Breaking News
Comments
Newest First | Oldest First | Threaded View
Page 1 / 2   >   >>
green_is_now
User Rank
Author
re: Non-volatile memory development gathers steam
green_is_now   12/13/2012 1:40:36 AM
NO RATINGS
I like the bubble diagram for this, but you need to add the Koreans and Japenese. Different eras with major players would be useful in this context with industry breakthroughs and who emerged, aquired...

green_is_now
User Rank
Author
re: Non-volatile memory development gathers steam
green_is_now   12/13/2012 1:33:07 AM
NO RATINGS
This will solve the need for cache speed for now. And will stay that way unless a universal memory becomes cheap enough

Koda23
User Rank
Author
re: Non-volatile memory development gathers steam
Koda23   12/12/2012 10:28:36 PM
NO RATINGS
Where does Kilopass fit into this ecosystem, or do they? I've heard of them, but don't know much about their technology outside of it being a type of IP for ASICs.

nonvolatile
User Rank
Author
re: Non-volatile memory development gathers steam
nonvolatile   12/12/2012 3:26:31 AM
NO RATINGS
Paul: FeRAM- should be made with SrBiTaO not PZT. Panasonic sold more than 500 million units Ramtron stuck to PZT and IBM could not qualify. High density FeRAM, no. Not below 130 nm because nickel Silicide being the high density metallization cannot take 750 C anneal of 3 minutes. ReRAM- as long as there is the junk science of filaments, iy is a dog. Look at may first 2011 issue of JAP. I have 3 papers showing not to make NiO with filaments. At IEDM, not one paper referenced this work. It is amazing! Carlos Araujo

resistion
User Rank
Author
re: Non-volatile memory development gathers steam
resistion   12/7/2012 11:36:14 PM
NO RATINGS
Should be 3D scaling now, rather than litho. Also, thought PCM had to be confined.

Jim Handy01
User Rank
Author
re: Non-volatile memory development gathers steam
Jim Handy01   12/7/2012 10:57:11 PM
NO RATINGS
Interestingly enough, Cypress acquired technology from an MRAM company named NVE almost a decade ago, creating an MRAM division, then spun it off in 2005. See http://www.cypress.com/?rID=851

Paul Boldt
User Rank
Blogger
re: Non-volatile memory development gathers steam
Paul Boldt   12/7/2012 5:54:15 PM
NO RATINGS
Thanks. For sure there is much more going on out there in NVM. The article is really a look at a small slice of this activity, resulting from the Micron/AgigA Press Release crossing my desk. "Last one sitting" ... at writing I was thinking of which relationships hold within this small slice. Finally, I have often found "niche" can be viewed from different angles. A while back I wrote a piece for EETimes that looked at MRAM, PRAM and FRAM. The first two were getting all the attention while FRAM was quietly generating revenue. In the end there is a much bigger discussion here. Paul

R G.Neale
User Rank
Author
re: Non-volatile memory development gathers steam
R G.Neale   12/7/2012 4:25:52 PM
NO RATINGS
Paul-Last one standing? Ignoring niche market applications, the simple answer to your question is the technology that scales lithographically, with of course the need to be competitive in price, performance and reliability with alternative design/device solutions. I wonder why you did not include Samsung on your diagram, or even the IBM-Hynix PCM tie up, which appears to be focusing on the annular electrode structures as the saving grace for PCM.

resistion
User Rank
Author
re: Non-volatile memory development gathers steam
resistion   12/7/2012 5:52:16 AM
NO RATINGS
The diagram should include Elpida to make Micron's dabbling look even more outrageous.

Paul Boldt
User Rank
Blogger
re: Non-volatile memory development gathers steam
Paul Boldt   12/6/2012 8:46:54 PM
NO RATINGS
Thanks for the interest Kris. Next-generation NVM is fascinating because of the new technical ground for sure. It did strike me though that there is also quite a bit of jockeying on the corporate side. Paul

Page 1 / 2   >   >>


Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Radio
NEXT UPCOMING BROADCAST

What are the engineering and design challenges in creating successful IoT devices? These devices are usually small, resource-constrained electronics designed to sense, collect, send, and/or interpret data. Some of the devices need to be smart enough to act upon data in real time, 24/7. Are the design challenges the same as with embedded systems, but with a little developer- and IT-skills added in? What do engineers need to know? Rick Merritt talks with two experts about the tools and best options for designing IoT devices in 2016. Specifically the guests will discuss sensors, security, and lessons from IoT deployments.
Most Recent Comments
dnadler017
 
realjjj
 
realjjj
 
jimfordbroadcom
 
jimfordbroadcom
 
resistion
 
jimfordbroadcom
 
jimfordbroadcom
 
realjjj
Like Us on Facebook
Special Video Section
LED lighting is an important feature in today’s and future ...
05:27
The LT8602 has two high voltage buck regulators with an ...
05:18
The quality and reliability of Mill-Max's two-piece ...
01:34
Why the multicopter? It has every thing in it. 58 of ...
Security is important in all parts of the IoT chain, ...
Infineon explains their philosophy and why the multicopter ...
The LTC4282 Hot SwapTM controller allows a board to be ...
This video highlights the Zynq® UltraScale+™ MPSoC, and sho...
Homeowners may soon be able to store the energy generated ...
The LTC®6363 is a low power, low noise, fully differential ...
See the Virtex® UltraScale+™ FPGA with 32.75G backplane ...
Vincent Ching, applications engineer at Avago Technologies, ...
The LT®6375 is a unity-gain difference amplifier which ...
The LTC®4015 is a complete synchronous buck controller/ ...
10:35
The LTC®2983 measures a wide variety of temperature sensors ...
The LTC®3886 is a dual PolyPhase DC/DC synchronous ...
The LTC®2348-18 is an 18-bit, low noise 8-channel ...
The LT®3042 is a high performance low dropout linear ...