Breaking News
Comments
Newest First | Oldest First | Threaded View
Page 1 / 6   >   >>
Max The Magnificent
User Rank
Author
Spagetti Trees
Max The Magnificent   7/31/2013 10:34:14 AM
NO RATINGS
Not engineering related -- but when I was a kid in England there was a TV program called "Blue Peter" for young viewers (it might still be running for all I know). I remember one April Fool's day episode where they did a "mockumentory" segment showing people in Italy harvesting the strands of spagetti dangling from the branches of the spagetti trees (LOL)

rick merritt
User Rank
Author
Can't wait for next April
rick merritt   7/31/2013 10:27:11 AM
NO RATINGS
Fun stuff!

Max The Magnificent
User Rank
Author
Re: Black out!
Max The Magnificent   7/29/2013 12:52:07 PM
NO RATINGS
@Susan: Back in the days, Norwegian TV told viewers they were testing new color broadcasts.  In order to see the colors all light bulbs in the house had to be turned off.  Needless to say, Oslo went dark.

Brilliant!!! I'm laughing to myself just thinking about it :-)


Susan Rambo
User Rank
Author
Re: Black out!
Susan Rambo   7/28/2013 5:54:08 PM
NO RATINGS
@betajet, that's a good trick and an amusing story. I guess they call that a "blare out" not a "black out." 

betajet
User Rank
Author
Re: Black out!
betajet   7/28/2013 4:53:17 PM
NO RATINGS
I once heard a similar story about Ernie Kovacs back in the Dumont Network days of early USA television.  The TV studio was at the top of a hill, near the transmitting tower, with a good view of the city.  As a prank, sometime when they transmitted a late-night movie, they would turn down the master volume at the studio -- just a little.  Everyone in TV land would then turn up their volume.  A few minutes later, the studio would turn down the master volume again, and everyone in TV land would increase their volume again.  After half an hour of this, the master volume would be way down and everyone of TV land would have their volume turned all the way up.


Then the studio would turn the master volume all the way up, and they'd run to the windows to watch lights turn on all over the city as thousands of unsuspecting victims suddenly had their TVs blaring and waking up their neighbors.

You'd lose your license trying something like that today, but things were unreliable enough back then that you could blame it on a technical malfunction and get away with it.  Actually, it's a pretty good way to measure the size of your audience :-)

Susan Rambo
User Rank
Author
Black out!
Susan Rambo   7/28/2013 1:30:42 AM
NO RATINGS
Back in the days, Norwegian TV told viewers they were testing new color broadcasts.  In order to see the colors all light bulbs in the house had to be turned off.  Needless to say, Oslo went dark.

mike32768
User Rank
Author
re: The best electronics-related April Fools' spoof ever?
mike32768   6/6/2013 3:59:59 PM
NO RATINGS
It was in the early-to-mid 80s, and I'm pretty sure it was in multiple editions, escaping the editors multiple times. The editor of the rfcafe.com site has asked for someone to send him a graphic... here's the link http://www.rfcafe.com/miscellany/cool-products/wj-g1-catalog-page.htm

WKetel
User Rank
Author
re: The best electronics-related April Fools' spoof ever?
WKetel   5/27/2013 10:23:42 PM
NO RATINGS
The machine wiring crew did pull a good one on me one April. After I had a machine started upm and fully debugged and I thought that I was ready for the customer to come in for an initial runoff trial, after lunch, some sections did not function quite right any more. And nobody was available to assist, they all seemed to be working on "other stuff" nearby. So I grabbed a multimeter and a set of prints and started the machine in the manual mode. In about five minutes I found a few connections to terminal blocks that had been insulated with heatshrink tubing over the bare copper conductor. I had it going in just a few more minutes, not in a very good mood. Then came the applause, it seems that I had proven my diagnostic skills. I probably should have been more amused.

old account Frank Eory
User Rank
Author
re: The best electronics-related April Fools' spoof ever?
old account Frank Eory   5/24/2013 9:10:46 PM
NO RATINGS
I remember that WJ catalog with "vs. phase of the moon"! I think it was around '86 or '87. And yes, you could tell that the engineers definitely snuck that one past the tech pubs people, because it was the only example of humor in the entire catalog.

Stargzer
User Rank
Author
re: The best electronics-related April Fools' spoof ever?
Stargzer   5/24/2013 8:20:31 PM
NO RATINGS
Waaaaaayyyyyy back when, Popular Electronics had a photo in a blurb announcing a new power transistor in a VERY LARGE TO-3 style case that dwarfed a Crescent (TM) wrench. They fessed up in the same issue; it was a miniature wrench about the size of a charm for a charm bracelet. Would have been nice to have one of those babies in real life back in the CB Radio days ... As to WOM, while reviewing a proposal many years ago, I seem to recall from the tech manual submitted in that procurement that the DEC PDP computer proposed had Write-Only Memory: it was a series of output ports mapped to memory locations. You could write to it to sent data to a peripheral, but nothing came back. (I don't recall, but they probably had ROM for input, also)

Page 1 / 6   >   >>


Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Radio
NEXT UPCOMING BROADCAST

What are the engineering and design challenges in creating successful IoT devices? These devices are usually small, resource-constrained electronics designed to sense, collect, send, and/or interpret data. Some of the devices need to be smart enough to act upon data in real time, 24/7. Are the design challenges the same as with embedded systems, but with a little developer- and IT-skills added in? What do engineers need to know? Rick Merritt talks with two experts about the tools and best options for designing IoT devices in 2016. Specifically the guests will discuss sensors, security, and lessons from IoT deployments.
Like Us on Facebook
Special Video Section
LED lighting is an important feature in today’s and future ...
05:27
The LT8602 has two high voltage buck regulators with an ...
05:18
The quality and reliability of Mill-Max's two-piece ...
01:34
Why the multicopter? It has every thing in it. 58 of ...
Security is important in all parts of the IoT chain, ...
Infineon explains their philosophy and why the multicopter ...
The LTC4282 Hot SwapTM controller allows a board to be ...
This video highlights the Zynq® UltraScale+™ MPSoC, and sho...
Homeowners may soon be able to store the energy generated ...
The LTC®6363 is a low power, low noise, fully differential ...
See the Virtex® UltraScale+™ FPGA with 32.75G backplane ...
Vincent Ching, applications engineer at Avago Technologies, ...
The LT®6375 is a unity-gain difference amplifier which ...
The LTC®4015 is a complete synchronous buck controller/ ...
10:35
The LTC®2983 measures a wide variety of temperature sensors ...
The LTC®3886 is a dual PolyPhase DC/DC synchronous ...
The LTC®2348-18 is an 18-bit, low noise 8-channel ...
The LT®3042 is a high performance low dropout linear ...
Chwan-Jye Foo (C.J Foo), product marketing manager for ...