Design Con 2015
Breaking News
Comments
Newest First | Oldest First | Threaded View
Page 1 / 2   >   >>
Jason_Liu
User Rank
Rookie
re: Darkhorse litho technologies stay in NGL race
Jason_Liu   2/19/2012 7:14:17 AM
NO RATINGS
Perhaps, regarding as the viewpoint of mass-production, the approach to improve the common DOF of the different characteristics of pattern,ex. iso- vs. dense- ,or line vs. space, is more practical and economic than that to put all resource to enhance the resolution.

Diogenes53
User Rank
Rookie
re: Darkhorse litho technologies stay in NGL race
Diogenes53   2/19/2012 5:16:20 AM
NO RATINGS
The dream of e-beam direct write has been around as long as x-ray lithography, and just as successful. The e-beam problems of throughput, data management and error correction simply cannot be solved in time, or economically. EUV, or, more correctly, soft x-ray projection lithography, continues to suffer from very x-ray like problems of decades ago. The only technology with the potential to complement optical lithography is imprint, which essentially is optical lithography: it uses an I-line source, I-line resists, and quartz based photomasks. Defects are a more manageable challenge than those facing EBDW and SXPL (EUV), particularly in memory. Lithography will bifurcate into solutions for logic and solutions for memory.

Diogenes53
User Rank
Rookie
re: Darkhorse litho technologies stay in NGL race
Diogenes53   2/19/2012 5:07:26 AM
NO RATINGS
H

rick merritt
User Rank
Author
re: Darkhorse litho technologies stay in NGL race
rick merritt   2/18/2012 2:13:45 AM
NO RATINGS
I wonder if the co-existance of several litho techs will make the economics tougher (lower volumes for all).

resistion
User Rank
CEO
re: Darkhorse litho technologies stay in NGL race
resistion   2/18/2012 12:54:17 AM
NO RATINGS
E-beam is more mature than optical for sure. But electrons, primary, photo-, or secondary, are prone to random disturbance. And they go into the substrate. So the interest in DSA, though it seems sensitive to the guiding pattern size.

ebmfuser
User Rank
Rookie
re: Darkhorse litho technologies stay in NGL race
ebmfuser   2/17/2012 11:06:42 PM
NO RATINGS
AND, the cost savings in masks alone would be enormous!!!

ebmfuser
User Rank
Rookie
re: Darkhorse litho technologies stay in NGL race
ebmfuser   2/17/2012 11:04:02 PM
NO RATINGS
Truly a shame that more 'professionals' don't look more seriously at e-beam lithography themselves, and not take the word of people in the photomask industry, who would directly be threatened if mask-less lithography came into popularity. E-beam litho has demonstrated nano-level capability for more than 20 years, with comparative overlay capability equaling the best aligners out there. Yes, throughput is an issue, but at 1/6 (or less) the cost of an good immersion stepper, you can buy several!!! Truth is that even the finest nano-imprint tool or EUV stepper will require masks, and they will only be available via e-beam lithography (as well as being ridiculously expensive and short lived). Direct write is a viable technology - today!

resistion
User Rank
CEO
re: Darkhorse litho technologies stay in NGL race
resistion   2/17/2012 9:18:37 AM
NO RATINGS
The critical layer tools need to be double or higher throughput, along with the track.

resistion
User Rank
CEO
re: Darkhorse litho technologies stay in NGL race
resistion   2/17/2012 6:33:17 AM
NO RATINGS
I think we can only count 10 nm and 7 nm, then what..and that would not be single patterning anymore either. CD variations on the order of lattice constants.

resistion
User Rank
CEO
re: Darkhorse litho technologies stay in NGL race
resistion   2/17/2012 6:19:31 AM
NO RATINGS
EUV doesn't have so many nodes left. Unless you mean to include the next wavelength.

Page 1 / 2   >   >>


Top Comments of the Week
Flash Poll
Like Us on Facebook

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
EE Life
Frankenstein's Fix, Teardowns, Sideshows, Design Contests, Reader Content & More
Carlos Bueno

Adventures in Userland
Carlos Bueno
Post a comment
Editor’s Note: Excerpted from Lauren Ipsum: A story about computer science and other improbable things, author Carlos Bueno introduces us to Lauren and her adventures in ...

Max Maxfield

Tired Old iPad 2 vs. Shiny New iPad Air 2
Max Maxfield
9 comments
I remember when the first iPad came out deep in the mists of time we used to call 2010. Actually, that's only four years ago, but it seems like a lifetime away -- I mean; can you remember ...

Martin Rowe

Make This Engineering Museum a Reality
Martin Rowe
Post a comment
Vincent Valentine is a man on a mission. He wants to make the first house to ever have a telephone into a telephone museum. Without help, it may not happen.

Rich Quinnell

Making the Grade in Industrial Design
Rich Quinnell
16 comments
As every developer knows, there are the paper specifications for a product design, and then there are the real requirements. The paper specs are dry, bland, and rigidly numeric, making ...

Special Video Section
The LT8640 is a 42V, 5A synchronous step-down regulator ...
The LTC2000 high-speed DAC has low noise and excellent ...
How do you protect the load and ensure output continues to ...
General-purpose DACs have applications in instrumentation, ...
Linear Technology demonstrates its latest measurement ...
10:29
Demos from Maxim Integrated at Electronica 2014 show ...
Bosch CEO Stefan Finkbeiner shows off latest combo and ...
STMicroelectronics demoed this simple gesture control ...
Keysight shows you what signals lurk in real-time at 510MHz ...
TE Connectivity's clear-plastic, full-size model car shows ...
Why culture makes Linear Tech a winner.
Recently formed Architects of Modern Power consortium ...
Specially modified Corvette C7 Stingray responds to ex Indy ...
Avago’s ACPL-K30T is the first solid-state driver qualified ...
NXP launches its line of multi-gate, multifunction, ...
Doug Bailey, VP of marketing at Power Integrations, gives a ...
See how to ease software bring-up with DesignWare IP ...
DesignWare IP Prototyping Kits enable fast software ...
This video explores the LT3086, a new member of our LDO+ ...
In today’s modern electronic systems, the need for power ...