Breaking News
Comments
Newest First | Oldest First | Threaded View
Bill_Jaffa
User Rank
Author
Re: Noisy TV
Bill_Jaffa   11/14/2013 11:45:01 PM
NO RATINGS
1 saves
Same sad situation with RCA, once the biggest company in electronics worldwide, as important as Intel+Microsoft, a leader in innovation and technology, in radio, TV, space comms, and much more, and now merely a marketing nameplate. To quote fro their website: "RCA is a global trademark administered by RCA Trademark Management SAS of Technicolor SA." And I think SONY may be next to become a shadow of its glory.

MeasurementBlues
User Rank
Author
Re: Noisy TV
MeasurementBlues   11/14/2013 11:39:30 PM
NO RATINGS
Well Westinghouse digital does list a PR contact.

Lois Whitman
HWH Public Relations
(917) 822-2591
loisw@hwhpr.com

MeasurementBlues
User Rank
Author
Noisy TV
MeasurementBlues   11/14/2013 11:38:26 PM
NO RATINGS
I have a TV that, after it's on for a few monutes make a sound that increases in freqency. After a time, it appears that the tone goes away, but I suspect taht the frequency is simply getting too high for me to hear. I suspect it something in the power supply such as a cheap capacitor.

BTW, it's a "name brand" TV. I saw name brand because to people somewhat older than I the name Westinghouse means quality. There is, to my surprise, a westinghouse.com that if you click on TV, takes you to westinghousedigital.com. According the the web site, Westinghouse Digital is HQ in Orange, CA. But, there is no street address or phone number. Makes me thing that it's a tiny office and everything else is in China. Even the press releses have no contact info.

zeeglen
User Rank
Author
Poor transient response
zeeglen   11/14/2013 11:23:14 AM
NO RATINGS
Had a DS1/DS3 mux board that would progress through boot and then reset itself.  After fruitlessly examining/replacing the flash, SRAM, processor, peripheral devices I finally looked at the +5 volt rail with a scope.

At the end of the boot the processor attempted to enable all 28 DS1 channels (1.544Mb/s) at the same time.  All these ttransmitters were loaded with 100 ohms each.  The resulting current surge transient could not be handled by the defective switch-mode 48V-to-5V DC-DC converter, so the 5V rail momentarilty dipped to 4.2V.  This of course tripped the power supply monitor which then reset the processor.

DrQuine
User Rank
Author
Re: Devices reporting low power Smart TV
DrQuine   11/14/2013 7:59:17 AM
NO RATINGS
Ron Neale

For rarely used devices, I find that poor contacts due to corrosion are a big issue.  As you suggested rolling the battery in place can be the cure and otherwise, I remove the batteries, rub the tarnished contact on my pants and replace them. In the case of the well used TV remote, I find that having to push the buttons harder means that the batteries are dying. I'm blaming myself (assuming I didn't push the button) rather than the batteries. A quick exchange of batteries and the device runs as good as new.

Ron Neale
User Rank
Author
Re: Devices reporting low power Smart TV
Ron Neale   11/14/2013 3:54:25 AM
NO RATINGS
Dr Quinne you have a built in detector, it is the oxidation rate of the contact surfaces of the spring that acts to locate the battery. Two first level solutions, bang the remote with your hand, if that fails open the battery compartment and rotate the batteries or remove and reinsert them. As far as pressing harder on the buttons that is again is in part to overcome oxidation or other fatigue effects on the switch membranes. Harder most likely also implies longer giving the detector more time to interpret the weak IR signal. Buying a Smart TV should solve the remote problem forever as you can then wave and scream at the TV to do your channel hopping etc. Except the Smart TV I have has two remotes!!

MrCruz
User Rank
Author
Re: Devices reporting low power
MrCruz   11/14/2013 12:10:09 AM
NO RATINGS
DrQuine,

It's not that we don't have the ability to detect low battery voltage. It's that when people are looking to scrinp on every last penny, the low battery detection circuit and/or sofware just isn't woth that extra hour or two of engineering time.

Knowing when a battery needs to be replaced is also a function of how heavily the device is being used.

DrQuine
User Rank
Author
Devices reporting low power
DrQuine   11/13/2013 8:41:23 PM
NO RATINGS
Electronic devices need better means for reporting when they have insufficient power. This is one example, my TV remote is another.  There comes a time when I push the TV remote buttons harder and harder with less and less effect. Finally I replace the batteries and all is well again. Surely the circuitry ought to be able to detect when there is insufficient power to function fully. If the disposable battery will need to be replaced, knowing whether it is 90% full or 10% full is somewhat academic. What I want to know is when it needs to be replaced.



Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Radio
NEXT UPCOMING BROADCAST

What are the engineering and design challenges in creating successful IoT devices? These devices are usually small, resource-constrained electronics designed to sense, collect, send, and/or interpret data. Some of the devices need to be smart enough to act upon data in real time, 24/7. Are the design challenges the same as with embedded systems, but with a little developer- and IT-skills added in? What do engineers need to know? Rick Merritt talks with two experts about the tools and best options for designing IoT devices in 2016. Specifically the guests will discuss sensors, security, and lessons from IoT deployments.
Most Recent Comments
dnadler017
 
realjjj
 
realjjj
 
jimfordbroadcom
 
jimfordbroadcom
 
resistion
 
jimfordbroadcom
 
jimfordbroadcom
 
realjjj
Like Us on Facebook
Special Video Section
LED lighting is an important feature in today’s and future ...
05:27
The LT8602 has two high voltage buck regulators with an ...
05:18
The quality and reliability of Mill-Max's two-piece ...
01:34
Why the multicopter? It has every thing in it. 58 of ...
Security is important in all parts of the IoT chain, ...
Infineon explains their philosophy and why the multicopter ...
The LTC4282 Hot SwapTM controller allows a board to be ...
This video highlights the Zynq® UltraScale+™ MPSoC, and sho...
Homeowners may soon be able to store the energy generated ...
The LTC®6363 is a low power, low noise, fully differential ...
See the Virtex® UltraScale+™ FPGA with 32.75G backplane ...
Vincent Ching, applications engineer at Avago Technologies, ...
The LT®6375 is a unity-gain difference amplifier which ...
The LTC®4015 is a complete synchronous buck controller/ ...
10:35
The LTC®2983 measures a wide variety of temperature sensors ...
The LTC®3886 is a dual PolyPhase DC/DC synchronous ...
The LTC®2348-18 is an 18-bit, low noise 8-channel ...
The LT®3042 is a high performance low dropout linear ...