Breaking News
<<   <   Page 6 / 7   >   >>
User Rank
Blogger
Re: What does "Torque: 0.78Kg-cm (rated load)" mean?
10/25/2013 4:47:47 PM
NO RATINGS
@aeroengineer: Also to note you may need more power to get up a bump in the road and such

I'm primarily going to have it scurrying aroudn the hardwood floors in our house -- no bumps or anything like that to worry about

User Rank
Blogger
Re: What does "Torque: 0.78Kg-cm (rated load)" mean?
10/25/2013 4:32:44 PM
NO RATINGS
now I'm curious! I want to know what you guys are working on!

User Rank
Blogger
Re: What does "Torque: 0.78Kg-cm (rated load)" mean?
10/25/2013 4:22:55 PM
NO RATINGS
From no happy dance to school girl squeal in about 30 seconds. You are one mercurial guy max.

User Rank
Blogger
Re: Motors
10/25/2013 4:11:58 PM
NO RATINGS
Unfortunately, I have not any background on motors dynamics, and torque specs are like black magic for me :-(

Having said this, thank you very much for the detail photo of the wheels. When I read your previous blog, I was wondering how the robot was going to deal with the "dragging" force of the remaining perpendicular wheel when moving in a straight line. Now the mechanism is crystal clear!!

User Rank
Blogger
Re: What does "Torque: 0.78Kg-cm (rated load)" mean?
10/25/2013 3:59:19 PM
NO RATINGS
Also to note you may need more power to get up a bump in the road and such.  As to your motors, and torque in general.  Torque is a simple force times a distance.  So if you had a wheel that had a diameter that was ø1" and it took 2lbs of force to get it going, then you would need a motor with 2in*lbs of torque (sometimes also written as lbs*in).  As to which motor is stronger, you will just need to do the unit conversions (actually cancel out the appropriate number of zeros) to get to N*m (Newton*meters).

User Rank
Blogger
Re: What does "Torque: 0.78Kg-cm (rated load)" mean?
10/25/2013 3:50:03 PM
NO RATINGS
@TonyTib: Next questions, how are you going to read the quadrature encoder?

Duane Benson is working on something that is so exciting it makes me want to squeal like a school girl. Duane and I will be writing about thsi in the not-so-distant future. Suffice it to say that it can be used to address this issue.

User Rank
CEO
Re: What does "Torque: 0.78Kg-cm (rated load)" mean?
10/25/2013 3:46:20 PM
NO RATINGS
That encoder is just a US Digital E4P with the proper sizing for the motor's shaft.  Another option if you need higher resolution is CUI's AMT encoders, which are <\$30 at Digikey.  With encoders, you have to match shaft size, mounting holes (or sticky tape), output format (quadrature / sin-cos / serial, single ended / differential, etc), and speed (which won't be an issue in your case).  Most (all?) E4Ps are single ended quadrature output.

Next questions, how are you going to read the quadrature encoder?  If you use interrupts, you'll be severely limited in speed.  Another approach is to convert quadrature to up/down and connect to a counter.  Also, there might be encoder input shields available.  (Side note: another reason why the BeagleBone is so nice, it's got three quadrature encoder inputs built in)

User Rank
Blogger
Re: Motors
10/25/2013 3:44:20 PM
NO RATINGS
@aeroengineer: What I really want is for someone to say "This motor is just what you need" ... failing that, your starting point is just what I need :-)

User Rank
Blogger
Motors
10/25/2013 3:22:20 PM
NO RATINGS
While bowties are cool, I prefer more the pinstripe suit and a long overcoat.  That aside to things of lesser importance, motors.  DC electric motors are not that bad if you can get a few numbers out of them.  The two main numbers that you will need are the Stall Torque and the No Load Speed.  From there I plot that data on a chart with RPM on the x axis and torque on the y axis.  The line between these two points represents the operating capacity of the motor.  I generally try and keep the motor operating under 30% of max torque for continuous duty operations with brief moments in the 50% torque range.  This will keep the motors happy.  You can go higher if you have active cooling on the motor.  With this in hand, you will then need to determine the amount of torque that is needed on each wheel.  Because you are going to loose some efficiency in each wheel (most likely each of these wheels will be around 50% efficient in transmitting torque to the ground).  This should give you some general sizing parameters.  You would have to do some hand cranks assuming an acceleration rate how much torque would be needed to be delivered to the wheels, but this should give you a starting point.

User Rank
Blogger
Re: What does "Torque: 0.78Kg-cm (rated load)" mean?
10/25/2013 3:16:39 PM
NO RATINGS
Take a look at this page. This was the motor I was originally going to get (but it doesn't have the shaft encoder).

This is rated at 78.4mN.m -- is that bigger / better / badder than 0.78Kg-cm?

<<   <   Page 6 / 7   >   >>

Flash Poll

#### Datasheets.com Parts Search

##### 185 million searchable parts (please enter a part number or hit search to begin)
Frankenstein's Fix, Teardowns, Sideshows, Design Contests, Reader Content & More
Betajet">

The Circle – The Future's Imperfect in the Present Tense 5 comments
The Circle, a satirical, dystopian novel published in 2013 by San Francisco-based writer Dave Eggers, is about a large, very powerful technology company that combines aspects of Google, ...

I'm not sure if I read more than most folks or not, but I do I know that I spend quite a lot of time reading. I hate to be idle, so I always have a book or two somewhere about my person -- ...

latest comment betajet

Vincent Valentine is a man on a mission. He wants to make the first house to ever have a telephone into a telephone museum. Without help, it may not happen.

As every developer knows, there are the paper specifications for a product design, and then there are the real requirements. The paper specs are dry, bland, and rigidly numeric, making ...

latest comment MWagner_MA
Special Video Section
The LT8640 is a 42V, 5A synchronous step-down regulator ...
5:52
The LTC2000 high-speed DAC has low noise and excellent ...
5:14
How do you protect the load and ensure output continues to ...
6:54
General-purpose DACs have applications in instrumentation, ...
7:34
Linear Technology demonstrates its latest measurement ...
10:29
Demos from Maxim Integrated at Electronica 2014 show ...
4:17
Bosch CEO Stefan Finkbeiner shows off latest combo and ...
5:59
STMicroelectronics demoed this simple gesture control ...
2:15
Keysight shows you what signals lurk in real-time at 510MHz ...
4:17
TE Connectivity's clear-plastic, full-size model car shows ...
3:42
Why culture makes Linear Tech a winner.
6:08
Recently formed Architects of Modern Power consortium ...
6:39
Specially modified Corvette C7 Stingray responds to ex Indy ...
8:52
Avago’s ACPL-K30T is the first solid-state driver qualified ...
2:42
NXP launches its line of multi-gate, multifunction, ...
4:56
Doug Bailey, VP of marketing at Power Integrations, gives a ...
9:28
See how to ease software bring-up with DesignWare IP ...
5:19
DesignWare IP Prototyping Kits enable fast software ...
4:01
This video explores the LT3086, a new member of our LDO+ ...
7:03
In today’s modern electronic systems, the need for power ...
5:48