Embedded Systems Conference
Breaking News
Comments
chanj0
User Rank
Author
re: Smart-city technology harvests energy from footsteps
chanj0   4/23/2013 7:11:02 AM
NO RATINGS
Great idea! Questions are whether 5mm is noticeable to people who walk on it. Will it cause any imbalance to some people? If it does, it might become a liability. Nonetheless, the idea is definitely worth exploring. Who knows, maybe after a couple generation, if not this first generation, will become part of the power source of our daily lives.

dnh
User Rank
Author
re: Smart-city technology harvests energy from footsteps
dnh   4/24/2013 12:47:06 AM
NO RATINGS
I would like to see numbers for the energy that can be harvested, and the capital costs needed. The article is muddled: " 8 watts of kinetic energy can be converted over the duration of each footstep" Watt is a unit of power, not energy. I did a similar calculation myself recently. I work out on a stationary bike that shows the power that I expend. I typically work out for 15 minutes at 100W power. The energy expended is 0.1KW * 0.25 Hours = 0.025 KWH, which is worth about $0.0025 at the current retail price for electricity, assuming 100% of the energy could be converted to electricity. That is very little value. And it is a fairly intence work out - much more intense than walking. And that raises the question that was previously asked - what will be the effect on the walker? My guess is that if more than a couple of watts or so of energy is harvested from a single walker, people will start to complain or will find a less tiring route to walk.

eewiz
User Rank
Author
re: Smart-city technology harvests energy from footsteps
eewiz   4/28/2013 10:56:58 AM
NO RATINGS
spot on.. they convert human energy to electrical energy. to walk on this floor one need to consume more energy as food than what he is used to now. again, after 1 hour of moderate workout at the gym, i spend like ~400 calories , which converts to just 0.000464888889 kilowatt hours. assuming a 20% conversion efficiency for piezo crystals, the numbers will be abysmal. also this is not the first time this is being tried.. they tried this in tokyo/israel http://www.greenoptimistic.com/2009/10/06/israel-piezoelectric-highway/#.UX0APrX-HOE http://inhabitat.com/tokyo-subway-stations-get-piezoelectric-floors/



Radio
LATEST ARCHIVED BROADCAST
As data rates begin to move beyond 25 Gbps channels, new problems arise. Getting to 50 Gbps channels might not be possible with the traditional NRZ (2-level) signaling. PAM4 lets data rates double with only a small increase in channel bandwidth by sending two bits per symbol. But, it brings new measurement and analysis problems. Signal integrity sage Ransom Stephens will explain how PAM4 differs from NRZ and what to expect in design, measurement, and signal analysis.

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Like Us on Facebook
Special Video Section
The LTC®6363 is a low power, low noise, fully differential ...
Vincent Ching, applications engineer at Avago Technologies, ...
The LT®6375 is a unity-gain difference amplifier which ...
The LTC®4015 is a complete synchronous buck controller/ ...
10:35
The LTC®2983 measures a wide variety of temperature sensors ...
The LTC®3886 is a dual PolyPhase DC/DC synchronous ...
The LTC®2348-18 is an 18-bit, low noise 8-channel ...
The LT®3042 is a high performance low dropout linear ...
Chwan-Jye Foo (C.J Foo), product marketing manager for ...
The LT®3752/LT3752-1 are current mode PWM controllers ...
LED lighting is an important feature in today’s and future ...
Active balancing of series connected battery stacks exists ...
After a four-year absence, Infineon returns to Mobile World ...
A laptop’s 65-watt adapter can be made 6 times smaller and ...
An industry network should have device and data security at ...
The LTC2975 is a four-channel PMBus Power System Manager ...
In this video, a new high speed CMOS output comparator ...
The LT8640 is a 42V, 5A synchronous step-down regulator ...
The LTC2000 high-speed DAC has low noise and excellent ...
How do you protect the load and ensure output continues to ...