Embedded Systems Conference
Breaking News
Comments
Newest First | Oldest First | Threaded View
resistion
User Rank
Author
re: ARM TechCon explores road to 14-nm ICs
resistion   11/25/2012 6:48:27 PM
NO RATINGS
Surprised they talked about triple patterning; EUV's window practically gone now.

resistion
User Rank
Author
re: ARM TechCon explores road to 14-nm ICs
resistion   10/4/2012 2:48:50 PM
NO RATINGS
If I read tsmc correctly, they'll have a 16 nm half-node in 2014 (no NGL), then go direct to 10 nm node some time later. 14 nm is skipped.

resistion
User Rank
Author
re: ARM TechCon explores road to 14-nm ICs
resistion   10/1/2012 12:53:37 AM
NO RATINGS
I think 20 nm won't be popular for a while. It is also quite possible some will go direct from 28 nm to 14 nm, after a few years. If the patterning technology is quite expensive, you'd need to make up with higher density sooner.

Peter Clarke
User Rank
Author
re: ARM TechCon explores road to 14-nm ICs
Peter Clarke   9/19/2012 2:37:54 PM
NO RATINGS
@chipguy1 Ah but if we prevented development of 16-nm/14-nm and 10-nm nodes until all the 28-nm to 20-nm transition problems were solved, the industry would be severely delayed in ever getting to 16/14-nm. Working on multiple challenges and production nodes has been with us for a long time and one of the ways in which Moore's predictive law has been fulfilled....to date.

rfab
User Rank
Author
re: ARM TechCon explores road to 14-nm ICs
rfab   9/19/2012 1:01:13 AM
NO RATINGS
Really?You he was?You should be so-called news report of an article full of mistakes

chipguy 1
User Rank
Author
re: ARM TechCon explores road to 14-nm ICs
chipguy 1   9/17/2012 7:12:51 PM
NO RATINGS
comment 1, "FinFETs in bulk silicon are more trouble than they are worth", Horacio Mendez, ...that does look to be the case for the "16nm node" which is "20nm design rule finfet on bulk silicon". I can't see doing a SOC in FinFET unless a planar device is also offered for all my analog/mixed signal circuits and low leakage always on circuits. comment 2, How about we not talk as an industry about 10nm or 14nm until we admit at even today at 20nm will still don't have a viable 20nm strategy. Today's 20nm due to the double patterning just does not offer much if any improvement over 28nm. Even over the next 5 years it does not appear cost per transistor will be lower in 20nm vs 28nm.

song-chou-1
User Rank
Author
re: ARM TechCon explores road to 14-nm ICs
song-chou-1   9/17/2012 4:21:19 PM
NO RATINGS
I do hear foundry has found many issues with Intel's 22nm bulk Fin design point for SOCs. Top issues is supporting range of threshold voltages required for SOCs. Intel's approach which dopes the fins causes too much leakage variation and matching issues for circuit operation less than 0.9-1V supply voltage. This is all consistent with Intel's own 22nm SOC now delayed until end of 2013. Rumor is Intel might be going to SOI for 22nm SOC technology version to fix this issue. Would allow intel to implement a real undoped body FinFET.



Top Comments of the Week
Like Us on Facebook

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
EE Life
Frankenstein's Fix, Teardowns, Sideshows, Design Contests, Reader Content & More
Max Maxfield

My Mom the Radio Star
Max Maxfield
Post a comment
I've said it before and I'll say it again -- it's a funny old world when you come to think about it. Last Friday lunchtime, for example, I received an email from Tim Levell, the editor for ...

Bernard Cole

A Book For All Reasons
Bernard Cole
1 Comment
Robert Oshana's recent book "Software Engineering for Embedded Systems (Newnes/Elsevier)," written and edited with Mark Kraeling, is a 'book for all reasons.' At almost 1,200 pages, it ...

Martin Rowe

Leonard Nimoy, We'll Miss you
Martin Rowe
5 comments
Like many of you, I was saddened to hear the news of Leonard Nimoy's death. His Star Trek character Mr. Spock was an inspiration to many of us who entered technical fields.

Rich Quinnell

Making the Grade in Industrial Design
Rich Quinnell
16 comments
As every developer knows, there are the paper specifications for a product design, and then there are the real requirements. The paper specs are dry, bland, and rigidly numeric, making ...

Special Video Section
After a four-year absence, Infineon returns to Mobile World ...
A laptop’s 65-watt adapter can be made 6 times smaller and ...
An industry network should have device and data security at ...
The LTC2975 is a four-channel PMBus Power System Manager ...
In this video, a new high speed CMOS output comparator ...
The LT8640 is a 42V, 5A synchronous step-down regulator ...
The LTC2000 high-speed DAC has low noise and excellent ...
How do you protect the load and ensure output continues to ...
General-purpose DACs have applications in instrumentation, ...
Linear Technology demonstrates its latest measurement ...
10:29
Demos from Maxim Integrated at Electronica 2014 show ...
Bosch CEO Stefan Finkbeiner shows off latest combo and ...
STMicroelectronics demoed this simple gesture control ...
Keysight shows you what signals lurk in real-time at 510MHz ...
TE Connectivity's clear-plastic, full-size model car shows ...
Why culture makes Linear Tech a winner.
Recently formed Architects of Modern Power consortium ...
Specially modified Corvette C7 Stingray responds to ex Indy ...
Avago’s ACPL-K30T is the first solid-state driver qualified ...
NXP launches its line of multi-gate, multifunction, ...
Radio
LATEST ARCHIVED BROADCAST
EE Times Senior Technical Editor Martin Rowe will interview EMC engineer Kenneth Wyatt.
Flash Poll