Breaking News
Comments
resistion
User Rank
Author
re: Toshiba claims MRAM can replace SRAM
resistion   12/11/2012 3:43:54 PM
NO RATINGS
No eventual disturb by subthreshold leakage? Not too sure about that.

WiLess
User Rank
Author
re: Toshiba claims MRAM can replace SRAM
WiLess   12/12/2012 1:26:05 AM
NO RATINGS
The power is not applied to MRAM cell when it is not accessed, therefore there is no subthreshold leakage. It can also be non-volatile because of that.

resistion
User Rank
Author
re: Toshiba claims MRAM can replace SRAM
resistion   12/12/2012 4:57:16 AM
NO RATINGS
But isn't there a transistor in series with the MRAM? That can pass subthreshold current.

krisi
User Rank
Author
re: Toshiba claims MRAM can replace SRAM
krisi   12/12/2012 3:57:31 PM
NO RATINGS
The physics of SST-MRAM is described in Nanoscale Semiconductor Memories: Technology and Applications by CRC Press

Victor.Shadan
User Rank
Author
re: Toshiba claims MRAM can replace SRAM
Victor.Shadan   12/13/2012 4:46:32 PM
NO RATINGS
What is the size of CACHE? Also how is this compare to Fero Electric Technology fro TI?

lwang61
User Rank
Author
re: Toshiba claims MRAM can replace SRAM
lwang61   12/19/2012 10:18:26 AM
NO RATINGS
What is the speed and current consumption for writing SST-MRAM? Write disturbance is a very serious issue for old MRAM. What is the write disturbance for present vertical SST-MRAM? Apreciate your comments.

resistion
User Rank
Author
re: Toshiba claims MRAM can replace SRAM
resistion   4/23/2013 9:40:09 AM
NO RATINGS
The read current is about a third of write current. The switching time depends on current, the lower current requires longer time. A long enough read could do it. But scaled down resistance goes up, slowing down read anyway.



Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Radio
LATEST ARCHIVED BROADCAST

What are the engineering and design challenges in creating successful IoT devices? These devices are usually small, resource-constrained electronics designed to sense, collect, send, and/or interpret data. Some of the devices need to be smart enough to act upon data in real time, 24/7. Specifically the guests will discuss sensors, security, and lessons from IoT deployments.

Brought to you by:

Most Recent Comments
Like Us on Facebook
Special Video Section
Once the base layer of a design has been taped out, making ...
In this short video we show an LED light demo to ...
The LTC2380-24 is a versatile 24-bit SAR ADC that combines ...
In this short video we show an LED light demo to ...
02:46
Wireless Power enables applications where it is difficult ...
07:41
LEDs are being used in current luxury model automotive ...
With design sizes expected to increase by 5X through 2020, ...
01:48
Linear Technology’s LT8330 and LT8331, two Low Quiescent ...
The quality and reliability of Mill-Max's two-piece ...
LED lighting is an important feature in today’s and future ...
05:27
The LT8602 has two high voltage buck regulators with an ...
05:18
Silego Technology’s highly versatile Mixed-signal GreenPAK ...
The quality and reliability of Mill-Max's two-piece ...
01:34
Why the multicopter? It has every thing in it. 58 of ...
Security is important in all parts of the IoT chain, ...
Infineon explains their philosophy and why the multicopter ...
The LTC4282 Hot SwapTM controller allows a board to be ...
This video highlights the Zynq® UltraScale+™ MPSoC, and sho...
Homeowners may soon be able to store the energy generated ...
The LTC®6363 is a low power, low noise, fully differential ...