Breaking News
Comments
Newest First | Oldest First | Threaded View
Page 1 / 2   >   >>
the_floating_ gate
User Rank
Rookie
re: 28-nm FDSOI is production ready, says ST
the_floating_ gate   12/13/2012 2:26:15 AM
NO RATINGS
This is huge. (And it's a huge cost-saver -- IBS estimates per-die FD-SOI cost is about half that of bulk - see... Intel looked at both...SOI and bulk... Immersion lithography and double patterning will be used where necessary, and no extra mask layers are needed so the additional cost is only 2 - 3%. And apparently it's scalable to 14 nm! This story is 18 months and you keep repeating the same thing (significantly lower cost) over and over again - any real data - like comparison in $/Euro and cent? http://www.electroiq.com/blogs/chipworks_real_chips_blog/2011/05.html Intel details 22nm trigate SoC process at IEDM December 11, 2012 12:23 PM by Dick James http://www.electroiq.com/blogs/chipworks_real_chips_blog.html

resistion
User Rank
CEO
re: 28-nm FDSOI is production ready, says ST
resistion   12/12/2012 1:24:03 AM
NO RATINGS
If more IEDM attendees had the opportunity to view the concurrent FD-SOI conference papers, acceptance would definitely have been faster. The IEDM people won't advertise the FD-SOI meeting, so unless you were already in the FD-SOI community, you'd never know. You wouldn't be able to "convert" supporters from outside, who had been attending IEDM without knowledge of FD-SOI. So, this low profile has been deliberate, for so long?

depleted
User Rank
Rookie
re: 28-nm FDSOI is production ready, says ST
depleted   12/11/2012 10:10:08 PM
NO RATINGS
bad link try this one http://www.advancedsubstratenews.com/2012/11/ibs-study-concludes-fd-soi-most-cost-effective-technology-choice-at-28nm-and-20nm/

depleted
User Rank
Rookie
re: 28-nm FDSOI is production ready, says ST
depleted   12/11/2012 9:53:05 PM
NO RATINGS
it looks like everbody's discovering now fdsoi qualities in cost saving, higher speed and power improvements. funny ! this discovery was under your eyes guys but you just didn't see it, growing for years... Now the choice seems clear, and even bohr at the end of his career should recognise its mistake : he should have chosen fdsoi at 22nm in 2011 indeed.

Adele.Hars
User Rank
Rookie
re: 28-nm FDSOI is production ready, says ST
Adele.Hars   12/11/2012 5:17:54 PM
NO RATINGS
ST also said of FD-SOI: Silicon-verified process technology delivers 30% higher speed and up to 50% improvement in power. This is huge. (And it's a huge cost-saver -- IBS estimates per-die FD-SOI cost is about half that of bulk - see http://www.advancedsubstratenews.com/2012/11/ibs-study-concludes-fd-soi-most-cost-effective-technology-choice-at-28nm-and-20nm/) re: timing. Also note that the SOI Consortium as been running these symposia around major conferences for going on 4 yrs now. They are alway lively and well-attended. The papers are typically posted on fully-depleted section of their website (www.soiconsortium.org) shortly after.

Archeologist
User Rank
Rookie
re: 28-nm FDSOI is production ready, says ST
Archeologist   12/11/2012 3:54:26 PM
NO RATINGS
A bold move by ST to differentiate itself with a limited R&D budget.

resistion
User Rank
CEO
re: 28-nm FDSOI is production ready, says ST
resistion   12/11/2012 3:39:01 PM
NO RATINGS
The general practice should be to avoid overlap..so it is either disconnect or deliberate.

Michael.Markowitz
User Rank
Rookie
re: 28-nm FDSOI is production ready, says ST
Michael.Markowitz   12/11/2012 3:16:37 PM
NO RATINGS
No mystery or politics. Peter's analysis--that the key folks are at IEDM--is correct, as usual. His follow-on question is also easy to answer: the results presented by ST were hot off the presses (and testers). ST wasn't in position to respond to the Call for Papers early this year, when the call went out. (Full Disclosure: I am ST's director of technical media relations)

Peter Clarke
User Rank
Blogger
re: 28-nm FDSOI is production ready, says ST
Peter Clarke   12/11/2012 2:41:51 PM
NO RATINGS
I would take it to be not a political statement but a practical move. Many of the key engineers and engineering managers that can shape the adoption of FDSOI would be present at IEDM. Of course you could ask why the four papers presented at the FDSOI meeting were'nt just offered up to IEDM for inclusion that meeting. That said, the four 30-minute papers presented yesterday evening did look interesting to judge by the titles. They included one on FD 14-nm for FPGAs from Jeff Watt of Altera

resistion
User Rank
CEO
re: 28-nm FDSOI is production ready, says ST
resistion   12/11/2012 1:43:10 PM
NO RATINGS
Why was this FD-SOI meeting scheduled during IEDM? Is this some kind of political statement?

Page 1 / 2   >   >>


EE Life
Frankenstein's Fix, Teardowns, Sideshows, Design Contests, Reader Content & More
Max Maxfield

Fist Bumps & the Zombie Apocalypse
Max Maxfield
36 comments
Are you concerned about the possibility of a Zombie Apocalypse or do you scoff at the thought of such an eventuality? If the latter, would you be surprised to hear that the US military has ...

Rishabh N. Mahajani, High School Senior and Future Engineer

Future Engineers: Don’t 'Trip Up' on Your College Road Trip
Rishabh N. Mahajani, High School Senior and Future Engineer
8 comments
A future engineer shares his impressions of a recent tour of top schools and offers advice on making the most of the time-honored tradition of the college road trip.

Larry Desjardin

Engineers Should Study Finance: 5 Reasons Why
Larry Desjardin
41 comments
I'm a big proponent of engineers learning financial basics. Why? Because engineers are making decisions all the time, in multiple ways. Having a good financial understanding guides these ...

Karen Field

July Cartoon Caption Contest: Let's Talk Some Trash
Karen Field
151 comments
Steve Jobs allegedly got his start by dumpster diving with the Computer Club at Homestead High in the early 1970s.

Top Comments of the Week
Flash Poll
Like Us on Facebook
EE Times on Twitter
EE Times Twitter Feed

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)