Design Con 2015
Breaking News
Comments
Oldest First | Newest First | Threaded View
chrisshore
User Rank
Blogger
re: Study finds that software getting more important
chrisshore   2/16/2012 9:33:43 AM
NO RATINGS
As powerful and capable hardware becomes cheaper, more standardised and easier to design in (and I believe all those things are true these days), software is increasingly the means by which product companies differentiate themselves and their products. It is also the means by which you get the most value out of the hardware. You can build all the whacky features you like into the chips but, unless the software makes use of them (and makes _good_ use of them) you're simply wasting effort and silicon. I heard a case in the not too distant past that a major mobile device manufacturer achieved a 50% increase in battery life for their product simply be re-spinning the software. It may have been possible to achieve similar gains by respinning the chips but I am willing to bet it would have been much harder and much more expensive. You're absolutely right, software design and efficient (hardware-sensitive) implementation of that design is increasingly the most important factor in developing really great products. Chris

BrianBailey
User Rank
Blogger
re: Study finds that software getting more important
BrianBailey   2/16/2012 5:53:06 PM
NO RATINGS
Good point Chris. In my April series on power, I know I will have one paper on power optimization from software and I hope there will be more submitted on that very subject.

rpcy
User Rank
Rookie
re: Study finds that software getting more important
rpcy   2/23/2012 7:49:31 PM
NO RATINGS
Chris is right on. HW folks go nuts to save a few percentage points on power or performance, and then have an epiphany when they realize how often a quick decision by the SW team can make a 10x or more difference. I think this is mostly because the HW team lives and breathes this stuff, and is keenly aware of the implications of what they choose, but the SW team has a much harder time seeing the implications of some of their choices.

chrisshore
User Rank
Blogger
re: Study finds that software getting more important
chrisshore   2/24/2012 10:34:14 AM
NO RATINGS
Thanks! There is also the consideration that changing a chip is hard and expensive compared to changing software (no, I'm not playing down software engineering cost but it does pale a little when compared with the cost of a set of masks...). So, chip designers do need to think a lot longer and harder (and model a lot more) in order to make the "right" decisions. An iterative process is not really viable and trial-and-error is very expensive. SW developers do have the advantage of being able to iterate designs much more quickly and try things out over a longer period. But SW engineers are newer at the game and have a lot to learn about designing in power-efficiency from the ground up. If your OS scheduler is designed correctly, it matters not what you do in your application, power consumption will be lousy!

cdhmanning
User Rank
Rookie
re: Study finds that software getting more important
cdhmanning   2/26/2012 9:44:56 PM
NO RATINGS
If you have hardware teams and software teams you're screwed! Embedded systems should be co-designed. It is not enough to just make hardware with power saving modes - or whatever - features. The interfaces need to be presented so that they are readily accessed by the software in a usable fashion. What seems to be a trivial issue from a software (or hardware) point of view can be massive from the other side of the fence. I once worked on a project where a peripheral could be connected via either a PCI equivalent bus or an internal USB bus. The hw engineer chose to use the PCI bus. The impact of this decision was the addition of a PCI software subsystem - and really complex sleep mode power handling. The USB option would have been trivial to manage. Net difference: approx 4 extra man months of effort, a two month delay in product shipment and an emergency software patch releases.

chrisshore
User Rank
Blogger
re: Study finds that software getting more important
chrisshore   2/27/2012 9:30:26 AM
NO RATINGS
I couldn't agree with co-design more. Like you, I've been on projects where the HW design has been essentially completed without involving at least the SW architects at a very early stage. You very clearly illustrate the potential costs of making that kind of mistake. Chris

Cloud2GroundGuru
User Rank
Rookie
re: Study finds that software getting more important
Cloud2GroundGuru   3/19/2012 9:17:21 PM
NO RATINGS
We are using software extensively in every embedded project we undertake. The good news is there are embedded engineers out there who can wear both hats - Chip-level HW design and bare metal programmer. The bad news is they are in short supply. The entire embedded industry is moving toward a data-centric platform on both the consumer products and industrial side so data scientists with experience in both are another valuable resource to add if you can find one.



Top Comments of the Week
Flash Poll
Like Us on Facebook

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
EE Life
Frankenstein's Fix, Teardowns, Sideshows, Design Contests, Reader Content & More
Carlos Bueno

Adventures in Userland
Carlos Bueno
Post a comment
Editor’s Note: Excerpted from Lauren Ipsum: A Story About Computer Science and Other Improbable Things, author Carlos Bueno introduces us to Lauren and her adventures in Userland. ...

Max Maxfield

Tired Old iPad 2 vs. Shiny New iPad Air 2
Max Maxfield
9 comments
I remember when the first iPad came out deep in the mists of time we used to call 2010. Actually, that's only four years ago, but it seems like a lifetime away -- I mean; can you remember ...

Martin Rowe

Make This Engineering Museum a Reality
Martin Rowe
Post a comment
Vincent Valentine is a man on a mission. He wants to make the first house to ever have a telephone into a telephone museum. Without help, it may not happen.

Rich Quinnell

Making the Grade in Industrial Design
Rich Quinnell
16 comments
As every developer knows, there are the paper specifications for a product design, and then there are the real requirements. The paper specs are dry, bland, and rigidly numeric, making ...

Special Video Section
The LT8640 is a 42V, 5A synchronous step-down regulator ...
The LTC2000 high-speed DAC has low noise and excellent ...
How do you protect the load and ensure output continues to ...
General-purpose DACs have applications in instrumentation, ...
Linear Technology demonstrates its latest measurement ...
10:29
Demos from Maxim Integrated at Electronica 2014 show ...
Bosch CEO Stefan Finkbeiner shows off latest combo and ...
STMicroelectronics demoed this simple gesture control ...
Keysight shows you what signals lurk in real-time at 510MHz ...
TE Connectivity's clear-plastic, full-size model car shows ...
Why culture makes Linear Tech a winner.
Recently formed Architects of Modern Power consortium ...
Specially modified Corvette C7 Stingray responds to ex Indy ...
Avago’s ACPL-K30T is the first solid-state driver qualified ...
NXP launches its line of multi-gate, multifunction, ...
Doug Bailey, VP of marketing at Power Integrations, gives a ...
See how to ease software bring-up with DesignWare IP ...
DesignWare IP Prototyping Kits enable fast software ...
This video explores the LT3086, a new member of our LDO+ ...
In today’s modern electronic systems, the need for power ...