Breaking News
Comments
Newest First | Oldest First | Threaded View
resistion
User Rank
Author
re: Ireland still set for FinFETs, says Intel exec
resistion   4/18/2013 6:26:44 AM
NO RATINGS
So did the workers complete their 14 nm training?

Peter Clarke
User Rank
Author
re: Ireland still set for FinFETs, says Intel exec
Peter Clarke   12/17/2012 11:38:11 AM
NO RATINGS
@song-chou-1 I can only report what the executives say. You say no Intel 14-nm parts will ship in 2013 but the end of the 2013 is 12 months away. We will have to wait and see. And is it a case of Intel can't make 14-nm chips or is choosing to slow down the process introduction because of market issues it sees around uncertainty for its favored computer form factors?

song-chou-1
User Rank
Author
re: Ireland still set for FinFETs, says Intel exec
song-chou-1   12/16/2012 10:30:45 PM
NO RATINGS
Mr. Peter, Pulling the engineers home and claiming no 14nm slip is like the other Intel manager saying "foundry is dead" while Intel is trying to get into foundry business Many source and data points suggest Intel 14nm is 6 months to 1 year late. No parts will ship in 2013 (original plan on paper)

Peter Clarke
User Rank
Author
re: Ireland still set for FinFETs, says Intel exec
Peter Clarke   12/14/2012 6:18:33 PM
NO RATINGS
@chipmonk You may have put your finger on it. And the issue remains that the longer Leixlip is only running a 65-nm process and does not get P1272 the more chance senior Intel management has to change their mind. That said Intel Ireland has won a number of manufacturing excellence awards within Intel and did management to beat out Intel Israel for the chance to run P1272. So probably Leixlip deserves its "chance to shine."

chipmonk0
User Rank
Author
re: Ireland still set for FinFETs, says Intel exec
chipmonk0   12/14/2012 4:20:34 PM
NO RATINGS
There seems to be a shift at Intel from CPUs for PCs to SoCs for Mobiles. 14 nm process may have to be reoptimized for SoCs ( analog, I/O,.. ). This might take some time. Perhaps not much point in keeping 600 Irish stuck in the Desert ( AZ ) during the Holidays while all this goes on.

Peter Clarke
User Rank
Author
re: Ireland still set for FinFETs, says Intel exec
Peter Clarke   12/14/2012 2:41:53 PM
NO RATINGS
@resistion Not sure about that. The workers there know that work is pressing on to finish the re-commissioning of Fab 14, which will probably just be labeled as part of Fab 24. But what they don't know so well is how an incoming CEO at Intel will regard Intel Ireland. One way that what Eamonn Sinnott said makes sense is if there is NO timetable for when Leixlip starts running the 14-nm FinFET process. It is just there to follow on when the two U.S. foundries are maxxed out. In which case, sending a significant part of a work force in training home before the training is complete cannot be related to a delay as without a timetable you cannot have a delay. And even if Intel started to have second thoughts about ramping 14-nm at Leixlip they would not stop the fab shell commissioning work. Having started they more or less have to finish the work even if they choose to delay putting equipment in.

resistion
User Rank
Author
re: Ireland still set for FinFETs, says Intel exec
resistion   12/14/2012 2:14:47 PM
NO RATINGS
The workers are breathing a sigh of relief, probably.



Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Radio
NEXT UPCOMING BROADCAST

What are the engineering and design challenges in creating successful IoT devices? These devices are usually small, resource-constrained electronics designed to sense, collect, send, and/or interpret data. Some of the devices need to be smart enough to act upon data in real time, 24/7. Are the design challenges the same as with embedded systems, but with a little developer- and IT-skills added in? What do engineers need to know? Rick Merritt talks with two experts about the tools and best options for designing IoT devices in 2016. Specifically the guests will discuss sensors, security, and lessons from IoT deployments.
Like Us on Facebook
Special Video Section
LED lighting is an important feature in today’s and future ...
05:27
The LT8602 has two high voltage buck regulators with an ...
05:18
The quality and reliability of Mill-Max's two-piece ...
01:34
Why the multicopter? It has every thing in it. 58 of ...
Security is important in all parts of the IoT chain, ...
Infineon explains their philosophy and why the multicopter ...
The LTC4282 Hot SwapTM controller allows a board to be ...
This video highlights the Zynq® UltraScale+™ MPSoC, and sho...
Homeowners may soon be able to store the energy generated ...
The LTC®6363 is a low power, low noise, fully differential ...
See the Virtex® UltraScale+™ FPGA with 32.75G backplane ...
Vincent Ching, applications engineer at Avago Technologies, ...
The LT®6375 is a unity-gain difference amplifier which ...
The LTC®4015 is a complete synchronous buck controller/ ...
10:35
The LTC®2983 measures a wide variety of temperature sensors ...
The LTC®3886 is a dual PolyPhase DC/DC synchronous ...
The LTC®2348-18 is an 18-bit, low noise 8-channel ...
The LT®3042 is a high performance low dropout linear ...