Breaking News
Comments
EREBUS0
User Rank
Author
re: RF board takes Arduino-like approach
EREBUS0   3/7/2013 8:49:28 PM
NO RATINGS
If they added a signal analyzer software bundle, I would be very interested. I can see a lot of uses for a device like this one. Just my opinion,

bobdvb
User Rank
Author
re: RF board takes Arduino-like approach
bobdvb   3/8/2013 10:11:11 AM
NO RATINGS
Take a look at the BladeRF from Nuand: www.kickstarter.com/projects/1085541682/bladerf-usb-30-software-defined-radio They have an open source radio platform which uses GNU Radio and provides analysis. I have been rather rash and ordered one already!

Peter Clarke
User Rank
Author
re: RF board takes Arduino-like approach
Peter Clarke   3/8/2013 1:06:44 PM
NO RATINGS
It is interesting to note that the BladeRF is based on the LMS6002D IC from Lime Microsystems because as Nuand states: "this transceiver is capable of handling anything from simple FM audio to the latest 4G LTE standard." BladeRF does include the FPGA and a USB 3.0 digital connection and bus power.

krisi
User Rank
Author
re: RF board takes Arduino-like approach
krisi   3/7/2013 8:51:10 PM
NO RATINGS
Maybe this would be useful to teach RF at schools?

yazhouren
User Rank
Author
re: RF board takes Arduino-like approach
yazhouren   3/8/2013 5:16:38 AM
NO RATINGS
hardware open source ?

JohnBeattie
User Rank
Author
re: RF board takes Arduino-like approach
JohnBeattie   3/8/2013 5:09:16 PM
NO RATINGS
"Myriad-RF boards use FPRF transceivers to support all the mobile broadband standards – LTE, HSPA+, CDMA, 2G..." Does this mean that the board can send and receive according, to, e.g. the CDMA PHY standard? Or does it mean that the board can send and receive at the relevant rf frequencies and actually imposing the digital signal on top of that is up to you?

VNP
User Rank
Author
re: RF board takes Arduino-like approach
VNP   3/9/2013 11:26:32 AM
NO RATINGS
There is not any baseband modem on the board but ADC and DAC (features of LMS6002D). As Peter said above BladeRF includes all stuff (FPGA + ARM9) to play with mentioned standards. I like it.

R Sweeney
User Rank
Author
re: RF board takes Arduino-like approach
R Sweeney   3/8/2013 9:35:55 PM
NO RATINGS
Definitely going to shake up the amateur radio world.

WKetel
User Rank
Author
re: RF board takes Arduino-like approach
WKetel   3/13/2013 12:56:06 AM
NO RATINGS
I don't think that this will "shake up" the amateur world, but it certainly looks like a very worthwhile contribution and it does appear to have a number of uses besides just communication. So I will be quite interested to see what all develops. If it can indeed be made to function as the core of a spectrum analyser then it would have immediate value to quite a few people, both hams and experimentors. BUT please don't compare them to Ardunio. Those ardunio projects always substitute a microcontroller board for a function that could be done with a simple comparator. A shameless promotion of a product line at the expense of understanding actual circuitry.



Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Radio
LATEST ARCHIVED BROADCAST

What are the engineering and design challenges in creating successful IoT devices? These devices are usually small, resource-constrained electronics designed to sense, collect, send, and/or interpret data. Some of the devices need to be smart enough to act upon data in real time, 24/7. Specifically the guests will discuss sensors, security, and lessons from IoT deployments.

Brought to you by:

Most Recent Comments
Like Us on Facebook
Special Video Section
The LTC2380-24 is a versatile 24-bit SAR ADC that combines ...
In this short video we show an LED light demo to ...
02:46
Wireless Power enables applications where it is difficult ...
07:41
LEDs are being used in current luxury model automotive ...
With design sizes expected to increase by 5X through 2020, ...
01:48
Linear Technology’s LT8330 and LT8331, two Low Quiescent ...
The quality and reliability of Mill-Max's two-piece ...
LED lighting is an important feature in today’s and future ...
05:27
The LT8602 has two high voltage buck regulators with an ...
05:18
Silego Technology’s highly versatile Mixed-signal GreenPAK ...
The quality and reliability of Mill-Max's two-piece ...
01:34
Why the multicopter? It has every thing in it. 58 of ...
Security is important in all parts of the IoT chain, ...
Infineon explains their philosophy and why the multicopter ...
The LTC4282 Hot SwapTM controller allows a board to be ...
This video highlights the Zynq® UltraScale+™ MPSoC, and sho...
Homeowners may soon be able to store the energy generated ...
The LTC®6363 is a low power, low noise, fully differential ...
See the Virtex® UltraScale+™ FPGA with 32.75G backplane ...
Vincent Ching, applications engineer at Avago Technologies, ...