Breaking News
Comments
Newest First | Oldest First | Threaded View
HS_SemiPro
User Rank
Author
re: Intel's FinFETs approach draws fire from rivals
HS_SemiPro   12/14/2012 6:50:09 AM
NO RATINGS
IBM will likely go to FinFet at 14nm. But IBM doesn't need to compete in Consumer Electronics market, their technology is optimized for Enterprise High Performance Servers, SO they can afford SOI

HS_SemiPro
User Rank
Author
re: Intel's FinFETs approach draws fire from rivals
HS_SemiPro   12/14/2012 6:46:57 AM
NO RATINGS
Was there any paper from TSMC at IEDM talking about their Roadmap or showing that they have made progress with FinFet?

the_floating_ gate
User Rank
Author
re: Intel's FinFETs approach draws fire from rivals
the_floating_ gate   12/14/2012 4:00:18 AM
NO RATINGS
Are you backing FinFETs? FD-SOI? Gemanium? Tunnel FETs? and why? Why is AMD abandon SOI after using it for years? AMD will therefore move on from SOI based processes next year. Kaveri that will replace Trinity will be made with 28 nanometer technology, which CTO (Chief Technology Office) Mark Papermaster confirms will be Bulk-based. The same year the cheap and energy efficient platforms Kabini and Temash will arrive, which will build on a similar 28 nanometer technology. There were not details on who will supply the process, but most likely Kaveri will be made by GlobalFoundries, while TSMC will produce Temash and Kabini.

giriscitek
User Rank
Author
re: Intel's FinFETs approach draws fire from rivals
giriscitek   12/14/2012 3:32:42 AM
NO RATINGS
I want to go with FD-SOI because when the substrate is fully depleted meaning no doping(theoretically) and hence the substrate will have very high resistance. This means that the drain and source of MOS transistors can be very close as ST-Micro suggested less than 10nm (8 , 5 , ..) and still gate will have good control over the drain current which is crucial for MOS transitors to work properly. FD-SOI will not be completely new step like Intel's 3D stacked MOS transistor architecture. Hence FD-SOI will be more cost effective in terms of material cost of MOS transistor manufacture. Digital MOS : FD-SOI , 3D or carbon wires will be good. Analog MOS : ????? (for less than 10nm) Carbon wires will be a boon for digital chips of the future with more than 10 billion switches on chip. may be good for memory as well like processor caches and SRAM kind.

the_floating_ gate
User Rank
Author
re: Intel's FinFETs approach draws fire from rivals
the_floating_ gate   12/14/2012 2:08:31 AM
NO RATINGS
could NOT be manufactured

the_floating_ gate
User Rank
Author
re: Intel's FinFETs approach draws fire from rivals
the_floating_ gate   12/14/2012 2:07:31 AM
NO RATINGS
IBM's left hand does not seem to know what the right hand is doing - the foundry manufacturing landscape appears in complete disarry - poor UMC "sucker" - no wait UMC figured out long before IBM that SiLK though it looked great on paper could be manufactured... UMC licenses IBM technology for 20-nm FinFETs www.eetimes.com › News and Analysis Jun 29, 2012 – (UMC) has licensed technology from IBM Corp. to expedite the development of its 20-nm CMOS process, including FinFET 3-D transistors, the ...

song-chou-1
User Rank
Author
re: Intel's FinFETs approach draws fire from rivals
song-chou-1   12/13/2012 9:58:42 PM
NO RATINGS
Rick 3 big customers have committed to making foundry planar 20nm next volume node versus pick 20nm finFET (called "14 or 16nm") Rest still deciding. There is no meaningful data anywhere on foundry Finfet so perhaps they have the same problem as Intel.

rick merritt
User Rank
Author
re: Intel's FinFETs approach draws fire from rivals
rick merritt   12/13/2012 7:52:19 PM
NO RATINGS
Are you backing FinFETs? FD-SOI? Gemanium? Tunnel FETs? and why?



Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Radio
NEXT UPCOMING BROADCAST

What are the engineering and design challenges in creating successful IoT devices? These devices are usually small, resource-constrained electronics designed to sense, collect, send, and/or interpret data. Some of the devices need to be smart enough to act upon data in real time, 24/7. Are the design challenges the same as with embedded systems, but with a little developer- and IT-skills added in? What do engineers need to know? Rick Merritt talks with two experts about the tools and best options for designing IoT devices in 2016. Specifically the guests will discuss sensors, security, and lessons from IoT deployments.
Like Us on Facebook
Special Video Section
Linear Technology’s LT8330 and LT8331, two Low Quiescent ...
The quality and reliability of Mill-Max's two-piece ...
01:34
The quality and reliability of Mill-Max's two-piece ...
LED lighting is an important feature in today’s and future ...
05:27
The LT8602 has two high voltage buck regulators with an ...
05:18
Silego Technology’s highly versatile Mixed-signal GreenPAK ...
The quality and reliability of Mill-Max's two-piece ...
01:34
Why the multicopter? It has every thing in it. 58 of ...
Security is important in all parts of the IoT chain, ...
Infineon explains their philosophy and why the multicopter ...
The LTC4282 Hot SwapTM controller allows a board to be ...
This video highlights the Zynq® UltraScale+™ MPSoC, and sho...
Homeowners may soon be able to store the energy generated ...
The LTC®6363 is a low power, low noise, fully differential ...
See the Virtex® UltraScale+™ FPGA with 32.75G backplane ...
Vincent Ching, applications engineer at Avago Technologies, ...
The LT®6375 is a unity-gain difference amplifier which ...
The LTC®4015 is a complete synchronous buck controller/ ...
10:35
The LTC®2983 measures a wide variety of temperature sensors ...
The LTC®3886 is a dual PolyPhase DC/DC synchronous ...