Breaking News
Comments
Newest First | Oldest First | Threaded View
Page 1 / 2   >   >>
timemerchant
User Rank
Author
re: MIPS said to be up for sale
timemerchant   4/20/2012 11:10:27 AM
NO RATINGS
I used MIPS for almost ten years, but their patents for the unaligned instructions that Lexra never used, should not have been awarded (prior processors had unaligned access). MIPS closed down a company that was winning more customers. When you loose Sony, Nintendo etc you obviously upset people. Gouging out eyeballs in Nintendo's case was clearly visible in the annual statements. The SysAD and SysCMD bus was the next worst thing to try and use, plus the higher prices for interface chips to use this silly standard. PowerPC took out the high end, and ARM with reasonable licence fees took out the low end. Instruction sets are unimportant when writing in C; the ecosystem is more important. ARM have done well at MIPS expense.

The MicroMan
User Rank
Author
re: MIPS said to be up for sale
The MicroMan   4/19/2012 7:04:48 PM
NO RATINGS
MIPS lost out when IBM took over the last generation of video games with IBM's Cell processor and the like. A huge royalty revenue soon dried up for MIPS, which was never replaced. A couple new spins of MIPS cores came out, but those didn't go far. Interests in China, which seems highly motivated to advance in high-tech computing, could pick up a great portfolio of processor patents and know-how by buying MIPS Technology, also resolving many potential disputes in regards to IP. The Godson processor knocks off the MIPS architecture. If a company in China bought MIPS, it might be a strange reversal to send IP revenues to China. But it is sad that such an icon seems to be falling to its knees.

moronda
User Rank
Author
re: MIPS said to be up for sale
moronda   4/19/2012 3:29:48 PM
NO RATINGS
Hey, does Sandeep Vij get held accountable for total failure? Nice job Sandeep of turning around MIPS! "Team MIPS," said Vij, "is much more than just one company or one building surrounded by four walls, I've found out." By "Team MIPS," Vij means all the companies that use MIPS cores in chips, MIPS architecture licensees, and those who develop tools, platforms and software that run on MIPS. "They all have tremendous loyalty for MIPS. They all want us to succeed," Vij explained. "When you have that many well wishers, you know you can lean on them." I guess all those good wishes didn't lead to revenue? Has he just realized that ARM has and will continue to completely eat his lunch and he has no way to change that? So now he just wants to get paid and get out of there? I have to imagine all the MIPS employees stopped working on 4/13 and are sending resumes to ARM. What a misery pit that place must be.

JohnJonesman
User Rank
Author
re: MIPS said to be up for sale
JohnJonesman   4/17/2012 5:23:17 PM
NO RATINGS
For cry out loud?!: This Peter Clarke "reporter" wrote a few days ago that Broadcom, Cavium and Cisco license MIPS IP: http://www.eetimes.com/electronics-blogs/other/4370937/Would-the-Chinese-buy-MIPS

JohnJonesman
User Rank
Author
re: MIPS said to be up for sale
JohnJonesman   4/17/2012 5:18:00 PM
NO RATINGS
The last article Peter Clarke wrote about MIPS sale was inaccurate (he has a habit of doing that). Now he rewrites something Bloomberg reported. Can't EEtimes hire competent reporters these days, instead of just rehashing articles written by real reporters?

abraxalito
User Rank
Author
re: MIPS said to be up for sale
abraxalito   4/17/2012 1:38:07 AM
NO RATINGS
"MIPS..has hired Goldman Sachs Group Inc. to identify and negotiate with potential acquirers of the company.." - perhaps someone has Kermit's telephone number to hand?

John.Donovan
User Rank
Author
re: MIPS said to be up for sale
John.Donovan   4/16/2012 7:36:11 PM
NO RATINGS
Kinnar's right. They have great talent and a valuable patent portfolio. They're unlikely to just drop out of site.

