In this article there is the wrong assertion:
"...the supercapacitor will draw short circuit current from the solar cell when it is at 0V. As it charges, the current reduces according to the solar cell V-I characteristic, but at all times, the supercapacitor is drawing the maximum current it can, so it is charging at the fastest possible rate..."
This is wrong because the power delivered from source is very small when voltage is near to 0V (see magenta line on Fig.4).
If source work at MPPT then the power delivered to supercap is max and charge time is minimum.
Click on the link below to check out the collection of the Design Articles, Case Studies, Product How-To articles, Teardowns, etc... related to energy scavenging that have been published on Smart Energy Designline.
Click here: http://www.eetimes.com/design/smart-energy-design/4372778/Energy-harvesting---Design-archive
Check back frequently. The list will be updated as new articles arrive.
I like this article. Energy density for portable applications is a real limiting factor for many otherwise worthwhile or essential products. This is a good leadin to a look at advances in battery technology and capacitor technology.
What are the engineering and design challenges in creating successful IoT devices? These devices are usually small, resource-constrained electronics designed to sense, collect, send, and/or interpret data. Some of the devices need to be smart enough to act upon data in real time, 24/7. Specifically the guests will discuss sensors, security, and lessons from IoT deployments.