Design Con 2015
Breaking News
Comments
Newest First | Oldest First | Threaded View
resistion
User Rank
CEO
Optical maskless
resistion   7/28/2013 8:27:34 AM
NO RATINGS
An interesting achievement from down under shows new maskless alternative. 52 nm pitch and 9 nm width.

 

http://www.theregister.co.uk/2013/06/20/boffins_light_way_to_optical_computing_with_1tb_dvd_tech/

wilber_xbox
User Rank
Manager
Re: eBeam Lithography Market Entry
wilber_xbox   7/24/2013 12:44:12 PM
NO RATINGS
With EVU still a distant reality, other technologies are drawing industry attention. EUV has been delayed so many times that its inclusion at 10nm is still not sure. Post 10nm, the problems for which EUV was envisioned will remain the same. We will need to look for reducing the wavelength to increase NA. I wonder why industry is still betting for EVU and not putting some money and faith to other technologies.

resistion
User Rank
CEO
Re: eBeam Lithography Market Entry
resistion   7/24/2013 11:06:32 AM
NO RATINGS
I agree the opportunity for a non-EUV lithography is opening up wider. EUV like immersion has issues with increasing NA. E-beam seems to be the dominant alternative. At the same time, there is a common sentiment that putting too many electrons through a small area (especially directly into an insulated device) cannot have good clean consequences. But that is exactly what is needed for overcoming shot noise, more electrons per sq. nm. But this need might not be necessary for ArF immersion masks which cannot shrink 4x feature sizes below ~160 nm anyway. So I think this plan still works out well for mask writing.

HXR
User Rank
Rookie
eBeam Lithography Market Entry
HXR   7/23/2013 1:59:01 PM
ASML rcently indicated it is seeking an additional 1.7B in funding to prepare for EUV and 450mm HVM in 2018.  This delay is an opportunity for eBeam lithography to provide complementary 1D line cut support of multi-patterned 193i lithography required to sustain HVM >10nm.  Enhanced eBeam performance drawing from Model Based Mask Data Prep (MB-MDP) can be implemented so that discrete structures and patterns can be addressed individually with specific shot tasking providing superior control of dose margin. Called Shot or Dose Modulation, this is a new technique of assigning optimized electron beam energy and current to specific devices or geometries.  This can enhance eBeam dose control accuracy over a chip (and wafer) potentially improving LER and minimizing shot noise typically encountered with contact holes and complex geometries. Refinement of this technique might be the best approach to minimizing shot noise.

See my recent blog interview with Dr. David K. Lam

http://www.thomasdalejay.blogspot.com/2013/05/the-strategic-positioning-of-electron.html

Thomas D. Jay

resistion
User Rank
CEO
Re: Better for masks than wafers
resistion   7/19/2013 9:58:33 PM
NO RATINGS
Shot noise is like a natural dose error, which no lithography wants. A longer wavelength UV maskless mode may be what is needed.

rick merritt
User Rank
Author
Re: Better for masks than wafers
rick merritt   7/19/2013 9:03:19 PM
NO RATINGS
In an email to me David Lam responded in detail as follows:

 

"The real problem is not the doses per se, but the "shot noise".  Shot noise is a stochastic, or statistical, process involving some electrons "spilling over" to the edge of the patterned feature making the edge jagged, leading to "line-edge roughness", or LER.  The smaller the feature the more serious the problem, and the problems plagues all lithographic technologies: 193nm Optical, EUV and E-Beam.  It's a random process due to probability and there is no real cure.  However, the problem can be mitigated.  Mitigating processes are practiced at fabs today to reduce the effect of shot noise and improve LER when needed. "

rick merritt
User Rank
Author
Re: Impressive
rick merritt   7/19/2013 9:02:34 PM
NO RATINGS
In an email, David Lam noted he was the first Asian American to be CEO of a company listed on the tech heavy NASDAQ.  Wang went public on the NYSE.

resistion
User Rank
CEO
Re: Impressive
resistion   7/9/2013 3:32:52 AM
NO RATINGS
Also impressed by Lam but I believe Wang Labs went public in 1967, much earlier than Lam Research was founded.

mcgrathdylan
User Rank
Blogger
Impressive
mcgrathdylan   7/9/2013 1:04:12 AM
NO RATINGS
Pretty impressive that the man is still so passionate about technology at age 70. I never heard that before about Lam being the first company founded by an Asian American to go public. That's pretty cool.

resistion
User Rank
CEO
Better for masks than wafers
resistion   7/8/2013 9:44:03 PM
NO RATINGS
The electron doses are not right for sub-20 nm devices, but the opportunity is ripe for mask writers. Reducing write time for masks is significant value added for sure.



Top Comments of the Week
Flash Poll
Like Us on Facebook

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
EE Life
Frankenstein's Fix, Teardowns, Sideshows, Design Contests, Reader Content & More
Max Maxfield

Want a Voltera Desktop PCB Printer?
Max Maxfield
9 comments
I just received an email from my chum Javi in Spain. "Have you heard about Voltera (VolteraInc.com)? It's a Canadian company that is going to offer desktop-size PCB printers for fast ...

Aubrey Kagan

Have You Ever Been Blindsided by Your Own Design?
Aubrey Kagan
37 comments
I recently read GCHQ: The uncensored story of Britain's most sensitive intelligence agency by Richard J. Aldrich. The Government Communication Headquarters (GCHQ), Britain's equivalent of ...

Martin Rowe

No 2014 Punkin Chunkin, What Will You Do?
Martin Rowe
2 comments
American Thanksgiving is next week, and while some people watch (American) football all day, the real competition on TV has become Punkin Chunkin. But there will be no Punkin Chunkin on TV ...

Rich Quinnell

Making the Grade in Industrial Design
Rich Quinnell
15 comments
As every developer knows, there are the paper specifications for a product design, and then there are the real requirements. The paper specs are dry, bland, and rigidly numeric, making ...

Special Video Section
The LT8640 is a 42V, 5A synchronous step-down regulator ...
The LTC2000 high-speed DAC has low noise and excellent ...
How do you protect the load and ensure output continues to ...
General-purpose DACs have applications in instrumentation, ...
Linear Technology demonstrates its latest measurement ...
10:29
Demos from Maxim Integrated at Electronica 2014 show ...
Bosch CEO Stefan Finkbeiner shows off latest combo and ...
STMicroelectronics demoed this simple gesture control ...
Keysight shows you what signals lurk in real-time at 510MHz ...
TE Connectivity's clear-plastic, full-size model car shows ...
Why culture makes Linear Tech a winner.
Recently formed Architects of Modern Power consortium ...
Specially modified Corvette C7 Stingray responds to ex Indy ...
Avago’s ACPL-K30T is the first solid-state driver qualified ...
NXP launches its line of multi-gate, multifunction, ...
Doug Bailey, VP of marketing at Power Integrations, gives a ...
See how to ease software bring-up with DesignWare IP ...
DesignWare IP Prototyping Kits enable fast software ...
This video explores the LT3086, a new member of our LDO+ ...
In today’s modern electronic systems, the need for power ...