Breaking News
Comments
Newest First | Oldest First | Threaded View
resistion
User Rank
Author
Safety in numbers?
resistion   11/5/2013 10:16:07 PM
NO RATINGS
Maybe having so many CNTs involved gives robustness, but this also means less reliability with scaling, as fewer CNTs can be involved. Like they can't do a few nm thick.

PhyandEE
User Rank
Author
Re: Shaking nano cantilver NV
PhyandEE   10/6/2013 10:45:11 PM
NO RATINGS
TiN looks like a fantastic material. It could be the key in this structure.

 

Ron Neale
User Rank
Author
Shaking nano cantilver NV
Ron Neale   9/18/2013 6:42:59 PM
NO RATINGS
There is a paper at SSDM 2013 that might have relevance to the performance of Nantera's CNT cantilever based memory. Titled "Release of Stuck Carbon Nanotube Arm by Resonant Vibration Toward Nano Relay Application, by T Tagota et al, as a joint effort by a team from Osaka Prefecture University and KRI Inc, Japan.

In the past Nantera reported that their memory had survived a trip in space, with all the vibration of blast off, it could be that test did not expose the memory to a critical resonant frequency. However, here again, as mentioned in my post below the redundacy afforded by the  use of multiple cantilevers in each memory cell means that the loss of a couple by shaking may not be too much of a problem. It is unlikely they will all have the same resonant frequency.

 

Peter Clarke
User Rank
Author
Re: Visionary...
Peter Clarke   9/18/2013 6:44:04 AM
NO RATINGS
Maybe he thought it was a duff idea as a flexible CNT mat over an etched trench in silicon.

But when Nantero went in-via, he fell in love. 

GroovyGeek
User Rank
Author
Visionary...
GroovyGeek   9/17/2013 7:57:48 PM
NO RATINGS
"Given my experience with non-volatile memory, I immediately saw that Nantero's memory could transform the industry"

This is one of the more boneheaded comments an exec can make when joining a 10 year old "startup".  What took you so long?  Nantero has been peddling the same idea for a decade. 

Ron Neale
User Rank
Author
Re: vacuum packed?
Ron Neale   9/16/2013 7:27:34 PM
NO RATINGS
Good question Resition- If it is anything more than vaccum or a few atoms of gas then the drag on the nano-cantilevers would appear to have have the potential to stop the device from working. If the CNT fabric is spun on then it should be "relatively easy" to vacuum remove the solvent prior to metal electrode deposition.

It would be equally interesting to know  in each NRAM memory cell how many nano-cantilevers are involved in each switching event. It would appear there is a large amount of redundancy so a few failures could be tolerated. In the 3D fabric a stuck on or stuck off would require opening up a few new paths. The cantilevers involved number might have implications for scaling.

 

resistion
User Rank
Author
vacuum packed?
resistion   9/16/2013 5:43:46 PM
NO RATINGS
The CNTs move in vacuum or what ambient?



Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Radio
NEXT UPCOMING BROADCAST

What are the engineering and design challenges in creating successful IoT devices? These devices are usually small, resource-constrained electronics designed to sense, collect, send, and/or interpret data. Some of the devices need to be smart enough to act upon data in real time, 24/7. Are the design challenges the same as with embedded systems, but with a little developer- and IT-skills added in? What do engineers need to know? Rick Merritt talks with two experts about the tools and best options for designing IoT devices in 2016. Specifically the guests will discuss sensors, security, and lessons from IoT deployments.
Most Recent Comments
Like Us on Facebook
Special Video Section
Linear Technology’s LT8330 and LT8331, two Low Quiescent ...
The quality and reliability of Mill-Max's two-piece ...
01:34
The quality and reliability of Mill-Max's two-piece ...
LED lighting is an important feature in today’s and future ...
05:27
The LT8602 has two high voltage buck regulators with an ...
05:18
Silego Technology’s highly versatile Mixed-signal GreenPAK ...
The quality and reliability of Mill-Max's two-piece ...
01:34
Why the multicopter? It has every thing in it. 58 of ...
Security is important in all parts of the IoT chain, ...
Infineon explains their philosophy and why the multicopter ...
The LTC4282 Hot SwapTM controller allows a board to be ...
This video highlights the Zynq® UltraScale+™ MPSoC, and sho...
Homeowners may soon be able to store the energy generated ...
The LTC®6363 is a low power, low noise, fully differential ...
See the Virtex® UltraScale+™ FPGA with 32.75G backplane ...
Vincent Ching, applications engineer at Avago Technologies, ...
The LT®6375 is a unity-gain difference amplifier which ...
The LTC®4015 is a complete synchronous buck controller/ ...
10:35
The LTC®2983 measures a wide variety of temperature sensors ...
The LTC®3886 is a dual PolyPhase DC/DC synchronous ...