Breaking News
Comments
Newest First | Oldest First | Threaded View
<<   <   Page 14 / 20   >   >>
AlanWinstanley
User Rank
Author
Re: Book to learn better soldering ??
AlanWinstanley   8/15/2013 10:45:59 AM
NO RATINGS
@ MohKraats  

That image was just one from a sequence of text and images. The snapshot showed the moment when solder was being raised away again after applying a sufficient amount to the joint already. The solder wire was "in the air" between the lens and the joint, and was not resting on the iron itself. That's just when the radio trigger caught it on camera.

In the accompanying text that unfortunately you did not see, I explained that the soldering iron has to heat all parts of the joint and solder is then applied to the joint. I also explain the basics of conduction, power ratings and heat sinking out of the iron, so that beginners get to understand what's happening when they choose and use a soldering iron for the first time.

I don't claim to be the world's greatest at anything but after 40+ years I'm not a beginner either! :)

 -- Alan Winstanley

MeasurementBlues
User Rank
Author
Re: Soldering course for engineers
MeasurementBlues   8/15/2013 10:12:59 AM
NO RATINGS
@Max, You mean like this? A little excess solder, but it worked and has apparently survived the summer at overnight camp. The pull-up-resistor lets a mini-USB cable charge an mp3 player. Customer Is Happy, but I'm Not.



MeasurementBlues
User Rank
Author
Max The Magnificent
User Rank
Author
Re: Soldering class
Max The Magnificent   8/15/2013 9:59:19 AM
NO RATINGS
@kfield: Ah, heck with dinner. Let's go straight to the drinks!


Good Grief -- you are a real engineer!

Max The Magnificent
User Rank
Author
Re: Soldering class
Max The Magnificent   8/15/2013 9:57:58 AM
NO RATINGS
@MeasurementBlues: You know where to find me.

"Of all the knish bars in all the world..."

Max The Magnificent
User Rank
Author
Re: I feel your pain
Max The Magnificent   8/15/2013 9:56:53 AM
NO RATINGS
@MeasurementBlues: ...but the fact that I can't see the parts very well.

Growing old is a real pain ... so I'm not going to do it anymore :-)

In my case I'm short-sighted -- so I can see things close up without my glasses -- it's things that are further away that cause me problems.

kfield
User Rank
Author
Re: Soldering class
kfield   8/15/2013 9:56:15 AM
NO RATINGS
@measurementblues  Ah, heck with dinner. Let's go straight to the drinks!

MeasurementBlues
User Rank
Author
Re: Soldering class
MeasurementBlues   8/15/2013 9:55:27 AM
NO RATINGS
"it would be fun to have dinner with you and just hear war stories!"

You know where to find me.

MeasurementBlues
User Rank
Author
Re: I feel your pain
MeasurementBlues   8/15/2013 9:54:10 AM
NO RATINGS
These days, my problem with solding has nothing to do with solder, but the fact that I can't see the parts very well. If I take off my glasses, then my face is so close to the hot soldering iron that I can feel the heat. Even a soldering iron with LEDs doesn't help.



Max The Magnificent
User Rank
Author
Re: Bah humbug about soldering's importance
Max The Magnificent   8/15/2013 9:52:37 AM
NO RATINGS
@JackOfManyTrades: I'd argue they're not real MECHANICAL engineers.

Hey -- some of my best friends are mechanical engineers (well, they would be if I knew any :-)

<<   <   Page 14 / 20   >   >>


Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Radio
NEXT UPCOMING BROADCAST

What are the engineering and design challenges in creating successful IoT devices? These devices are usually small, resource-constrained electronics designed to sense, collect, send, and/or interpret data. Some of the devices need to be smart enough to act upon data in real time, 24/7. Are the design challenges the same as with embedded systems, but with a little developer- and IT-skills added in? What do engineers need to know? Rick Merritt talks with two experts about the tools and best options for designing IoT devices in 2016. Specifically the guests will discuss sensors, security, and lessons from IoT deployments.
Like Us on Facebook
Special Video Section
The quality and reliability of Mill-Max's two-piece ...
01:34
The quality and reliability of Mill-Max's two-piece ...
LED lighting is an important feature in today’s and future ...
05:27
The LT8602 has two high voltage buck regulators with an ...
05:18
Silego Technology’s highly versatile Mixed-signal GreenPAK ...
The quality and reliability of Mill-Max's two-piece ...
01:34
Why the multicopter? It has every thing in it. 58 of ...
Security is important in all parts of the IoT chain, ...
Infineon explains their philosophy and why the multicopter ...
The LTC4282 Hot SwapTM controller allows a board to be ...
This video highlights the Zynq® UltraScale+™ MPSoC, and sho...
Homeowners may soon be able to store the energy generated ...
The LTC®6363 is a low power, low noise, fully differential ...
See the Virtex® UltraScale+™ FPGA with 32.75G backplane ...
Vincent Ching, applications engineer at Avago Technologies, ...
The LT®6375 is a unity-gain difference amplifier which ...
The LTC®4015 is a complete synchronous buck controller/ ...
10:35
The LTC®2983 measures a wide variety of temperature sensors ...
The LTC®3886 is a dual PolyPhase DC/DC synchronous ...
The LTC®2348-18 is an 18-bit, low noise 8-channel ...