Design Con 2015
Breaking News
Comments
Newest First | Oldest First | Threaded View
Page 1 / 2   >   >>
Jack.L
User Rank
CEO
Re: Good for high CRI
Jack.L   9/23/2013 12:01:11 PM
NO RATINGS
You are trying to use the exception to prove the rule. That is not the way marketing or buying behaviours work.

That said, your comment is not accurate. Endoscopy today is primarily camera based. Cameras do not have a need for "CRI" like humans do since their response can be tailored to the light source.

_hm
User Rank
CEO
Re: Good for high CRI
_hm   9/20/2013 6:01:12 PM
NO RATINGS
Many applications do require high CRI. e.g. lighting for endoscopy. There must be good characterization of CRI and should be nicely documented in datasheet. This will make many designer's life much better. When acquiring image it does makes lots of difference.

 

Jack.L
User Rank
CEO
Re: Good for high CRI
Jack.L   9/19/2013 7:17:21 PM
NO RATINGS
Why? There is really no justification for that at all.

Without intimate knowledge of a scene and that same scene having lots of red, most people would not be able to tell if the light source was 85 or 95CRI. Side by side comparison, maybe, but without a reference no.

CRI is not a great measurement of color fidelity anyway. CRI is only a measure effectively of how well a light source either matches a blackbody radiator at some CCTs and sunlight at others. Given the vast amount of 4000K lighting, there is no blackbody reference comparison or sunlight for that matter than anyone could really make.

You can make lower CRI sources look better than high CRI sources depending on the color gamut, and spectral pattern.

If you want to mimic an incadenscent bulb perfectly great, but the prevalence of 2700-3000K sources in terms of evolutionary biology are pretty near nil. Even when sunlight is in the CCT range, it does not look blackbody.

_hm
User Rank
CEO
Re: Good for high CRI
_hm   9/19/2013 6:44:21 PM
NO RATINGS
That is very good news about high efficiency. But CRI needs to be 95 or better.

 

Jack.L
User Rank
CEO
Re: Good for high CRI
Jack.L   9/18/2013 11:27:36 PM
NO RATINGS
White is "white" no matter how achieved. That said I don't really see how their design is "whiter" than other white LEDs with multiple band-gaps that create overlapping spectrums that add up to white. Effectively that is all they are doing. It just sounds like academic double-speak, not to downplay the accomplishment.

One of the posters talked about getting past 50%. We are already there. State of the art white LED (blue pumped phosphor) are already at or greater than 50% wall plug efficiency. The blue die on its own is hitting 60%.

R_Colin_Johnson
User Rank
Blogger
Re: What about brightness and power efficiency?
R_Colin_Johnson   9/18/2013 11:01:33 PM
These researchers are shooting for OLED applications--backlights, light bulb replacements and such. They also claim their approach will be lower cost, because of the extreme simplicity of their design--no pixels or phosphors, but its too early to say whether longevity will be enhanced too. 

LarryM99
User Rank
CEO
What about brightness and power efficiency?
LarryM99   9/18/2013 7:41:54 PM
NO RATINGS
It seems like a major growth field for LEDs is automotive applications, particularly headlights. Are these as bright and power-efficient as current technologies? Do they last as long as well?

Cost is also a consideration. I see expensive metals, but how much does that translate into increased cost per unit?

Kinnar
User Rank
CEO
It has shown positive results but actual white LED is yet to come
Kinnar   9/18/2013 6:52:31 AM
NO RATINGS
The research has shown a very positive results in terms of efficiency and colour control, but infact this will still require many to find out the real white out of it. As none of the experiments have resulted in a white colour outputing LED. If a cheap metal can replace platinun it can be really an affordable light.

R_Colin_Johnson
User Rank
Blogger
Re: Good for high CRI
R_Colin_Johnson   9/17/2013 10:36:45 PM
NO RATINGS
I asked them the same question, and they said that any "heavy" metal might enable this polymer to be both fluorescent and phosphorescent, platinum was just the best candidate. And in the next phase of their research they plan to try out others.

daleste
User Rank
CEO
Re: Good for high CRI
daleste   9/17/2013 9:58:01 PM
NO RATINGS
Interesting technology.  Any chance of obtaining the same results with other metals?  Seems like everything we do requires expensive raw materials.

Page 1 / 2   >   >>


Top Comments of the Week
Flash Poll
Like Us on Facebook

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
EE Life
Frankenstein's Fix, Teardowns, Sideshows, Design Contests, Reader Content & More
Max Maxfield

Recommended Reads From the Engineer's Bookshelf
Max Maxfield
Post a comment
I'm not sure if I read more than most folks or not, but I do I know that I spend quite a lot of time reading. I hate to be idle, so I always have a book or two somewhere about my person -- ...

Aubrey Kagan

Have You Ever Been Blindsided by Your Own Design?
Aubrey Kagan
37 comments
I recently read GCHQ: The uncensored story of Britain's most sensitive intelligence agency by Richard J. Aldrich. The Government Communication Headquarters (GCHQ), Britain's equivalent of ...

Martin Rowe

No 2014 Punkin Chunkin, What Will You Do?
Martin Rowe
2 comments
American Thanksgiving is next week, and while some people watch (American) football all day, the real competition on TV has become Punkin Chunkin. But there will be no Punkin Chunkin on TV ...

Rich Quinnell

Making the Grade in Industrial Design
Rich Quinnell
15 comments
As every developer knows, there are the paper specifications for a product design, and then there are the real requirements. The paper specs are dry, bland, and rigidly numeric, making ...

Special Video Section
The LT8640 is a 42V, 5A synchronous step-down regulator ...
The LTC2000 high-speed DAC has low noise and excellent ...
How do you protect the load and ensure output continues to ...
General-purpose DACs have applications in instrumentation, ...
Linear Technology demonstrates its latest measurement ...
10:29
Demos from Maxim Integrated at Electronica 2014 show ...
Bosch CEO Stefan Finkbeiner shows off latest combo and ...
STMicroelectronics demoed this simple gesture control ...
Keysight shows you what signals lurk in real-time at 510MHz ...
TE Connectivity's clear-plastic, full-size model car shows ...
Why culture makes Linear Tech a winner.
Recently formed Architects of Modern Power consortium ...
Specially modified Corvette C7 Stingray responds to ex Indy ...
Avago’s ACPL-K30T is the first solid-state driver qualified ...
NXP launches its line of multi-gate, multifunction, ...
Doug Bailey, VP of marketing at Power Integrations, gives a ...
See how to ease software bring-up with DesignWare IP ...
DesignWare IP Prototyping Kits enable fast software ...
This video explores the LT3086, a new member of our LDO+ ...
In today’s modern electronic systems, the need for power ...