Breaking News
Comments
resistion
User Rank
Author
re: IMEC announces directed self-assembly process line
resistion   2/10/2012 2:54:32 PM
NO RATINGS
As I understand, each pitch/duty cycle combination is a different formulation, so how many does one need to keep in store?

double-o-nothing
User Rank
Author
re: IMEC announces directed self-assembly process line
double-o-nothing   2/20/2012 9:01:53 AM
NO RATINGS
The PS-PMMA system is targeted for 20 +/-5 nm hp. Each BCP system is only a single node solution.

goafrit
User Rank
Author
re: IMEC announces directed self-assembly process line
goafrit   2/10/2012 3:27:26 PM
NO RATINGS
This company is doing well in most of their medical products, I am surprised they are taking this path. It is far better to outsource some of these than developing them in-house.

any1
User Rank
Author
re: IMEC announces directed self-assembly process line
any1   2/10/2012 9:14:54 PM
NO RATINGS
Good question @resistion - I don't know, but I think for critical levels of something like a memory device with repeating cells at minimum pitch not very many. You would likely be limited to Tela on-grid type layout rules for the device.

krisi
User Rank
Author
re: IMEC announces directed self-assembly process line
krisi   2/12/2012 4:07:50 PM
NO RATINGS
Any idea how expensive is this approach? There must be lots of repairs required...Kris

double-o-nothing
User Rank
Author
re: IMEC announces directed self-assembly process line
double-o-nothing   2/13/2012 5:33:37 AM
NO RATINGS
If the edge is off, it could cause more problems.

double-o-nothing
User Rank
Author
re: IMEC announces directed self-assembly process line
double-o-nothing   2/24/2012 7:19:05 AM
NO RATINGS
If I have a trench filled with 4 lines and 5 spaces, and then I decrease the trench width 10%, gonna get defects.

unknown multiplier
User Rank
Author
re: IMEC announces directed self-assembly process line
unknown multiplier   2/20/2012 2:00:35 PM
NO RATINGS
At what edge separations do the lamellae start getting confused and become like spaghetti? Typically a distance of several lamellae?



Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Radio
LATEST ARCHIVED BROADCAST

What are the engineering and design challenges in creating successful IoT devices? These devices are usually small, resource-constrained electronics designed to sense, collect, send, and/or interpret data. Some of the devices need to be smart enough to act upon data in real time, 24/7. Specifically the guests will discuss sensors, security, and lessons from IoT deployments.

Brought to you by:

Like Us on Facebook
Special Video Section
The LTC3649 step-down regulator combines key features of a ...
Once the base layer of a design has been taped out, making ...
In this short video we show an LED light demo to ...
The LTC2380-24 is a versatile 24-bit SAR ADC that combines ...
In this short video we show an LED light demo to ...
02:46
Wireless Power enables applications where it is difficult ...
07:41
LEDs are being used in current luxury model automotive ...
With design sizes expected to increase by 5X through 2020, ...
01:48
Linear Technology’s LT8330 and LT8331, two Low Quiescent ...
The quality and reliability of Mill-Max's two-piece ...
LED lighting is an important feature in today’s and future ...
05:27
The LT8602 has two high voltage buck regulators with an ...
05:18
Silego Technology’s highly versatile Mixed-signal GreenPAK ...
The quality and reliability of Mill-Max's two-piece ...
01:34
Why the multicopter? It has every thing in it. 58 of ...
Security is important in all parts of the IoT chain, ...
Infineon explains their philosophy and why the multicopter ...
The LTC4282 Hot SwapTM controller allows a board to be ...
This video highlights the Zynq® UltraScale+™ MPSoC, and sho...
Homeowners may soon be able to store the energy generated ...