Breaking News
Comments
Newest First | Oldest First | Threaded View
Youself
User Rank
Author
re: XMOS repositions itself as MCU company
Youself   3/4/2013 5:24:35 PM
NO RATINGS
and far more expensive... therein lies the rub

David Brown
User Rank
Author
re: XMOS repositions itself as MCU company
David Brown   10/18/2012 12:45:33 PM
NO RATINGS
Well, I know they have been active in bringing out new devices - the most recent ones having a USB 2.0 PHY integrated in the chip. However, there are least some architectural and software issues involved in using more than 64KB memory, so it is not quite as simple as putting a bigger SRAM macro in the design. So I'm not going to put money on bigger ram blocks in the next versions - but I would definitely like to see it in the future. The other big problems I see with the XMOS lie with their development tools and the limitations of the "XC" language. But it is quite possible that this has changed now with the new tools they have released - I haven't tried them, and it would be unfair to complain about old problems before checking if they are now fixed.

Peter Clarke
User Rank
Author
re: XMOS repositions itself as MCU company
Peter Clarke   10/18/2012 12:01:43 PM
NO RATINGS
@David Brown You make a good point about lack of memory. CEO Nigel Toon indicated that more components are in the pipeline, but did not wish to tip his hand about what is coming in the next three to six months. So maybe XMOS is addressing that with a respin of silicon - or perhaps not. We wait to find out.

David Brown
User Rank
Author
re: XMOS repositions itself as MCU company
David Brown   10/18/2012 9:05:31 AM
NO RATINGS
The XMOS chips are a nice architecture, but they suffer greatly from a lack of memory. There is just 64K per core for both program and data, and no sensible way to connect external memories (you can make a memory interface in software, but that uses up most of the pins and resources on the device!). With at least 512 KB ram per core, and preferably with flash for bootloading on chip, these would be far more useful devices.

JB65
User Rank
Author
re: XMOS repositions itself as MCU company
JB65   10/17/2012 2:47:28 PM
NO RATINGS
x



Radio
LATEST ARCHIVED BROADCAST

What are the engineering and design challenges in creating successful IoT devices? These devices are usually small, resource-constrained electronics designed to sense, collect, send, and/or interpret data. Some of the devices need to be smart enough to act upon data in real time, 24/7. Specifically the guests will discuss sensors, security, and lessons from IoT deployments.

Brought to you by:

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Like Us on Facebook
Special Video Section
With design sizes expected to increase by 5X through 2020, ...
01:48
Linear Technology’s LT8330 and LT8331, two Low Quiescent ...
The quality and reliability of Mill-Max's two-piece ...
LED lighting is an important feature in today’s and future ...
05:27
The LT8602 has two high voltage buck regulators with an ...
05:18
Silego Technology’s highly versatile Mixed-signal GreenPAK ...
The quality and reliability of Mill-Max's two-piece ...
01:34
Why the multicopter? It has every thing in it. 58 of ...
Security is important in all parts of the IoT chain, ...
Infineon explains their philosophy and why the multicopter ...
The LTC4282 Hot SwapTM controller allows a board to be ...
This video highlights the Zynq® UltraScale+™ MPSoC, and sho...
Homeowners may soon be able to store the energy generated ...
The LTC®6363 is a low power, low noise, fully differential ...
See the Virtex® UltraScale+™ FPGA with 32.75G backplane ...
Vincent Ching, applications engineer at Avago Technologies, ...
The LT®6375 is a unity-gain difference amplifier which ...
The LTC®4015 is a complete synchronous buck controller/ ...
10:35
The LTC®2983 measures a wide variety of temperature sensors ...
The LTC®3886 is a dual PolyPhase DC/DC synchronous ...