Breaking News
Comments
DrFPGA
User Rank
Author
re: Accelerate partial reconfiguration with a 100% hardware solution
DrFPGA   5/28/2012 4:59:39 PM
NO RATINGS
Seems to me that the tools have a long way to go to make dynamic reconfiguration something that most designs will be able to do. For example, the need to have the decoupling logic explicitly defined (if I'm reading the article correctly) is the type of thing I would expect to be handled automatically.

angelmc
User Rank
Author
re: Accelerate partial reconfiguration with a 100% hardware solution
angelmc   6/20/2012 9:27:29 AM
NO RATINGS
In the university we worked (and they still do) on a similar approach for partial reconfiguration through the ICAP but that was handeled entirely by the FPGA itself. The maximum clock frequency for the ICAP was achieved with little FPGA resources consumption.

angelmc
User Rank
Author
re: Accelerate partial reconfiguration with a 100% hardware solution
angelmc   6/20/2012 9:56:40 AM
NO RATINGS
Just a clarification: they still work with the reconfiguration engine (as they call it) that works correctly. They are working with upper layers to optimize full applications.

srikanth1986
User Rank
Author
re: Accelerate partial reconfiguration with a 100% hardware solution
srikanth1986   2/14/2013 11:26:31 AM
NO RATINGS
I had realized a 100% hw solution for PR way back in 2010. So I don't know whats so innovative about it now.



Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Radio
NEXT UPCOMING BROADCAST

What are the engineering and design challenges in creating successful IoT devices? These devices are usually small, resource-constrained electronics designed to sense, collect, send, and/or interpret data. Some of the devices need to be smart enough to act upon data in real time, 24/7. Are the design challenges the same as with embedded systems, but with a little developer- and IT-skills added in? What do engineers need to know? Rick Merritt talks with two experts about the tools and best options for designing IoT devices in 2016. Specifically the guests will discuss sensors, security, and lessons from IoT deployments.
Most Recent Comments
dnadler017
 
realjjj
 
realjjj
 
jimfordbroadcom
 
jimfordbroadcom
 
resistion
 
jimfordbroadcom
 
jimfordbroadcom
 
realjjj
Like Us on Facebook
Special Video Section
LED lighting is an important feature in today’s and future ...
05:27
The LT8602 has two high voltage buck regulators with an ...
05:18
The quality and reliability of Mill-Max's two-piece ...
01:34
Why the multicopter? It has every thing in it. 58 of ...
Security is important in all parts of the IoT chain, ...
Infineon explains their philosophy and why the multicopter ...
The LTC4282 Hot SwapTM controller allows a board to be ...
This video highlights the Zynq® UltraScale+™ MPSoC, and sho...
Homeowners may soon be able to store the energy generated ...
The LTC®6363 is a low power, low noise, fully differential ...
See the Virtex® UltraScale+™ FPGA with 32.75G backplane ...
Vincent Ching, applications engineer at Avago Technologies, ...
The LT®6375 is a unity-gain difference amplifier which ...
The LTC®4015 is a complete synchronous buck controller/ ...
10:35
The LTC®2983 measures a wide variety of temperature sensors ...
The LTC®3886 is a dual PolyPhase DC/DC synchronous ...
The LTC®2348-18 is an 18-bit, low noise 8-channel ...
The LT®3042 is a high performance low dropout linear ...