Breaking News
Comments
Newest First | Oldest First | Threaded View
AKH0
User Rank
Freelancer
re: FDSOI gains three design wins
AKH0   5/28/2013 6:07:52 PM
NO RATINGS
The relatively lower drive current of 28FD has nothing to do with thin Si channel. It's the lack of strain elements that hurts the device. Strain elements are part of 14FD and impressive HW data is already shown (at VLSI and IEDM last year), with AC performance surpassing 22nm FinFET. There is no barrier in adding such elements in a 28nm FDSOI technology, the same way there are 3 versions of 28nm bulk technology.

aotearoan
User Rank
Manager
re: FDSOI gains three design wins
aotearoan   5/22/2013 3:27:23 PM
NO RATINGS
ST (not TS) seems to be betting the digital part of the house on FDSOI. For BigD, paricularly low power, it may actually work, as long as you don't need exotic analog IP - FDSOI gets kinky with analog.

kjdsfkjdshfkdshfvc
User Rank
Rookie
re: FDSOI gains three design wins
kjdsfkjdshfkdshfvc   5/20/2013 3:04:42 PM
NO RATINGS
What was the outcome? http://bit.ly/IC4m9t

Chipguy1
User Rank
CEO
re: FDSOI gains three design wins
Chipguy1   5/20/2013 12:04:40 PM
NO RATINGS
Yes the thin silicon in FDSOI results in very very low transistor current compared to bulk transistors. The ST 28nm FDSOI current is about 50% lower compared to 28HPM. That is a fundamental issue for circuit blocks

michigan0
User Rank
Manager
re: FDSOI gains three design wins
michigan0   5/20/2013 3:59:19 AM
NO RATINGS
IBM invented PDSOI, FDSOI, ET(extremely thin) SOI technologies. The PDSOI was very successful, but FDSOI including UTBB and ETSOI are not in manufacturing at any technology node today. This is because one of the critical issues with FDSOI is its scalerability. For the 28nm FDSOI a very thin SOI thickness or transistor channel thickness of 7nm is required to suppress its transistor leakage current, while for the 28nm planer bulk the transistor channel thickness is controlled by a combination of halo and retrograded implants, providing a fully depleted and significantly deeper than 7nm. That is why the planer bulk 28nm has been in high volume manufacturing by Intel, and major foundries for over two years. ST claimed last year that its 28nm FDSOI was ready for manufacturing, but is not yet. ST's 28nm FDSOI seems to be too late to inter the 28nm node market unless its 28nm FDSOI is superier to the planer bulk 28nm. Intel's 22nm FinFETs are in high Volume manufacturing over a year. But Chery dosn't say when ST will manufacture the 22nm FDSOI even though he has claimed on FDSOI having advantage over bulk CMOS or FinFET process. For the 22nm FDSOI the SOI thickness even thinner 4.5nm is required to suppress the transistor leakage current. Comparatively, for the 22nnm FinFET the Fin widh of 22nm that is equivalent to the FDSOI thicknesses of 4.5nm is required. What a big difference! That is why Intel's 22nm FinFETs are in high volume manufacturing over a year, but not 22nm FDSOI, and having difficulties in manufacturing even 28nm FDSOI. Skim

HS_SemiPro
User Rank
CEO
re: FDSOI gains three design wins
HS_SemiPro   5/18/2013 4:55:16 AM
NO RATINGS
For years Taiwan semi has stayed a step behind learning from mistakes of others, taking the lead entails some risk, which is showing up in their effort to catch up and surpass intel and others

microchip1
User Rank
Rookie
re: FDSOI gains three design wins
microchip1   5/17/2013 8:02:54 PM
NO RATINGS
The reason SOI is looking more attractive is the lack of value for Taiwan Semi 16. From 20 to 16 die size does not shrink (even slightly bigger for many blocks) I just don't see who is going to pay more for a wafer if die size does not shrink. By definition...there is no Moore's Law from 20 to 16. I don't get Taiwan semi's road map anymore



Flash Poll
EE Life
Frankenstein's Fix, Teardowns, Sideshows, Design Contests, Reader Content & More
Max Maxfield

MSGEQ7-Based DIY Audio Spectrum Analyzer: Testing
Max Maxfield
12 comments
In my previous column on this topic, we discussed the step-by-step construction of the first pass at a MSGEQ7-based DIY audio spectrum analyzer for use in my BADASS Display project. Of ...

Karen Field

June 2014 Cartoon Caption Winner
Karen Field
13 comments
Congratulations to "Wnderer" for submitting the winning caption for our June cartoon, after much heated conversation by our judges, given the plethora of great entries.

Jeremy Cook

Inspection Rejection: Why More Is Less in a Vision System
Jeremy Cook
3 comments
Albert Einstein has been quoted as saying, "Everything should be as simple as possible, but not simpler." I would never claim to have his level of insight -- or such an awesome head of ...

Jeremy Cook

Machine Fixes That Made Me Go 'DUH!'
Jeremy Cook
21 comments
As you can see in my bio at the end of this article, I work as a manufacturing engineer. One of my favorite things that happens on a Friday late in the afternoon is to hear my phone ring ...

Top Comments of the Week
Like Us on Facebook
EE Times on Twitter
EE Times Twitter Feed

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)