Breaking News
Comments
Newest First | Oldest First | Threaded View
<<   <   Page 2 / 2
Garcia-Lasheras
User Rank
Author
Re: New world for hobbyists
Garcia-Lasheras   7/3/2013 6:56:09 AM
NO RATINGS
@Max: "I remember working on humongous wire-wrap prototypes ... if you messed up a connection it could take ages to track it down."

I remember that too... because I did it not so long ago!!

About three years ago, when I was working in the R&D department of an Electronic Manufacture Service provider, we used wire wrapping for building the first concept prototypes by attaching breadboards to standard development kits.

But even more interesting, the BOD --Bed Of Nails-- testers were completely customized using wire wrapping... and when systematic failure was detected, evaluating the hundreds of connections of the whole test board was a real headache!!

Max The Magnificent
User Rank
Author
Re: Why a wrap?
Max The Magnificent   7/2/2013 3:43:36 PM
NO RATINGS
@Betajet: I don't know why you're down on wire-wrap.  It was a great technology...

I was simply teasing it in an affectionate way -- I spent countless hours creating (and debugging) wire-wrap prototypes in the 1980s and I had a lot o ffun doing so :-)

betajet
User Rank
Author
Why a wrap?
betajet   7/2/2013 2:48:04 PM
NO RATINGS
Those SchmartBoards look pretty nice.  Now, if I can just find a compatible wire-wrap socket...

I don't know why you're down on wire-wrap.  It was a great technology, allowing easy changes to prototypes.  As long as you're careful, you can be quite accurate, though you should buzz out the board after wiring to make sure.  If you're making a big board, you need a computer-generated netlist and a fully-automated or semi-automated WW machine.

Max The Magnificent
User Rank
Author
Re: New world for hobbyists
Max The Magnificent   7/1/2013 1:57:31 PM
NO RATINGS
@LarryM99: ...prototyping used to be done with a soldering iron...

If you were lucky! (grin) Did you ever work with wire-wrap? I remember working on humongous wire-wrap prototypes ... if you messed up a connection it could take ages to track it down.

I agre ethat the sort of things you can do today with "cheap-and-cheerful" off-the-shelf kits is incredible -- it's an exciting time, and getting more exciting by the day :-)

LarryM99
User Rank
Author
New world for hobbyists
LarryM99   7/1/2013 1:12:15 PM
NO RATINGS
Max, prototyping used to be done with a soldering iron, but these days it is much more likely to be done with a C/C++ compiler. That is one of the remarkable things about Arduino and the current generation of microcontroller and sensor technology. It is certainly more exciting these days for those of us on the firmware / software side of the fence when we can buy components for pocket change that can be plugged together Lego-style and start hacking code for it almost immediately!

<<   <   Page 2 / 2


Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Radio
NEXT UPCOMING BROADCAST

What are the engineering and design challenges in creating successful IoT devices? These devices are usually small, resource-constrained electronics designed to sense, collect, send, and/or interpret data. Some of the devices need to be smart enough to act upon data in real time, 24/7. Are the design challenges the same as with embedded systems, but with a little developer- and IT-skills added in? What do engineers need to know? Rick Merritt talks with two experts about the tools and best options for designing IoT devices in 2016. Specifically the guests will discuss sensors, security, and lessons from IoT deployments.
Like Us on Facebook
Special Video Section
Linear Technology’s LT8330 and LT8331, two Low Quiescent ...
The quality and reliability of Mill-Max's two-piece ...
01:34
The quality and reliability of Mill-Max's two-piece ...
LED lighting is an important feature in today’s and future ...
05:27
The LT8602 has two high voltage buck regulators with an ...
05:18
Silego Technology’s highly versatile Mixed-signal GreenPAK ...
The quality and reliability of Mill-Max's two-piece ...
01:34
Why the multicopter? It has every thing in it. 58 of ...
Security is important in all parts of the IoT chain, ...
Infineon explains their philosophy and why the multicopter ...
The LTC4282 Hot SwapTM controller allows a board to be ...
This video highlights the Zynq® UltraScale+™ MPSoC, and sho...
Homeowners may soon be able to store the energy generated ...
The LTC®6363 is a low power, low noise, fully differential ...
See the Virtex® UltraScale+™ FPGA with 32.75G backplane ...
Vincent Ching, applications engineer at Avago Technologies, ...
The LT®6375 is a unity-gain difference amplifier which ...
The LTC®4015 is a complete synchronous buck controller/ ...
10:35
The LTC®2983 measures a wide variety of temperature sensors ...
The LTC®3886 is a dual PolyPhase DC/DC synchronous ...