Design Con 2015
Breaking News
Comments
Newest First | Oldest First | Threaded View
Page 1 / 3   >   >>
phoenixdave
User Rank
Rookie
re: AMD relinquishes stake in Globalfoundries
phoenixdave   3/8/2012 11:53:58 AM
NO RATINGS
Thanks Dylan. Other sources seem to agree with your assessment. I guess some self-described "reliable sources" are semi-worthless. Sorry for the trouble.

mcgrathdylan
User Rank
Blogger
re: AMD relinquishes stake in Globalfoundries
mcgrathdylan   3/8/2012 8:33:28 AM
NO RATINGS
Reports about a TSMC production stoppage at 28-nm appear to have been originated by the aptly named Semi Accurate. We are checking into it. http://semiaccurate.com/2012/03/07/tsmc-suddenly-halts-28nm-production/

mcgrathdylan
User Rank
Blogger
re: AMD relinquishes stake in Globalfoundries
mcgrathdylan   3/8/2012 7:15:26 AM
NO RATINGS
@phoenixdave (and everyone else)-I've done some checking, and it's my assessment that this report about TSMC halting 28-nm production is inaccurate (not even semi-accurate). Certainly, TSMC has had some hiccups at 28-nm. But halting production several weeks ago? I don't think so. TSMC said its policy is not to comment on rumors. But a spokeswoman for the company, Elizabeth Sun, also told me via email that 28-nm production is normal and that customers are fully aware of TSMC's production status. It was also pointed out to me when I asked around about this that both Xilinx and rival Altera have within the past week or so issued announcements about 28-nm products shipping. Both use TSMC for manufacturing. Why would either of these companies trumpet 28-nm production if they knew that their foundry supplier had shut down it's 28-nm production lines? I don't see it. http://press.xilinx.com/phoenix.zhtml?c=212763&p=irol-newsArticle&ID=1667836&highlight= http://www.altera.com/corporate/news_room/releases/2012/products/nr-stratix5-production.html

phoenixdave
User Rank
Rookie
re: AMD relinquishes stake in Globalfoundries
phoenixdave   3/7/2012 8:05:23 PM
NO RATINGS
Thanks Dylan, I was hoping you would follow up..

Peter Clarke
User Rank
Blogger
re: AMD relinquishes stake in Globalfoundries
Peter Clarke   3/7/2012 6:37:57 PM
NO RATINGS
I believe at the last count they are $10 billion to $15 billion deep. I think Abu Dhabi has the money to deepen those pockets. They may have to.

Peter Clarke
User Rank
Blogger
re: AMD relinquishes stake in Globalfoundries
Peter Clarke   3/7/2012 6:36:24 PM
NO RATINGS
Any affect on AMD's decision will depend on who you are quoting. Who are you quoting PhoenixDave?

phoenixdave
User Rank
Rookie
re: AMD relinquishes stake in Globalfoundries
phoenixdave   3/7/2012 4:32:52 PM
NO RATINGS
"TSMC halted 28nm production in mid-February according to a report..." Wonder how this will affect AMDs decision?

pinhead1
User Rank
Rookie
re: AMD relinquishes stake in Globalfoundries
pinhead1   3/6/2012 7:02:22 PM
NO RATINGS
http://en.wikipedia.org/wiki/ISDA See the 2nd line. I guess the list of companies participating in the Fab Club is in the public domain.

mcgrathdylan
User Rank
Blogger
re: AMD relinquishes stake in Globalfoundries
mcgrathdylan   3/6/2012 6:59:14 PM
NO RATINGS
I don't believe that AMD had 51 percent stake originally. Even if you go back to the initial announcement in October 2008, AMD was only going to have about 44 percent of what was then called "The Foundry Company," while ATIC owned by 56 percent. http://www.globalfoundries.com/newsroom/2008/20081006.aspx

Dr_Trevorkian
User Rank
Rookie
re: AMD relinquishes stake in Globalfoundries
Dr_Trevorkian   3/6/2012 6:52:30 PM
NO RATINGS
It is interesting because I remember that when they spun off Global Foundries they took a 51% share in it, and had the requirement of having a majority of board members. This was due to the cross licensing agreement, although this may have changed especially with the anti-trust settlement with Intel.

Page 1 / 3   >   >>


Top Comments of the Week
Flash Poll
Like Us on Facebook

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
EE Life
Frankenstein's Fix, Teardowns, Sideshows, Design Contests, Reader Content & More
Max Maxfield

Max's BADASS Display: A Comedy of Errors
Max Maxfield
3 comments
Good grief -- where does the time go? I first determined to build my Bodacious Acoustic Diagnostic Astoundingly Superior Spectromatic (BADASS) display way back in the mists of time we used ...

<b><a href=Betajet">

The Circle – The Future's Imperfect in the Present Tense
Betajet
5 comments
The Circle, a satirical, dystopian novel published in 2013 by San Francisco-based writer Dave Eggers, is about a large, very powerful technology company that combines aspects of Google, ...

Martin Rowe

Make This Engineering Museum a Reality
Martin Rowe
Post a comment
Vincent Valentine is a man on a mission. He wants to make the first house to ever have a telephone into a telephone museum. Without help, it may not happen.

Rich Quinnell

Making the Grade in Industrial Design
Rich Quinnell
16 comments
As every developer knows, there are the paper specifications for a product design, and then there are the real requirements. The paper specs are dry, bland, and rigidly numeric, making ...

Special Video Section
The LT8640 is a 42V, 5A synchronous step-down regulator ...
The LTC2000 high-speed DAC has low noise and excellent ...
How do you protect the load and ensure output continues to ...
General-purpose DACs have applications in instrumentation, ...
Linear Technology demonstrates its latest measurement ...
10:29
Demos from Maxim Integrated at Electronica 2014 show ...
Bosch CEO Stefan Finkbeiner shows off latest combo and ...
STMicroelectronics demoed this simple gesture control ...
Keysight shows you what signals lurk in real-time at 510MHz ...
TE Connectivity's clear-plastic, full-size model car shows ...
Why culture makes Linear Tech a winner.
Recently formed Architects of Modern Power consortium ...
Specially modified Corvette C7 Stingray responds to ex Indy ...
Avago’s ACPL-K30T is the first solid-state driver qualified ...
NXP launches its line of multi-gate, multifunction, ...
Doug Bailey, VP of marketing at Power Integrations, gives a ...
See how to ease software bring-up with DesignWare IP ...
DesignWare IP Prototyping Kits enable fast software ...
This video explores the LT3086, a new member of our LDO+ ...
In today’s modern electronic systems, the need for power ...