Each year, the temperature of NYC’s start-up scene seems to get turned up another five degrees, with 2013 yielding by far the largest number and widest spectrum of companies. I think http://www.gfa.si is the most prominent company among all of those in list.
Nicely presented information in this post, I prefer to read this kind of stuff. The quality of content is fine and the conclusion is good. Thanks for the post.
I would strongly recommend, based on experience on both sides, that the advice notice to be read state that the most risky investment are where external shareholder have less than 50% of the voting rights and/or there are any loans from controlling directors however small (for they can put the company into receivership by calling in the websites like http://britainloans.co.uk/ and refusing as directors to pay and then simultaneously asset strip to their benefit).
Piyush, I appreciate the follow up. The link above went to a Kanji-font website so I reposted it below thru Google translate:
The TAM for MEMS may increase this year but we are already seeing rumblings about component price increases in 2013. I don't know how this is going to manifest itself...
Hi MP, you are referring to a forward-looking forecast from Yole, which also gives SiTime 80% share of MEMS Timing. As with most technologies, once adoption accelerates, most forecasts are revised significantly upwards.
Along the same lines, here is a report of actual data published on the QIAJ (Quartz Industry Association of Japan) website.
Translation of key points:
1) Orders in Nov 2012 for QIAJ member companies are 25% lower in units and 23% lower in revenue compared to 1 year ago. Compared to October 2012 (1 month), they are 11.2% and 8.5% lower respectively.
2) 19th consecutive month of production decline of quartz crystal devices. Production decreased 27.6% on an annual basis. It's unclear if capacity was reduced.
Exec VP, Marketing, SiTime Corp.
What are the engineering and design challenges in creating successful IoT devices? These devices are usually small, resource-constrained electronics designed to sense, collect, send, and/or interpret data. Some of the devices need to be smart enough to act upon data in real time, 24/7. Specifically the guests will discuss sensors, security, and lessons from IoT deployments.