Design Con 2015
Breaking News
Comments
Newest First | Oldest First | Threaded View
Page 1 / 4   >   >>
Max The Magnificent
User Rank
Blogger
Re: printer, really?!
Max The Magnificent   9/4/2013 1:19:19 PM
NO RATINGS
@Duane: If you need anything 3D printed for your robot avatar, just send me the files :-)

Duane Benson
User Rank
Blogger
Re: printer, really?!
Duane Benson   9/4/2013 1:09:02 PM
NO RATINGS
I really should be buying one of these myself. As I implied in my dot matrix example from my earlier comment, I was an early adopter with dot matrix printers. My first word processor used capitol letters only in, I think, a 7x9 dot matrix. Other people thought I was nuts. My writing instructors couldn't decided whether they should accept it or not. I was thrilled with it.

I couldn't use my dot matrix printer to replace 1200 DPI (dot per inch) commercial printing, but I could do things that simply were not otherwise possible.

I would also be buying one of these things except, for the moment, there are too many other things on the list ahead of the 3D printer.

Aeroengineer
User Rank
Blogger
Re: printer, really?!
Aeroengineer   9/4/2013 10:00:05 AM
NO RATINGS
Max,

 

I am not saying that they do not have use, it is just not there for what I am looking for (yet).

Max The Magnificent
User Rank
Blogger
Re: Mill, 3D Print & 3D Scan From 1 Machine
Max The Magnificent   9/4/2013 9:53:35 AM
NO RATINGS
@Caleb: I'm saying get one of those, or the camera that came out with the tiny projector and house it in your 3d printed watch case. It would be bulky, but fitting with the comic. Then you can walk up to any wall and have your "hologram". Perfect costume piece.

Oooohhhh -- I hadn't thought of that -- what a GREAT idea!!!


 

Caleb Kraft
User Rank
Blogger
Re: Mill, 3D Print & 3D Scan From 1 Machine
Caleb Kraft   9/4/2013 9:52:53 AM
NO RATINGS
Here, pull the picoprojector out of one of these: 

http://www.buydig.com/shop/product.aspx?sku=GEPJ1BK&ref=PLA&omid=103&CAWELAID=1503876235&catargetid=1875426446&cadevice=c&&cagpspn=pla

 

shouldn't be too hard to figure out how to drive it. 

Caleb Kraft
User Rank
Blogger
Re: Mill, 3D Print & 3D Scan From 1 Machine
Caleb Kraft   9/4/2013 9:51:38 AM
NO RATINGS
forget 20 years, I'm saying get one of those, or the camera that came out with the tiny projector and house it in your 3d printed watch case. It would be bulky, but fitting with the comic. Then you can walk up to any wall and have your "hologram". Perfect costume piece. 

Max The Magnificent
User Rank
Blogger
Re: printer, really?!
Max The Magnificent   9/4/2013 9:50:00 AM
NO RATINGS
@Aeroengineer: I think that we will see improvements in the next 5 years.

I don't care what you say -- you cannot dampen my enthusiasm -- I can't wait to play with my 3D printer (which should arrive any day now ... maybe even today!!!)

Max The Magnificent
User Rank
Blogger
Re: Mill, 3D Print & 3D Scan From 1 Machine
Max The Magnificent   9/4/2013 9:47:59 AM
NO RATINGS
@Caleb: If you could only get your hands on one of these!

http://www.gadgets-reviews.com/tiny-projector-for-cell-phones.html

 

Very cool. I honestly don't think we have any idea what the world (of technology) is going to look like in 10 or 20 years ... just think that the first iPhone was only introduced 6 years ago and the first iPad only 3 years ago ... 

Aeroengineer
User Rank
Blogger
Re: printer, really?!
Aeroengineer   9/4/2013 9:43:49 AM
NO RATINGS
Caleb,

 

Even some of those are not all that great.  I had a recent experience where I attempted to use Shapeways.  I designed my part to the letter in accordance to their published specifications and the result was less than impressive.  I have worked with much more costly services, and can say that the results were impressive, but at a cost that I could have (as a hobbiest) made a similar or better quality part by hand.

 

I am hoping that the consumer market will advance at a faster pace.  Seeing that companies like Microsoft and Autodesk are aligning to support this industry, I think that we will see improvements in the next 5 years.

Caleb Kraft
User Rank
Blogger
Re: Mill, 3D Print & 3D Scan From 1 Machine
Caleb Kraft   9/4/2013 9:41:37 AM
NO RATINGS
If you could only get your hands on one of these!

http://www.gadgets-reviews.com/tiny-projector-for-cell-phones.html

Page 1 / 4   >   >>


Most Recent Comments
Freek35
 
ROOMTEMPSC
 
seaEE
 
collin0
 
betajet
 
betajet
 
Bert22306
 
perl_geek
 
GregB1
Top Comments of the Week
Flash Poll
Like Us on Facebook

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
EE Life
Frankenstein's Fix, Teardowns, Sideshows, Design Contests, Reader Content & More
Max Maxfield

Want a Voltera Desktop PCB Printer?
Max Maxfield
9 comments
I just received an email from my chum Javi in Spain. "Have you heard about Voltera (VolteraInc.com)? It's a Canadian company that is going to offer desktop-size PCB printers for fast ...

Aubrey Kagan

Have You Ever Been Blindsided by Your Own Design?
Aubrey Kagan
37 comments
I recently read GCHQ: The uncensored story of Britain's most sensitive intelligence agency by Richard J. Aldrich. The Government Communication Headquarters (GCHQ), Britain's equivalent of ...

Martin Rowe

No 2014 Punkin Chunkin, What Will You Do?
Martin Rowe
2 comments
American Thanksgiving is next week, and while some people watch (American) football all day, the real competition on TV has become Punkin Chunkin. But there will be no Punkin Chunkin on TV ...

Rich Quinnell

Making the Grade in Industrial Design
Rich Quinnell
15 comments
As every developer knows, there are the paper specifications for a product design, and then there are the real requirements. The paper specs are dry, bland, and rigidly numeric, making ...

Special Video Section
The LT8640 is a 42V, 5A synchronous step-down regulator ...
The LTC2000 high-speed DAC has low noise and excellent ...
How do you protect the load and ensure output continues to ...
General-purpose DACs have applications in instrumentation, ...
Linear Technology demonstrates its latest measurement ...
10:29
Demos from Maxim Integrated at Electronica 2014 show ...
Bosch CEO Stefan Finkbeiner shows off latest combo and ...
STMicroelectronics demoed this simple gesture control ...
Keysight shows you what signals lurk in real-time at 510MHz ...
TE Connectivity's clear-plastic, full-size model car shows ...
Why culture makes Linear Tech a winner.
Recently formed Architects of Modern Power consortium ...
Specially modified Corvette C7 Stingray responds to ex Indy ...
Avago’s ACPL-K30T is the first solid-state driver qualified ...
NXP launches its line of multi-gate, multifunction, ...
Doug Bailey, VP of marketing at Power Integrations, gives a ...
See how to ease software bring-up with DesignWare IP ...
DesignWare IP Prototyping Kits enable fast software ...
This video explores the LT3086, a new member of our LDO+ ...
In today’s modern electronic systems, the need for power ...