Design Con 2015
Breaking News
Comments
Newest First | Oldest First | Threaded View
elektryk321
User Rank
Rookie
re: SLC vs MLC: Which works best for high-reliability applications?
elektryk321   7/23/2012 10:48:12 AM
NO RATINGS
I have a feeling that explanation of wear mechanism is little wrong. As far I know the problem is not with trapped electrons, electrons could be always moved with force (apropriate voltage) but each time when memory is programmed or erased, move of electrons degrades the isolation properties of oxider.

John Scaramuzzo
User Rank
Rookie
re: SLC vs MLC: Which works best for high-reliability applications?
John Scaramuzzo   7/20/2012 9:50:55 PM
NO RATINGS
Charlie, really enjoyed reading your article here. The differences between SLC and MLC Flash have been a topic for discussion for quite some time and as a flash industry professional, we are constantly trying to mimic the advantages of SLC Flash in our MLC-based Solid State Drives. To add to your article, I would also like your readers to consider certain new endurance enhancement technologies that can substantially increase the native endurance and bolster reliability in MLC Flash devices. These types of innovations are blurring the lines between the SLC and MLC output and is making MLC a viable option for even the most write intensive application. Check out this white paper as a great resource for this type of technology on our website: http://smartstoragesys.com/pdfs/WP003_Guardian_Technology.pdf. -John Scaramuzzo, President, SMART Storage Systems

cdhmanning
User Rank
Rookie
re: SLC vs MLC: Which works best for high-reliability applications?
cdhmanning   7/18/2012 2:25:22 AM
NO RATINGS
Ok, maybe the answer is obvious to me because I have been working closely with NAND for the last 10 or so years...Clearly SLC has wider margins and can thus tolerate more degradation than MLC. Clearly SLC will give a huge reliability advantage. You can sometimes use MLC parts as if they were SLC parts. Many MLCs write two adjacent pages into the same cells, so if you only write every second page you can sometimes achieve SLC-like reliability in MLC. This opens up the possibility to do things like using MLC for the cost benefit, storing critical code etc in the fake-SLC area and less critical data/code in the regular MLC area. NAND is goofy stuff.For example most electronic parts tend to be more reliable at the lower end of their temperature range. NAND, OTOH, is often more prone to errors at lower temperatures. One failure mechanism you missed is read disturb. Yes, even reading NAND can corrupt data. That is particularly relevant to MLC. This has particular implications for static data like boot code which is typically not rewritten during the lifetime of the product but is read (and slowly corrupted) on every boot cycle. If you want to ensure that your NAND-based solutions are robust, ensure that the software you are using with it (file systems, boot loaders, etc) have mechanisms to mitigate against the bad side of NAND.

Kristin Lewotsky
User Rank
Blogger
re: SLC vs MLC: Which works best for high-reliability applications?
Kristin Lewotsky   7/17/2012 11:39:09 PM
NO RATINGS
Good catch--that's what I get for focusing on the text of the article rather than the graphics. I communicated with the author and we are in the process of getting an updated version of the table. Look for a revised version by tomorrow morning. Thank you for your patience and apologies for any confusion.

S.Gilden
User Rank
Rookie
re: SLC vs MLC: Which works best for high-reliability applications?
S.Gilden   7/17/2012 2:44:44 PM
NO RATINGS
FYI: the table discribing the 3-bit MLC has tex errors and pattern "100" is listed twice. Further , pattern 001 is missing.



Top Comments of the Week
Flash Poll
Like Us on Facebook

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
EE Life
Frankenstein's Fix, Teardowns, Sideshows, Design Contests, Reader Content & More
<b><a href=Betajet">

The Circle – The Future's Imperfect in the Present Tense
Betajet
5 comments
The Circle, a satirical, dystopian novel published in 2013 by San Francisco-based writer Dave Eggers, is about a large, very powerful technology company that combines aspects of Google, ...

Max Maxfield

Recommended Reads From the Engineer's Bookshelf
Max Maxfield
27 comments
I'm not sure if I read more than most folks or not, but I do I know that I spend quite a lot of time reading. I hate to be idle, so I always have a book or two somewhere about my person -- ...

Martin Rowe

Make This Engineering Museum a Reality
Martin Rowe
Post a comment
Vincent Valentine is a man on a mission. He wants to make the first house to ever have a telephone into a telephone museum. Without help, it may not happen.

Rich Quinnell

Making the Grade in Industrial Design
Rich Quinnell
16 comments
As every developer knows, there are the paper specifications for a product design, and then there are the real requirements. The paper specs are dry, bland, and rigidly numeric, making ...

Special Video Section
The LT8640 is a 42V, 5A synchronous step-down regulator ...
The LTC2000 high-speed DAC has low noise and excellent ...
How do you protect the load and ensure output continues to ...
General-purpose DACs have applications in instrumentation, ...
Linear Technology demonstrates its latest measurement ...
10:29
Demos from Maxim Integrated at Electronica 2014 show ...
Bosch CEO Stefan Finkbeiner shows off latest combo and ...
STMicroelectronics demoed this simple gesture control ...
Keysight shows you what signals lurk in real-time at 510MHz ...
TE Connectivity's clear-plastic, full-size model car shows ...
Why culture makes Linear Tech a winner.
Recently formed Architects of Modern Power consortium ...
Specially modified Corvette C7 Stingray responds to ex Indy ...
Avago’s ACPL-K30T is the first solid-state driver qualified ...
NXP launches its line of multi-gate, multifunction, ...
Doug Bailey, VP of marketing at Power Integrations, gives a ...
See how to ease software bring-up with DesignWare IP ...
DesignWare IP Prototyping Kits enable fast software ...
This video explores the LT3086, a new member of our LDO+ ...
In today’s modern electronic systems, the need for power ...