Embedded Systems Conference
Breaking News
Comments
Newest First | Oldest First | Threaded View
resistion
User Rank
Author
Safety in numbers?
resistion   11/5/2013 10:16:07 PM
NO RATINGS
Maybe having so many CNTs involved gives robustness, but this also means less reliability with scaling, as fewer CNTs can be involved. Like they can't do a few nm thick.

PhyandEE
User Rank
Author
Re: Shaking nano cantilver NV
PhyandEE   10/6/2013 10:45:11 PM
NO RATINGS
TiN looks like a fantastic material. It could be the key in this structure.

 

Ron Neale
User Rank
Author
Shaking nano cantilver NV
Ron Neale   9/18/2013 6:42:59 PM
NO RATINGS
There is a paper at SSDM 2013 that might have relevance to the performance of Nantera's CNT cantilever based memory. Titled "Release of Stuck Carbon Nanotube Arm by Resonant Vibration Toward Nano Relay Application, by T Tagota et al, as a joint effort by a team from Osaka Prefecture University and KRI Inc, Japan.

In the past Nantera reported that their memory had survived a trip in space, with all the vibration of blast off, it could be that test did not expose the memory to a critical resonant frequency. However, here again, as mentioned in my post below the redundacy afforded by the  use of multiple cantilevers in each memory cell means that the loss of a couple by shaking may not be too much of a problem. It is unlikely they will all have the same resonant frequency.

 

Peter Clarke
User Rank
Author
Re: Visionary...
Peter Clarke   9/18/2013 6:44:04 AM
NO RATINGS
Maybe he thought it was a duff idea as a flexible CNT mat over an etched trench in silicon.

But when Nantero went in-via, he fell in love. 

GroovyGeek
User Rank
Author
Visionary...
GroovyGeek   9/17/2013 7:57:48 PM
NO RATINGS
"Given my experience with non-volatile memory, I immediately saw that Nantero's memory could transform the industry"

This is one of the more boneheaded comments an exec can make when joining a 10 year old "startup".  What took you so long?  Nantero has been peddling the same idea for a decade. 

Ron Neale
User Rank
Author
Re: vacuum packed?
Ron Neale   9/16/2013 7:27:34 PM
NO RATINGS
Good question Resition- If it is anything more than vaccum or a few atoms of gas then the drag on the nano-cantilevers would appear to have have the potential to stop the device from working. If the CNT fabric is spun on then it should be "relatively easy" to vacuum remove the solvent prior to metal electrode deposition.

It would be equally interesting to know  in each NRAM memory cell how many nano-cantilevers are involved in each switching event. It would appear there is a large amount of redundancy so a few failures could be tolerated. In the 3D fabric a stuck on or stuck off would require opening up a few new paths. The cantilevers involved number might have implications for scaling.

 

resistion
User Rank
Author
vacuum packed?
resistion   9/16/2013 5:43:46 PM
NO RATINGS
The CNTs move in vacuum or what ambient?



Radio
NEXT UPCOMING BROADCAST
In conjunction with unveiling of EE Times’ Silicon 60 list, journalist & Silicon 60 researcher Peter Clarke hosts a conversation on startups in the electronics industry. One of Silicon Valley's great contributions to the world has been the demonstration of how the application of entrepreneurship and venture capital to electronics and semiconductor hardware can create wealth with developments in semiconductors, displays, design automation, MEMS and across the breadth of hardware developments. But in recent years concerns have been raised that traditional venture capital has turned its back on hardware-related startups in favor of software and Internet applications and services. Panelists from incubators join Peter Clarke in debate.
Most Recent Comments
resistion
 
resistion
 
resistion
 
R_Colin_Johnson
 
David Ashton
 
David Ashton
 
David Ashton
 
David Ashton
 
Ron Neale
Flash Poll
Top Comments of the Week
Like Us on Facebook

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Special Video Section
The LT®3042 is a high performance low dropout linear ...
Chwan-Jye Foo (C.J Foo), product marketing manager for ...
The LT®3752/LT3752-1 are current mode PWM controllers ...
LED lighting is an important feature in today’s and future ...
Active balancing of series connected battery stacks exists ...
After a four-year absence, Infineon returns to Mobile World ...
A laptop’s 65-watt adapter can be made 6 times smaller and ...
An industry network should have device and data security at ...
The LTC2975 is a four-channel PMBus Power System Manager ...
In this video, a new high speed CMOS output comparator ...
The LT8640 is a 42V, 5A synchronous step-down regulator ...
The LTC2000 high-speed DAC has low noise and excellent ...
How do you protect the load and ensure output continues to ...
General-purpose DACs have applications in instrumentation, ...
Linear Technology demonstrates its latest measurement ...
10:29
Demos from Maxim Integrated at Electronica 2014 show ...
Bosch CEO Stefan Finkbeiner shows off latest combo and ...
STMicroelectronics demoed this simple gesture control ...
Keysight shows you what signals lurk in real-time at 510MHz ...
TE Connectivity's clear-plastic, full-size model car shows ...