Breaking News
Comments
Newest First | Oldest First | Threaded View
<<   <   Page 2 / 2
Peter Clarke
User Rank
Author
re: Qualcomm joins IMEC core CMOS R&D program
Peter Clarke   1/29/2013 9:33:47 AM
NO RATINGS
It certainly was the case that most of the companies that are mentioned have researchers on secondment to Leuven, Belgium. This gives them the opportunity to run wafers on EUV machines...test structures and so on. A lot of effort goes into defining the scope of the intellectual property so that the companies know which bits are communal IP which all the participants get to share.

FraAmelia
User Rank
Author
re: Qualcomm joins IMEC core CMOS R&D program
FraAmelia   1/29/2013 9:28:55 AM
NO RATINGS
So resistor what is your opinion about this decision by Qualcomm? If IP generation at a research institute is a complication, what does Qualcomm expect from this collaboration? is it only a sort of elite club or you think that something good will come out from this joint research? I am based in EU so I am welcoming any initiative that will help Europe not to be relegated at the periphery in the semi world

resistion
User Rank
Author
re: Qualcomm joins IMEC core CMOS R&D program
resistion   1/29/2013 4:26:12 AM
NO RATINGS
A research institute is essentially a technology development insurance company. Companies of course want exclusive licenses, which does make IP generation at a research institute a complication.

eewiz
User Rank
Author
re: Qualcomm joins IMEC core CMOS R&D program
eewiz   1/29/2013 4:11:51 AM
NO RATINGS
I believe its mostly like jointly funding the research. IMEC will be hiring personnel and doing the research .. IP shared among investors..

DrQuine
User Rank
Author
re: Qualcomm joins IMEC core CMOS R&D program
DrQuine   1/28/2013 11:47:02 PM
NO RATINGS
Sounds like good news for the nanoelectronics research institute IMEC. What I'm curious about is how all these companies will be collaborating. Is the institute serving as facility where research can be done (like a machine shop renting out space for development) or are the participating companies jointly funding research. Sounds like an intellectual property challenge - especially with all the cross licensed patents already in play.

<<   <   Page 2 / 2


Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Radio
LATEST ARCHIVED BROADCAST

What are the engineering and design challenges in creating successful IoT devices? These devices are usually small, resource-constrained electronics designed to sense, collect, send, and/or interpret data. Some of the devices need to be smart enough to act upon data in real time, 24/7. Specifically the guests will discuss sensors, security, and lessons from IoT deployments.

Brought to you by:

Like Us on Facebook
Special Video Section
Wireless Power enables applications where it is difficult ...
07:41
LEDs are being used in current luxury model automotive ...
With design sizes expected to increase by 5X through 2020, ...
01:48
Linear Technology’s LT8330 and LT8331, two Low Quiescent ...
The quality and reliability of Mill-Max's two-piece ...
LED lighting is an important feature in today’s and future ...
05:27
The LT8602 has two high voltage buck regulators with an ...
05:18
Silego Technology’s highly versatile Mixed-signal GreenPAK ...
The quality and reliability of Mill-Max's two-piece ...
01:34
Why the multicopter? It has every thing in it. 58 of ...
Security is important in all parts of the IoT chain, ...
Infineon explains their philosophy and why the multicopter ...
The LTC4282 Hot SwapTM controller allows a board to be ...
This video highlights the Zynq® UltraScale+™ MPSoC, and sho...
Homeowners may soon be able to store the energy generated ...
The LTC®6363 is a low power, low noise, fully differential ...
See the Virtex® UltraScale+™ FPGA with 32.75G backplane ...
Vincent Ching, applications engineer at Avago Technologies, ...
The LT®6375 is a unity-gain difference amplifier which ...
The LTC®4015 is a complete synchronous buck controller/ ...
10:35