Breaking News
Comments
rick merritt
User Rank
Author
re: AMD to ship ARM-based server SoCs in 2014
rick merritt   10/29/2012 9:08:24 PM
NO RATINGS
Lisa Su implies but does not specifically say AMD's 2014 chip will embed the ARM cores AND the SeaMicro fabric. She says nothing to clarify if this is a system only or merchant chip, too. But the implication is this is also a merchant chip.

rick merritt
User Rank
Author
re: AMD to ship ARM-based server SoCs in 2014
rick merritt   10/29/2012 9:20:29 PM
NO RATINGS
From hot-off-the presses AMD press release: The first ARM technology-based AMD Opteron processor will integrate the AMD SeaMicro Freedom supercompute fabric, the industry's premier high-performance fabric.

Roadman0
User Rank
Author
re: AMD to ship ARM-based server SoCs in 2014
Roadman0   10/29/2012 9:58:29 PM
NO RATINGS
Seamicro fabric or servers are used by sub 1% of market today, not sure this architecture is extensible to heavy workload's such as DB systems, in Data Center, majority of there use case is around Web servers. If one wants to do Web servers they can use Multicore ARM server SOC from Calxeda and others coming to the show if market is going to grow types. So am not sure what advantage AMD has over others? I think they are done! they cannot kick the bucket to 2014, need to pay bills now.

TarraTarra!
User Rank
Author
re: AMD to ship ARM-based server SoCs in 2014
TarraTarra!   10/30/2012 12:22:55 AM
NO RATINGS
This is Rory Read's hail mary pass. ARM does make sense for AMD and maybe even in servers eventually but not in the immediate future. I thought they would likely use the strength of their GPU/APU to come out with low power ARM processors for the mobile/ultramobile markets. That is certainly a huge market. On the other hand AMD is laying off 15% of its work-force and now designing x86 AND ARM servers. It will be interesting to see how they train their sales force to sell both ARM and x86 processors into servers. x86 is not their problem, the issue for AMD has been been in execution - remember the performance lead they had with opteron and the big delays in bringing out the bulldozer designs by which time sandy bridge and ivy bridge leap-frogged them. I don't see how this would change with the same team in place. What they need is a new design team to work on this in isolation if this has to succeed.

rick merritt
User Rank
Author
re: AMD to ship ARM-based server SoCs in 2014
rick merritt   10/30/2012 12:46:22 PM
NO RATINGS
It will be interesting to see what impact Jim Keller has over the next say 18-24 months on the quality of the x86 and ARM designs to come...if he gets that much time to work his stuff.

lurchl
User Rank
Author
re: AMD to ship ARM-based server SoCs in 2014
lurchl   10/30/2012 9:26:40 PM
NO RATINGS
I was a young design engineer in AMD's analog products group when founder Jim Giles was still in it. They deleted that product area, and I left. I rejoined AMD's networking group to design and release a compliant IEEE 802.3 10BASE-2/5 tap transceiver, and supervised the design and release of a 10BASE-T predecessor StarLAN transceiver. I left AMD again a couple years before they eliminated the networking products division. I hope AMD finds a way to focus on something other than x86 processors. ARM could be one of those ways. I'd hate to see them eliminate any more product areas. There aren't too many of them left for the company.

Neo10
User Rank
Author
re: AMD to ship ARM-based server SoCs in 2014
Neo10   10/31/2012 2:11:53 AM
NO RATINGS
This is like testing the waters before taking the plunge. Perhaps they are not too sure of what to make of the ARM 64bit in server domain, but given their excellence in interconnect fabric and traditional experience in server workloads optimization they should be able to to make it take off. But it all depends on timing and positioning and if they get it right then it could be the proverbial light at the end of the tunnel they are looking for.

JeffL_2
User Rank
Author
re: AMD to ship ARM-based server SoCs in 2014
JeffL_2   11/5/2012 3:27:54 PM
NO RATINGS
Could someone clarify the use of terminology a little? Does the term "SoC" as used here just reflect the integration on a single chip of IP that includes more than one vendor, ie ARM plus someone else's fabric IP? It just seems confusing since if the fabric is part of the "system" then it's not really usable as a system until you have a least two of these talking to each other, then it's not really a "SoC" if you see what I mean. Forgive me if I'm nitpicking a bit here!

help.fulguy
User Rank
Author
re: AMD to ship ARM-based server SoCs in 2014
help.fulguy   11/10/2012 9:02:44 PM
NO RATINGS
Dressing it up nicely for a Black friday Fire Sale



Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Radio
NEXT UPCOMING BROADCAST

What are the engineering and design challenges in creating successful IoT devices? These devices are usually small, resource-constrained electronics designed to sense, collect, send, and/or interpret data. Some of the devices need to be smart enough to act upon data in real time, 24/7. Are the design challenges the same as with embedded systems, but with a little developer- and IT-skills added in? What do engineers need to know? Rick Merritt talks with two experts about the tools and best options for designing IoT devices in 2016. Specifically the guests will discuss sensors, security, and lessons from IoT deployments.
Like Us on Facebook
Special Video Section
The quality and reliability of Mill-Max's two-piece ...
01:34
The quality and reliability of Mill-Max's two-piece ...
LED lighting is an important feature in today’s and future ...
05:27
The LT8602 has two high voltage buck regulators with an ...
05:18
Silego Technology’s highly versatile Mixed-signal GreenPAK ...
The quality and reliability of Mill-Max's two-piece ...
01:34
Why the multicopter? It has every thing in it. 58 of ...
Security is important in all parts of the IoT chain, ...
Infineon explains their philosophy and why the multicopter ...
The LTC4282 Hot SwapTM controller allows a board to be ...
This video highlights the Zynq® UltraScale+™ MPSoC, and sho...
Homeowners may soon be able to store the energy generated ...
The LTC®6363 is a low power, low noise, fully differential ...
See the Virtex® UltraScale+™ FPGA with 32.75G backplane ...
Vincent Ching, applications engineer at Avago Technologies, ...
The LT®6375 is a unity-gain difference amplifier which ...
The LTC®4015 is a complete synchronous buck controller/ ...
10:35
The LTC®2983 measures a wide variety of temperature sensors ...
The LTC®3886 is a dual PolyPhase DC/DC synchronous ...
The LTC®2348-18 is an 18-bit, low noise 8-channel ...