Design Con 2015
Breaking News
Comments
Newest First | Oldest First | Threaded View
<<   <   Page 2 / 4   >   >>
Duane Benson
User Rank
Blogger
Re: What am I missing?
Duane Benson   11/13/2013 1:07:26 PM
NO RATINGS
Their SMT breakout boards are the impressive ones. They have a system with inset channels that are pre soldered. An SOIC, SSOP, QFP or other chip with leads can be very easily fixed into place with the inset channel pads. I'd definately recommend going to their website and watching the videos.

One note of caution though - you probably shouldn't try to use a Schmartboard for the first time with your only chip. Especially if it's a QFN. I tried it for the first time with a 3mm x 3mm, 12 pin QFN. I managed to cross-solder all of the leads on one side. The parts with leads are easy to align and keep aligned, but QFNs are a little more difficult.

I am planning on ordering some more parts and trying it again though. I need access to the pins on this little part and, other than making a custom board, there really isn't any other practical way to do so. Wish me luck.

Max The Magnificent
User Rank
Blogger
Re: What am I missing?
Max The Magnificent   9/19/2013 4:44:00 PM
NO RATINGS
@elektryk: ...and all of them are claiming they are best.

The little scamps! :-)

elektryk
User Rank
Rookie
Re: What am I missing?
elektryk   9/19/2013 4:38:40 PM
NO RATINGS
Max, I was using such board (square pads on one side, round on another, metalised hole), at least TEN! years ago. I do not understand what is so impressive in SchmartBoard. There are multiple companies, manufacturing similar universal board for THT and SMD, and all of them are claiming they are best.

BadAssBob
User Rank
Rookie
Love this stuff
BadAssBob   9/19/2013 7:56:50 AM
NO RATINGS
Kepp up the good work.  Your products are great!

geckoelectronics
User Rank
Rookie
Re: Looks Interesting.
geckoelectronics   9/19/2013 5:15:15 AM
NO RATINGS
SchmartBoard makes it easy to hand solder SMD components.

nikood
User Rank
Rookie
Re: Looks like fun
nikood   9/19/2013 3:01:52 AM
NO RATINGS
Looks fun. I love such kind of stuff. Will try myself. 

Birkin

DRegalia
User Rank
Rookie
Back to being a soldering pro
DRegalia   9/19/2013 1:53:33 AM
NO RATINGS
Honestly, I have been out of practice for a while.  My first interaction with Schmartboard was these little round piece of solder I was using for Arduino projects.  Now I'm a firm believer in all they do.  It's not just these boards, it's the boards for their chips, it's these easy solder boards.  I have gotten kind of spoiled now with their products.  Really, take a moment to check their site.  My soldering skills are back on par, but I was able to get my 12 year old daughter to solder with their little solder rings.  She's hanging out with me now because she can help.  The products are great, and like I read before in here.. I too am suprised that they're the only ones doing this.

emuman100
User Rank
Rookie
I love Schmartboard!
emuman100   9/19/2013 1:49:26 AM
NO RATINGS
For SMT prototyping, especially those situations you need a devoce, like a single logic inverter in your circuit and SOT23 and smaller packages are available, Schmartboard is the answer! Plus, the board has pads that are hollowed out and tinned so aligning of a tiny SMT device is a cinch. The board in the article looks like it'll make prototyping a breeze!

EEtwidget
User Rank
Rookie
SchmartBoard
EEtwidget   9/19/2013 1:48:41 AM
NO RATINGS
Stop making me schlep around for my prototyping needs! SchmartBoard yet again makes my life better.

ldgray
User Rank
Rookie
Breakout boards look great, too
ldgray   9/19/2013 1:20:26 AM
NO RATINGS
I have been looking at their SOT-23 and SOIC breakout boards too, lately.  At about $6 for a set of these (multiple), they are a great deal: Each of them has grooved traces pre-filled with solder that you can just heat up with a fine tipped soldering iron. This'll help my first SMT project prototype more smoothly for sure, and I think I'll order these gridded boards too.

<<   <   Page 2 / 4   >   >>


Top Comments of the Week
Flash Poll
Like Us on Facebook

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
EE Life
Frankenstein's Fix, Teardowns, Sideshows, Design Contests, Reader Content & More
Max Maxfield

Recommended Reads From the Engineer's Bookshelf
Max Maxfield
1 Comment
I'm not sure if I read more than most folks or not, but I do I know that I spend quite a lot of time reading. I hate to be idle, so I always have a book or two somewhere about my person -- ...

Aubrey Kagan

Have You Ever Been Blindsided by Your Own Design?
Aubrey Kagan
37 comments
I recently read GCHQ: The uncensored story of Britain's most sensitive intelligence agency by Richard J. Aldrich. The Government Communication Headquarters (GCHQ), Britain's equivalent of ...

Martin Rowe

No 2014 Punkin Chunkin, What Will You Do?
Martin Rowe
2 comments
American Thanksgiving is next week, and while some people watch (American) football all day, the real competition on TV has become Punkin Chunkin. But there will be no Punkin Chunkin on TV ...

Rich Quinnell

Making the Grade in Industrial Design
Rich Quinnell
15 comments
As every developer knows, there are the paper specifications for a product design, and then there are the real requirements. The paper specs are dry, bland, and rigidly numeric, making ...

Special Video Section
The LT8640 is a 42V, 5A synchronous step-down regulator ...
The LTC2000 high-speed DAC has low noise and excellent ...
How do you protect the load and ensure output continues to ...
General-purpose DACs have applications in instrumentation, ...
Linear Technology demonstrates its latest measurement ...
10:29
Demos from Maxim Integrated at Electronica 2014 show ...
Bosch CEO Stefan Finkbeiner shows off latest combo and ...
STMicroelectronics demoed this simple gesture control ...
Keysight shows you what signals lurk in real-time at 510MHz ...
TE Connectivity's clear-plastic, full-size model car shows ...
Why culture makes Linear Tech a winner.
Recently formed Architects of Modern Power consortium ...
Specially modified Corvette C7 Stingray responds to ex Indy ...
Avago’s ACPL-K30T is the first solid-state driver qualified ...
NXP launches its line of multi-gate, multifunction, ...
Doug Bailey, VP of marketing at Power Integrations, gives a ...
See how to ease software bring-up with DesignWare IP ...
DesignWare IP Prototyping Kits enable fast software ...
This video explores the LT3086, a new member of our LDO+ ...
In today’s modern electronic systems, the need for power ...