Design Con 2015
Breaking News
Comments
Newest First | Oldest First | Threaded View
<<   <   Page 3 / 3
Ron Neale
User Rank
Blogger
The laser or flashlight solution
Ron Neale   7/11/2013 6:35:35 PM
NO RATINGS
Buy a cheap laser or for that matter any flashlamp with a decent beam. Move some measured distance from the base of the building. Point the laser at the top of the building and measure the angle that the laser/flashlamp is tilted. A simple trig calculation, using the length of the laser and the distance it is tilted, the accuracy can be increased by intercepting the beam a couple of feet from the ground. The tangent of the angle and the distance from the building will allow its height to be calculated.

Best done at night but be careful to avoid being hit by a barometer that some idiot has dropped from the top of the building

jmumford913
User Rank
Rookie
Put the barometer away...
jmumford913   7/11/2013 5:41:02 PM
NO RATINGS
So you don't risk environmental contamination from the mercury inside the column (inherent in many of these suggestions), then go down to the local building department and pull the blueprints for the building.

Max The Magnificent
User Rank
Blogger
Re: 142 ways
Max The Magnificent   7/11/2013 3:46:28 PM
NO RATINGS
@rcurl: You could use the GPS in your cell phone to get the height of the barometer above sea level while it's on the roof...

LOL

Rcurl
User Rank
Rookie
Re: 142 ways
Rcurl   7/11/2013 3:30:14 PM
NO RATINGS
You could use the GPS in your cell phone to get the height of the barometer above sea level while it's on the roof, then put it on the ground and get a second reading, then just subtract the two.

-OR-

You could throw the barometer over the building and then calculate the trajectory and the time it took it to land on the other side, but the math required to do that is way too complicated for me to figure out. 

Max The Magnificent
User Rank
Blogger
Re: 142 ways
Max The Magnificent   7/10/2013 10:13:21 PM
NO RATINGS
@rmcgee0: This is great - lots of interesting ideas here - but I hope other readers try to come up with their own before looking at the ones in the link you provided. Thanks for sharing.

rmcgee0
User Rank
Rookie
142 ways
rmcgee0   7/10/2013 8:40:17 PM
NO RATINGS
Check out http://www.irontowerstudio.com/forum/index.php?topic=2949.0

 

 

<<   <   Page 3 / 3


Most Recent Comments
Flash Poll
Top Comments of the Week
Like Us on Facebook
EE Times on Twitter
EE Times Twitter Feed

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
EE Life
Frankenstein's Fix, Teardowns, Sideshows, Design Contests, Reader Content & More
Max Maxfield

Book Review: Deadly Odds by Allen Wyler
Max Maxfield
11 comments
Generally speaking, when it comes to settling down with a good book, I tend to gravitate towards science fiction and science fantasy. Having said this, I do spend a lot of time reading ...

Martin Rowe

No 2014 Punkin Chunkin, What Will You Do?
Martin Rowe
1 Comment
American Thanksgiving is next week, and while some people watch (American) football all day, the real competition on TV has become Punkin Chunkin. But there will be no Punkin Chunkin on TV ...

Rich Quinnell

Making the Grade in Industrial Design
Rich Quinnell
14 comments
As every developer knows, there are the paper specifications for a product design, and then there are the real requirements. The paper specs are dry, bland, and rigidly numeric, making ...

Martin Rowe

Book Review: Controlling Radiated Emissions by Design
Martin Rowe
1 Comment
Controlling Radiated Emissions by Design, Third Edition, by Michel Mardiguian. Contributions by Donald L. Sweeney and Roger Swanberg. List price: $89.99 (e-book), $119 (hardcover).