Breaking News
Comments
Newest First | Oldest First | Threaded View
Page 1 / 2   >   >>
resistion
User Rank
Author
re: ISSCC: ASML says EUV best option at 10nm
resistion   6/13/2013 5:24:54 AM
NO RATINGS
The 2D feature resolution is still not beating 22 nm and roughness about 15% of that. Photon shot noise is not negligible anymore.

resistion
User Rank
Author
re: ISSCC: ASML says EUV best option at 10nm
resistion   6/13/2013 5:02:45 AM
NO RATINGS
The SPIE material is publicly available: http://www.asml.com/doclib/investor/presentations/2013/asml_20130228_EUV_presentation_SPIE_public.pdf

resistion
User Rank
Author
re: ISSCC: ASML says EUV best option at 10nm
resistion   2/26/2013 2:10:53 AM
NO RATINGS
SPIE Keynote from Intel showed EUV out at 10 nm (still in pilot), with only 193 nm extension being used for production at 2H 2015.

double-o-nothing
User Rank
Author
re: ISSCC: ASML says EUV best option at 10nm
double-o-nothing   2/24/2013 1:24:48 AM
NO RATINGS
SPIE Advanced Lithography this week is where the updates on lithography happen.

resistion
User Rank
Author
re: ISSCC: ASML says EUV best option at 10nm
resistion   2/23/2013 10:26:30 PM
NO RATINGS
Why did they present this at ISSCC? The conference is about circuits and designs, not about devices and processes, don't even mention lithography!

Diogenes53
User Rank
Author
re: ISSCC: ASML says EUV best option at 10nm
Diogenes53   2/22/2013 1:53:04 AM
NO RATINGS
Bring on angstroms! The horse died when the name was changed from soft x-ray projection lithography to EUV. Who says words don't matter.

de_la_rosa
User Rank
Author
re: ISSCC: ASML says EUV best option at 10nm
de_la_rosa   2/21/2013 4:21:15 PM
NO RATINGS
I wonder if those resolution results are representative for high throughput conditions. They are flogging a dead horse!

pica0
User Rank
Author
re: ISSCC: ASML says EUV best option at 10nm
pica0   2/21/2013 2:05:32 PM
NO RATINGS
Any energy consumption estimations?

InVT
User Rank
Author
re: ISSCC: ASML says EUV best option at 10nm
InVT   2/20/2013 4:50:16 PM
NO RATINGS
I'm guessing if they develop a pellicle process they are going to have to bring it up well above 60W.

resistion
User Rank
Author
re: ISSCC: ASML says EUV best option at 10nm
resistion   2/20/2013 1:58:18 AM
NO RATINGS
Bi-directional M1 is commonly practiced but not necessary. In fact, given EUV's inherent X-Y asymmetry, unidirectional will always be lithographically preferred.

Page 1 / 2   >   >>


Radio
LATEST ARCHIVED BROADCAST

What are the engineering and design challenges in creating successful IoT devices? These devices are usually small, resource-constrained electronics designed to sense, collect, send, and/or interpret data. Some of the devices need to be smart enough to act upon data in real time, 24/7. Specifically the guests will discuss sensors, security, and lessons from IoT deployments.

Brought to you by:

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Like Us on Facebook
Special Video Section
With design sizes expected to increase by 5X through 2020, ...
01:48
Linear Technology’s LT8330 and LT8331, two Low Quiescent ...
The quality and reliability of Mill-Max's two-piece ...
LED lighting is an important feature in today’s and future ...
05:27
The LT8602 has two high voltage buck regulators with an ...
05:18
Silego Technology’s highly versatile Mixed-signal GreenPAK ...
The quality and reliability of Mill-Max's two-piece ...
01:34
Why the multicopter? It has every thing in it. 58 of ...
Security is important in all parts of the IoT chain, ...
Infineon explains their philosophy and why the multicopter ...
The LTC4282 Hot SwapTM controller allows a board to be ...
This video highlights the Zynq® UltraScale+™ MPSoC, and sho...
Homeowners may soon be able to store the energy generated ...
The LTC®6363 is a low power, low noise, fully differential ...
See the Virtex® UltraScale+™ FPGA with 32.75G backplane ...
Vincent Ching, applications engineer at Avago Technologies, ...
The LT®6375 is a unity-gain difference amplifier which ...
The LTC®4015 is a complete synchronous buck controller/ ...
10:35
The LTC®2983 measures a wide variety of temperature sensors ...
The LTC®3886 is a dual PolyPhase DC/DC synchronous ...