IoT chain, ...
Infineon explains their philosophy and why the multicopter ...
The LTC4282 Hot SwapTM controller allows a board to be ...
This video highlights the Zynq® UltraScale+™ MPSoC, and sho...
Homeowners may soon be able to store the energy generated ...
The LTC®6363 is a low power, low noise, fully differential ...
See the Virtex® UltraScale+™ FPGA with 32.75G backplane ...
Vincent Ching, applications engineer at Avago Technologies, ...
The LT®6375 is a unity-gain difference amplifier which ...
The LTC®4015 is a complete synchronous buck controller/ ...
10:35
The LTC®2983 measures a wide variety of temperature sensors ...
The LTC®3886 is a dual PolyPhase DC/DC synchronous ...