Breaking News
Comments
Newest First | Oldest First | Threaded View
resistion
User Rank
Author
re: IMEC helps scale NAND flash below 20-nm
resistion   6/24/2013 10:13:33 AM
NO RATINGS
I'd be interested either way the appearance of sub-19 or 3d nand.

FraAmelia
User Rank
Author
re: IMEC helps scale NAND flash below 20-nm
FraAmelia   6/24/2013 8:51:49 AM
NO RATINGS
I agree with NAND Rule. @20nm and below (I mean in BL and WL direction) It does not make any sense to speak about absolute reliability standard for the NAND (10 years, 3k or 50k or 100k cycles and at which T?). It depends on the use cases and the bib NAND users (A,SS) know it well...

resistion
User Rank
Author
re: IMEC helps scale NAND flash below 20-nm
resistion   6/23/2013 11:46:47 AM
NO RATINGS
I was a bit surprised no one announced sub-19 this year.

NAND rules
User Rank
Author
re: IMEC helps scale NAND flash below 20-nm
NAND rules   6/23/2013 8:55:29 AM
NO RATINGS
easy to scale below 2x node. doing 3 bits / cell at reliability spec is different. most of our development is now focused on 3D NAND vs scaling below 2x node.

resistion
User Rank
Author
re: IMEC helps scale NAND flash below 20-nm
resistion   6/21/2013 10:34:22 PM
NO RATINGS
A 25 nm thick dielectric is attractive electrically but not obviously below 20 nm.



Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Radio
NEXT UPCOMING BROADCAST

What are the engineering and design challenges in creating successful IoT devices? These devices are usually small, resource-constrained electronics designed to sense, collect, send, and/or interpret data. Some of the devices need to be smart enough to act upon data in real time, 24/7. Are the design challenges the same as with embedded systems, but with a little developer- and IT-skills added in? What do engineers need to know? Rick Merritt talks with two experts about the tools and best options for designing IoT devices in 2016. Specifically the guests will discuss sensors, security, and lessons from IoT deployments.
Most Recent Comments
dnadler017
 
realjjj
 
realjjj
 
jimfordbroadcom
 
jimfordbroadcom
 
resistion
 
jimfordbroadcom
 
jimfordbroadcom
 
realjjj
Like Us on Facebook
Special Video Section
LED lighting is an important feature in today’s and future ...
05:27
The LT8602 has two high voltage buck regulators with an ...
05:18
The quality and reliability of Mill-Max's two-piece ...
01:34
Why the multicopter? It has every thing in it. 58 of ...
Security is important in all parts of the IoT chain, ...
Infineon explains their philosophy and why the multicopter ...
The LTC4282 Hot SwapTM controller allows a board to be ...
This video highlights the Zynq® UltraScale+™ MPSoC, and sho...
Homeowners may soon be able to store the energy generated ...
The LTC®6363 is a low power, low noise, fully differential ...
See the Virtex® UltraScale+™ FPGA with 32.75G backplane ...
Vincent Ching, applications engineer at Avago Technologies, ...
The LT®6375 is a unity-gain difference amplifier which ...
The LTC®4015 is a complete synchronous buck controller/ ...
10:35
The LTC®2983 measures a wide variety of temperature sensors ...
The LTC®3886 is a dual PolyPhase DC/DC synchronous ...
The LTC®2348-18 is an 18-bit, low noise 8-channel ...
The LT®3042 is a high performance low dropout linear ...