Kinnar
User Rank
Author
re: MIPS said to be up for sale
Kinnar   4/16/2012 9:11:01 AM
NO RATINGS
If some quality buyer comes, he will be better able to utilized the quality resources of MIPS, it totally depended on the decision makers where they want to take the company, the quality manpower will always there at the bottom level.

GREATTerry
User Rank
Author
re: MIPS said to be up for sale
GREATTerry   4/16/2012 3:11:54 AM
NO RATINGS
MIPS once was a bright star in 90's. Just wonder what value it can provide to the new buyer.

daleste
User Rank
Author
re: MIPS said to be up for sale
daleste   4/14/2012 10:06:32 PM
NO RATINGS
It is sad when companies die. ARM did a good job of building an IP business. MIPS had a bubble then dropped out of sight.

Page 1 / 2   >   >>


Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Radio
LATEST ARCHIVED BROADCAST

What are the engineering and design challenges in creating successful IoT devices? These devices are usually small, resource-constrained electronics designed to sense, collect, send, and/or interpret data. Some of the devices need to be smart enough to act upon data in real time, 24/7. Specifically the guests will discuss sensors, security, and lessons from IoT deployments.

Brought to you by:

Most Recent Comments
michigan0
 
SteveHarris0
 
realjjj
 
SteveHarris0
 
SteveHarris0
 
VicVat
 
Les_Slater
 
SSDWEM
 
witeken
Most Recent Messages
9/25/2016
4:48:30 PM
michigan0 Sang Kim First, 28nm bulk is in volume manufacturing for several years by the major semiconductor companies but not 28nm FDSOI today yet. Why not? Simply because unlike 28nm bulk the LDD(Lightly Doped Drain) to minimize hot carrier generation can't be implemented in 28nm FDSOI. Furthermore, hot carrier reliability becomes worse with scaling, That is the major reason why 28nm FDSOI is not manufacturable today and will not be. Second, how can you suppress the leakage currents from such ultra short 7nm due to the short channel effects? How thin SOI thickness is required to prevent punch-through of un-dopped 7nm FDSOI? Possibly less than 4nm. Depositing such an ultra thin film less then 4nm filum uniformly and reliably over 12" wafers at the manufacturing line is extremely difficult or not even manufacturable. If not manufacturable, the 7nm FDSOI debate is over!Third, what happens when hot carriers are generated near the drain at normal operation of 7nm FDSOI? Electrons go to the positively biased drain with no harm but where the holes to go? The holes can't go to the substrate because of the thin BOX layer. Some holes may become trapped at the BOX layer causing Vt shift. However, the vast majority of holes drift through the the un-dopped SOI channel toward the N+Source,...
Like Us on Facebook
Special Video Section
Once the base layer of a design has been taped out, making ...
In this short video we show an LED light demo to ...
The LTC2380-24 is a versatile 24-bit SAR ADC that combines ...
In this short video we show an LED light demo to ...
02:46
Wireless Power enables applications where it is difficult ...
07:41
LEDs are being used in current luxury model automotive ...
With design sizes expected to increase by 5X through 2020, ...
01:48
Linear Technology’s LT8330 and LT8331, two Low Quiescent ...
The quality and reliability of Mill-Max's two-piece ...
LED lighting is an important feature in today’s and future ...
05:27
The LT8602 has two high voltage buck regulators with an ...
05:18
Silego Technology’s highly versatile Mixed-signal GreenPAK ...
The quality and reliability of Mill-Max's two-piece ...
01:34
Why the multicopter? It has every thing in it. 58 of ...
Security is important in all parts of the IoT chain, ...
Infineon explains their philosophy and why the multicopter ...
The LTC4282 Hot SwapTM controller allows a board to be ...
This video highlights the Zynq® UltraScale+™ MPSoC, and sho...
Homeowners may soon be able to store the energy generated ...
The LTC®6363 is a low power, low noise, fully differential ...