Embedded Systems Conference
Breaking News
Comments
Newest First | Oldest First | Threaded View
jjphillips
User Rank
Author
re: Leverage USB 3.0 for machine vision
jjphillips   7/12/2013 9:12:16 PM
NO RATINGS
@olaf.barheine - what type of medical device?  Pleora's NTx-U3 is being designed in to a number of x-ray detector panels, for example.

jjphillips
User Rank
Author
re: Leverage USB 3.0 for machine vision
jjphillips   7/12/2013 9:09:42 PM
NO RATINGS
@paspl - if you need high bandwidth, Pleora's NTx-U3 can achieve 3Gbps with the FX3.

Karnik
User Rank
Author
re: Leverage USB 3.0 for machine vision
Karnik   6/26/2013 12:27:45 AM
NO RATINGS
For FX3 in particular: a) Regardless of GPIF II configuration, SPI can be used for booting. b) In absence of hardware SPI, other peripherals (I2C, I2S, or UART) can be used, depending on the use case.

paspl
User Rank
Author
re: Leverage USB 3.0 for machine vision
paspl   6/25/2013 2:59:46 PM
NO RATINGS
The Figure 3 shows a Machine Vision design. But to achieve the maximum bandwidth on the FX3, the GPIF must be configured in 32-bit. In this case the spi controller seems not available (need to develop a manual spi (with poor performance)

Karnik
User Rank
Author
re: Leverage USB 3.0 for machine vision
Karnik   6/24/2013 6:50:56 PM
NO RATINGS
USB3.0 is capable of supplying more power as compared to USB2.0. It depends on the design how much current it needs to draw. USB3.0 controller by itself takes very less power and at the same time can go into very low power states to conserve power when not in use. USB3.0 has two additional low power states (on top of those in USB2.0) that save power even when the design is actively transferring data. So, overall an optimized low power application is possible with the right USB3.0 controller.

przemek0
User Rank
Author
re: Leverage USB 3.0 for machine vision
przemek0   6/18/2013 7:57:04 PM
NO RATINGS
That's interesting---what do you mean by 'USB 3.0 takes FAR too much current'? the host is capable of supplying 1.5A but the endpoint can use less, and it should be able to connect in low-speed mode and take as little current as it needs---isn't that the case?

Olaf.Barheine
User Rank
Author
re: Leverage USB 3.0 for machine vision
Olaf.Barheine   6/18/2013 3:58:06 PM
NO RATINGS
So what alternative would you suggest instead? In fact, I am just looking for a solution for a medical device that will send much data to a PC.

Youself
User Rank
Author
re: Leverage USB 3.0 for machine vision
Youself   6/14/2013 2:26:18 AM
NO RATINGS
forget it... USB 3.0 takes FAR too much current. Non starter for anything with a battery in it.

David_shi2013
User Rank
Author
re: Leverage USB 3.0 for machine vision
David_shi2013   6/14/2013 1:36:43 AM
NO RATINGS
Great article, new USB of the version will bring more covenient to IT customers.



Radio
NEXT UPCOMING BROADCAST

As we unveil EE Times’ 2015 Silicon 60 list, journalist & Silicon 60 researcher Peter Clarke hosts a conversation on startups in the electronics industry. Panelists Dan Armbrust (investment firm Silicon Catalyst), Andrew Kau (venture capital firm Walden International), and Stan Boland (successful serial entrepreneur, former CEO of Neul, Icera) join in the live debate.
Flash Poll
Top Comments of the Week
Like Us on Facebook

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Special Video Section
The LTC®4015 is a complete synchronous buck controller/ ...
10:35
The LT®3042 is a high performance low dropout linear ...
Chwan-Jye Foo (C.J Foo), product marketing manager for ...
The LT®3752/LT3752-1 are current mode PWM controllers ...
LED lighting is an important feature in today’s and future ...
Active balancing of series connected battery stacks exists ...
After a four-year absence, Infineon returns to Mobile World ...
A laptop’s 65-watt adapter can be made 6 times smaller and ...
An industry network should have device and data security at ...
The LTC2975 is a four-channel PMBus Power System Manager ...
In this video, a new high speed CMOS output comparator ...
The LT8640 is a 42V, 5A synchronous step-down regulator ...
The LTC2000 high-speed DAC has low noise and excellent ...
How do you protect the load and ensure output continues to ...
General-purpose DACs have applications in instrumentation, ...
Linear Technology demonstrates its latest measurement ...
10:29
Demos from Maxim Integrated at Electronica 2014 show ...
Bosch CEO Stefan Finkbeiner shows off latest combo and ...
STMicroelectronics demoed this simple gesture control ...
Keysight shows you what signals lurk in real-time at 510MHz ...