This point hits home when, in the SADP flow, the "spacer dep", "spacer etch" and "mandrel etch" were tagged as separate cost items in the cost stacks. If we applied this to 3D NAND specific process, we would have cost stacks 16 or 32 x higher!
The processing of 8 or more cycles of device layers cannot be considered the same cost as a single cycle. There is multiplied material consumption as well as processing time. So this 3D cost-effectiveness thinking is self-deceit.
It is an amazing achievement by itself when you look at the SEM picture of a 64 bits wordline and triple level per cell. I think we have a tendency to overlook and take for granted this kind of technology marvel.
Next step will be 3D with charge trapping cell where the channel is made out of poly. That will give a huge boost to the NAND density with a relaxed design rules
It's a game of chicken among the four manufacturers. Who will go quadruple patterning with floating gate, and who will go 3D with charge-trapping. TLC is just to delay this fairly terrifying choice. It's a good topic for a betting pool.
Memory products have low margin of profit so using EUV is not the first option. In the future, NAND memory will go vertical and have 3D structures. 3D structures will have a relaxed pitch and the vertical integration will help increase the memory density.
“MLC to TLC is not doubling…”
What matters for the storage is Mbit/ unit area.
One method is to use Triple-Level- Cell and the other is to shrink the memory cell and have larger memory density. If error correction and stability can be guaranteed than TLC is a viable option for increasing the density. Of course the endurance is another topic.
What are the engineering and design challenges in creating successful IoT devices? These devices are usually small, resource-constrained electronics designed to sense, collect, send, and/or interpret data. Some of the devices need to be smart enough to act upon data in real time, 24/7. Are the design challenges the same as with embedded systems, but with a little developer- and IT-skills added in? What do engineers need to know? Rick Merritt talks with two experts about the tools and best options for designing IoT devices in 2016. Specifically the guests will discuss sensors, security, and lessons from IoT deployments.