Design Con 2015
Breaking News
Comments
Newest First | Oldest First | Threaded View
JanineLove
User Rank
Blogger
Frankenstein Test Equipment
JanineLove   7/23/2013 9:28:01 AM
NO RATINGS
"Will you need any special test equipment? When will it become available to you?" Anyone ever get to the point where you are ready to test, but the equipment you needed wasn't ready for you? What did you do to punt?

elctrnx_lyf
User Rank
Manager
Re: Poised to throw the power switch
elctrnx_lyf   7/20/2013 4:39:52 AM
NO RATINGS
Board bring up is definitely very interesting part of the board testing. Few minor problems some times give a really long trouble and a big issues can be found easily. Overall the next interesting is the reliability testing for any product.

Sheetal.Pandey
User Rank
Manager
Re: Poised to throw the power switch
Sheetal.Pandey   7/19/2013 1:07:37 PM
NO RATINGS
This reminds me of Board bring up times. Everytime a new board was populated and made ready to test, there was a new problem seen. Processor with BGA package have their own issues. Its so helpful to add as many test points when you are making those initial prototypes. EMI/EMC issues take their own time to solve. But I would say its fun, staying awake long nights sometimes no sleep till the first board is up and repeating on few boards. Its like passing some exam.

Max The Magnificent
User Rank
Blogger
Re: Poised to throw the power switch
Max The Magnificent   7/18/2013 5:28:36 PM
@betajet: Lesson learned: if you have one of those packages with a large ground pad under it, expect that the fab house forgot to put the solder paste under it when making your prototypes.

LOL (but with a sad wry smile)

betajet
User Rank
CEO
Re: Poised to throw the power switch
betajet   7/18/2013 5:05:04 PM
First, I always check that chip power and ground are wired up correctly using an unassembled "solder sample" board and a continuity checker.  Beep... beep... Drives your cow-orkers crazy.


Next, I first power up the board using a lab power supply with current limit.  I slowly raise the voltage to make sure the board is behaving itself.

Lesson learned: if you have one of those packages with a large ground pad under it, expect that the fab house forgot to put the solder paste under it when making your prototypes.  Also, if possible bring the ground pad artwork out from under the chip so you can heat up the pad if you need to resolder the chip.

Adam-Taylor
User Rank
Blogger
Re: Poised to throw the power switch
Adam-Taylor   7/18/2013 3:45:06 PM
NO RATINGS
Max,

You can do this with two wire points on voltage rail which allows isolation of the power from expensive components unitl it has been powered and verified.

Adam

Max The Magnificent
User Rank
Blogger
Poised to throw the power switch
Max The Magnificent   7/17/2013 5:28:57 PM
NO RATINGS
Hi Adam -- I agree that the seconds leading up to your throwing the power switch on a prototype board for the first time are jolly exciting.

In the past, when clock speeds were a lot lower and we were working with dual-in-line (DIL) packages, we used to sucket all the ICs on our prototypes. Before we first powered up the board, we pulled all of the ICs out so we could first check that there were no shorts, and then check that all of the IC sockets had power and ground on the appropriate pins.

It's a lot trickier these days with high clock speeds and surface mount technology, when the prototype board has all the ICs soldered down...



Most Recent Comments
Susan Rambo
 
Susan Rambo
 
sempaiscuba
 
sempaiscuba
 
sempaiscuba
 
sempaiscuba
 
sempaiscuba
 
sempaiscuba
 
joyhaa
Top Comments of the Week
Flash Poll
Like Us on Facebook

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
EE Life
Frankenstein's Fix, Teardowns, Sideshows, Design Contests, Reader Content & More
<b><a href=Betajet">

The Circle – The Future's Imperfect in the Present Tense
Betajet
5 comments
The Circle, a satirical, dystopian novel published in 2013 by San Francisco-based writer Dave Eggers, is about a large, very powerful technology company that combines aspects of Google, ...

Max Maxfield

Recommended Reads From the Engineer's Bookshelf
Max Maxfield
27 comments
I'm not sure if I read more than most folks or not, but I do I know that I spend quite a lot of time reading. I hate to be idle, so I always have a book or two somewhere about my person -- ...

Martin Rowe

Make This Engineering Museum a Reality
Martin Rowe
Post a comment
Vincent Valentine is a man on a mission. He wants to make the first house to ever have a telephone into a telephone museum. Without help, it may not happen.

Rich Quinnell

Making the Grade in Industrial Design
Rich Quinnell
16 comments
As every developer knows, there are the paper specifications for a product design, and then there are the real requirements. The paper specs are dry, bland, and rigidly numeric, making ...

Special Video Section
The LT8640 is a 42V, 5A synchronous step-down regulator ...
The LTC2000 high-speed DAC has low noise and excellent ...
How do you protect the load and ensure output continues to ...
General-purpose DACs have applications in instrumentation, ...
Linear Technology demonstrates its latest measurement ...
10:29
Demos from Maxim Integrated at Electronica 2014 show ...
Bosch CEO Stefan Finkbeiner shows off latest combo and ...
STMicroelectronics demoed this simple gesture control ...
Keysight shows you what signals lurk in real-time at 510MHz ...
TE Connectivity's clear-plastic, full-size model car shows ...
Why culture makes Linear Tech a winner.
Recently formed Architects of Modern Power consortium ...
Specially modified Corvette C7 Stingray responds to ex Indy ...
Avago’s ACPL-K30T is the first solid-state driver qualified ...
NXP launches its line of multi-gate, multifunction, ...
Doug Bailey, VP of marketing at Power Integrations, gives a ...
See how to ease software bring-up with DesignWare IP ...
DesignWare IP Prototyping Kits enable fast software ...
This video explores the LT3086, a new member of our LDO+ ...
In today’s modern electronic systems, the need for power ...