Breaking News
Comments
Newest First | Oldest First | Threaded View
<<   <   Page 5 / 6   >   >>
Duane Benson
User Rank
Blogger
Re: How would you judge?
Duane Benson   11/27/2013 3:05:16 AM
NO RATINGS
AD "How would you judge the solder joins?"

It can be fairly subjective, but much of it can be measured. The IPC 610 standard describes things like fillet height, distance for fillet to clipped lean, part position on pad and such.

You could also judge to differnet levels of expertice so the experience folk wouldn't always runaway with the prises. The same standard has different levels: Class I (the minimum acceptable), Class II (appropriate for consumer goods), Class III (military & hi-reliability).

zeeglen
User Rank
Blogger
Re: Getting nasty
zeeglen   11/26/2013 11:29:13 PM
NO RATINGS
How about ultra-fine-ptch SMT with a 3/16" tip 'cuz the boss won't invest in a real soldering station - and without a microscope!  The ultimate soldering challenge!  (And yes, been there...)

antedeluvian
User Rank
Blogger
How would you judge?
antedeluvian   11/26/2013 7:39:19 PM
NO RATINGS
If such a competition were to take place, would you be interested in taking part?

How would you judge the solder joins? neatness, connectivity, symmetry, strength, "blobiness"? Seems a bit subjective, like gymnastics. "A 7 from the Russian judge"

I would take part, but I have no illusions about winning!

antedeluvian
User Rank
Blogger
Getting nasty
antedeluvian   11/26/2013 7:33:28 PM
NO RATINGS
If you want to separate the wheat from the chaff, try getting them to solder magnet wire.

steveDS
User Rank
Rookie
Soldering challange
steveDS   11/26/2013 7:30:22 PM
NO RATINGS
To make it really interesting you need to dead bug a chip on the board with blue wires!

Max The Magnificent
User Rank
Blogger
Re: Soldering
Max The Magnificent   11/26/2013 4:58:33 PM
NO RATINGS
@David: If I make it I'd give it a go.

I cannot imagine anyone I'd prefer as my "runner-up" LOL

Max The Magnificent
User Rank
Blogger
Re: What competition circuit
Max The Magnificent   11/26/2013 4:57:10 PM
NO RATINGS
@Rick: Practical Components: http://www.practicalcomponents.com/ offers some soldering training kits.

That's an interesting idea about the special quad flatpack thingies ... I shall ponder furiously on this...

Rcurl
User Rank
Rookie
Re: What competition circuit
Rcurl   11/26/2013 4:51:31 PM
NO RATINGS
@Max:"It would be great is we had a tri-colored LED (or maybe a number of individual LEDs) and we could arrange it so that bad solder joints affected the LEDs in some way"

Practical Components: http://www.practicalcomponents.com/ offers some soldering training kits.  Some of their kits come with a PC board and a special quad flatpack "dummy" chip that has some pins internally connected to each other. The idea is that you solder it to the board and then check the continuity between two pads on the PCB.  The circuit zigzags in and out of the chip package through all of the pins, so if you've got continuity, you've either got all the solder joints right (or at least conducting), or you've got a solder bridge.

zeeglen
User Rank
Blogger
Re: What competition circuit
zeeglen   11/26/2013 4:22:53 PM
NO RATINGS
All this talk about soldering reminds me of Day 2 at college.  The instructor passed around squares of plywood filled with nails along the edges.  We had to create a criss-crossed array of bare wires using the nails as anchors and solder them at every junction.

Many folks learned soldering through building of kits, Heathkit included a soldering how-to manual with every kit.  Funny how the worst solderers were TV repairmen, followed by ham radio operators.  Most first-timers followed the tips and did a decent job.

David Ashton
User Rank
Blogger
Soldering
David Ashton   11/26/2013 3:56:52 PM
NO RATINGS
Max - "....if we were to hold a soldering competition at EE Live! 2014,"

If I make it I'd give it a go.  Time us Aussies took something else off you guys besides the Americas Cup :-)

I recently constructed a 4x4x4 tri-colored 3D LED cube kit that required 400-plus soldered joints... needless to say it worked the first time I powered it up (well, actually, if truth be told, this was the first project I've ever built that worked the first time, but let's not rain on my parade as it were)."

Rats!  I was looking forward to you sending it to me for final commissioning..... :-)

<<   <   Page 5 / 6   >   >>


Flash Poll
EE Life
Frankenstein's Fix, Teardowns, Sideshows, Design Contests, Reader Content & More
Rishabh N. Mahajani, High School Senior and Future Engineer

Future Engineers: Don’t 'Trip Up' on Your College Road Trip
Rishabh N. Mahajani, High School Senior and Future Engineer
3 comments
A future engineer shares his impressions of a recent tour of top schools and offers advice on making the most of the time-honored tradition of the college road trip.

Max Maxfield

Juggling a Cornucopia of Projects
Max Maxfield
7 comments
I feel like I'm juggling a lot of hobby projects at the moment. The problem is that I can't juggle. Actually, that's not strictly true -- I can juggle ten fine china dinner plates, but ...

Larry Desjardin

Engineers Should Study Finance: 5 Reasons Why
Larry Desjardin
37 comments
I'm a big proponent of engineers learning financial basics. Why? Because engineers are making decisions all the time, in multiple ways. Having a good financial understanding guides these ...

Karen Field

July Cartoon Caption Contest: Let's Talk Some Trash
Karen Field
140 comments
Steve Jobs allegedly got his start by dumpster diving with the Computer Club at Homestead High in the early 1970s.

Top Comments of the Week
Like Us on Facebook
EE Times on Twitter
EE Times Twitter Feed

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)