Embedded Systems Conference
Breaking News
Comments
krisi
User Rank
Author
re: DesignCon SMEs: Tough Path to 25G+ High-Speed Signals
krisi   1/11/2013 5:21:09 PM
NO RATINGS
What kind of clock recovery architecture is used at 25 Gb/s?

rick merritt
User Rank
Author
re: DesignCon SMEs: Tough Path to 25G+ High-Speed Signals
rick merritt   1/11/2013 5:22:59 PM
NO RATINGS
What bugaboos are you wrestling with at 25G?

docdivakar
User Rank
Author
re: DesignCon SMEs: Tough Path to 25G+ High-Speed Signals
docdivakar   1/21/2013 6:46:43 PM
NO RATINGS
Rick: the solution for handling losses caused by the woven glass PCB's is one part of the solution -I would imagine it ensures a more uniform dielectric field alleviating the need for more expensive dielectrics. The other that is mentioned hits home to me -package is going to be a big issue. In addition to routing challenges for the exploding number of connections, minimizing reflections at the package-to-board interface is indeed a problem at higher signaling rates. MP Divakar

EDWARDP.SAYRE
User Rank
Author
re: DesignCon SMEs: Tough Path to 25G+ High-Speed Signals
EDWARDP.SAYRE   1/11/2013 7:59:45 PM
NO RATINGS
NESA has worked on high speed serial problems for a long time (see EE Times, 8/17/1998). Some of the major problems for the IEEE 25/100 Gbps 802.3bj committee are the important design concepts to specify and how they relate to the IEEE 10/40 Gbps 802.3ae technology. From a physical designers point of view, a major problem is where and how to find and accumulate the technical application notes and form a coherent end to end reliable design. Few tools are appropriate for this level of design. A deep appreciation of advanced fundamentals as they relate to PCB materials, microwave and digital interconnect theory and design are required. Consultants such as myself and Scott McMorrow can fill the gap where there isn't a large and experienced SI staff. Sincerely, Ed Sayre, CTO North East Systems Associates, Inc. (NESA)

Yang Zhiwei
User Rank
Author
re: DesignCon SMEs: Tough Path to 25G+ High-Speed Signals
Yang Zhiwei   1/23/2013 3:53:26 AM
NO RATINGS
Anything else to say, expect it!



Radio
LATEST ARCHIVED BROADCAST
As data rates begin to move beyond 25 Gbps channels, new problems arise. Getting to 50 Gbps channels might not be possible with the traditional NRZ (2-level) signaling. PAM4 lets data rates double with only a small increase in channel bandwidth by sending two bits per symbol. But, it brings new measurement and analysis problems. Signal integrity sage Ransom Stephens will explain how PAM4 differs from NRZ and what to expect in design, measurement, and signal analysis.

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Like Us on Facebook
Special Video Section
The LTC®6363 is a low power, low noise, fully differential ...
Vincent Ching, applications engineer at Avago Technologies, ...
The LT®6375 is a unity-gain difference amplifier which ...
The LTC®4015 is a complete synchronous buck controller/ ...
10:35
The LTC®2983 measures a wide variety of temperature sensors ...
The LTC®3886 is a dual PolyPhase DC/DC synchronous ...
The LTC®2348-18 is an 18-bit, low noise 8-channel ...
The LT®3042 is a high performance low dropout linear ...
Chwan-Jye Foo (C.J Foo), product marketing manager for ...
The LT®3752/LT3752-1 are current mode PWM controllers ...
LED lighting is an important feature in today’s and future ...
Active balancing of series connected battery stacks exists ...
After a four-year absence, Infineon returns to Mobile World ...
A laptop’s 65-watt adapter can be made 6 times smaller and ...
An industry network should have device and data security at ...
The LTC2975 is a four-channel PMBus Power System Manager ...
In this video, a new high speed CMOS output comparator ...
The LT8640 is a 42V, 5A synchronous step-down regulator ...
The LTC2000 high-speed DAC has low noise and excellent ...
How do you protect the load and ensure output continues to ...