Embedded Systems Conference
Breaking News
Comments
Newest First | Oldest First | Threaded View
<<   <   Page 4 / 4
Kevin Neilson
User Rank
Author
Genesis
Kevin Neilson   7/11/2013 12:45:56 AM
NO RATINGS
Wait a second--I hope this isn't true, because this is exactly what happened with the Genesis probe.  It returned to earth and the drogue was supposed to come out after it had decelerated to a certain speed, but the accelerometers were mounted upside down so the deceleration was interpreted as acceleration and the drogue never came out and the probe cratered in the desert.

LarryM99
User Rank
Author
Re: Quality Control and testing in Space Electronics
LarryM99   7/10/2013 11:55:08 PM
NO RATINGS
We can't necessarily be too smug about this. I seem to remember an American Mars probe that sailed right past that planet because someone put a period instead of a comma in a line of FORTRAN code. I have had friends that worked on the Saturn 5 that left because of the tension of building systems that could never be completely tested prior to a launch. We may be better off today with a combination of more experience and better test equipment, but we are also building more complex systems.

Tom Murphy
User Rank
Author
Dubious Source
Tom Murphy   7/10/2013 9:45:20 PM
NO RATINGS
I'm not sure I'd put a lot of stock in an unidentified source and the Interfax news agency. I mean -- these are rocket scientists we're talking about, and they know how to install sensors.  In any case, how would they know at this point?

_hm
User Rank
Author
Quality Control and testing in Space Electronics
_hm   7/10/2013 8:37:23 PM
NO RATINGS
Quality control in Space electronics is very essential. And this type of mistakes are often discovered. One common exapmple is polarized capacitor. Many times, they are mounted with polarity reversed.

Another aspect is testing. Testing is very improtant in this type of critical missions. It should try to encompass all this possibilities. And yes, poke yoke problem must also be avoided.

CMathas
User Rank
Author
Re: Preventing Upside-Down Sensors
CMathas   7/10/2013 6:11:11 PM
NO RATINGS
Huge failure is right. One would think that there would be several tests and confirmations in place before actual launch. That's a huge loss of resources based on something that should have been easily caught.

DrQuine
User Rank
Author
Preventing Upside-Down Sensors
DrQuine   7/10/2013 4:43:31 PM
NO RATINGS
The use of keyed connectors that can only be assembled one way is a good precaution to prevent reversed connections.  Of course, if the connector is wired backwards that won't help.  The second essential step is to gather baseline data and confirm that the device is operating properly. If indeed the sensor was installed upside-down, it should have been reported inverted data when standing on the launchpad. Exhaustive testing certainly proves its worth if it can catch a tiny error before it causes a huge failure.

<<   <   Page 4 / 4


Radio
NEXT UPCOMING BROADCAST
Why Connect a Car?
May 11, 1pm EDT Monday
Overview: Battle-hardened veterans of the electronics industry have heard of the “connected car” so often that they assume it’s a done deal. But do we really know what it takes to get a car connected and what its future entails? Join EE Times editor Junko Yoshida as she moderates a panel of movers and shakers in the connected car business. Executives from Cisco, Siemens and NXP will share ideas, plans and hopes for connected cars and their future. After the first 30 minutes of the radio show, our listeners will have the opportunity to ask questions via live online chat.
Top Comments of the Week
Flash Poll
Like Us on Facebook

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Special Video Section
LED lighting is an important feature in today’s and future ...
Active balancing of series connected battery stacks exists ...
After a four-year absence, Infineon returns to Mobile World ...
A laptop’s 65-watt adapter can be made 6 times smaller and ...
An industry network should have device and data security at ...
The LTC2975 is a four-channel PMBus Power System Manager ...
In this video, a new high speed CMOS output comparator ...
The LT8640 is a 42V, 5A synchronous step-down regulator ...
The LTC2000 high-speed DAC has low noise and excellent ...
How do you protect the load and ensure output continues to ...
General-purpose DACs have applications in instrumentation, ...
Linear Technology demonstrates its latest measurement ...
10:29
Demos from Maxim Integrated at Electronica 2014 show ...
Bosch CEO Stefan Finkbeiner shows off latest combo and ...
STMicroelectronics demoed this simple gesture control ...
Keysight shows you what signals lurk in real-time at 510MHz ...
TE Connectivity's clear-plastic, full-size model car shows ...
Why culture makes Linear Tech a winner.
Recently formed Architects of Modern Power consortium ...
Specially modified Corvette C7 Stingray responds to ex Indy ...