Breaking News
Comments
Newest First | Oldest First | Threaded View
Thinking_J
User Rank
Author
so many TLAs... so little time
Thinking_J   12/6/2013 5:19:14 PM
NO RATINGS
Three Letter Acronyms (TLA).. we must love them, only explanation of their massive usage.

SiP .. SIP (single inline packages) as in DIP (dual inline packages)

POP (package on package) yet another variation on Green tape thick film hybrids (Green tape: a variation on un-fired ceramic with conductor pattern printed on it / in it).

Standard thick film packaging.. already fired ceramic with refiring to add screen printed conductors (gold,silver, palladium, etc..), resist (carbon, etc...) and dielectrics (glass insulating layers).. basically a physically small ceramic pcb with un-packaged die and printed resistors in the space of a standard IC package.

I designed and built a lot of Thick film hybrids back in the 70s/80s , till standard SMT took most of the "wind out it's sails". Still hard to beat for highest perfomance. (can mix optimum semiconductor technologies in one package)

Today .... only used in Space products.

Reason: dielectric absorbtion of the insulating materials used, thermal transfer of substrate and density with printed resistors and  KGD (Known Good Die - another TLA!)

In other words.. cost no object.. size / performance only concern.

 

David Ashton
User Rank
Author
Re: 2708/2716
David Ashton   11/26/2013 8:31:16 PM
NO RATINGS
@antedeluvian I remember those chips and how you had to check you had the right part.  There is a bit of a story on it here

http://www.tomshardware.com/forum/80532-13-what-diff-eprom-eprom#.

I think that is right - Texas were the ones with +5V only.  Before that TI also came out with the TMS 2508 - like the 2708 but only one  +5V supply:

http://www.ezoflash.com/datasheets/eprom/Texas/TMS2508.pdf

+25V for programming....remember that.....the good old days :-)

antedeluvian
User Rank
Author
2708/2716
antedeluvian   11/26/2013 7:47:28 PM
NO RATINGS
This talk of two chips in a single package reminds me of the early days of micros. There used to be a 1kx8 EPROM, the 2708 that required +5V and  -12V to operate. Intel brought out a 2Kx8 EPROM that only needed +5V to operate and called it the 2716. TI brought out a part with two 2708s in the same package and also called it the 2716. For a while the Intel part was in extremely short supply and I suspect more than a few people got the TI part which would have been problematic.



Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Like Us on Facebook
Special Video Section
Wireless Power enables applications where it is difficult ...
07:41
LEDs are being used in current luxury model automotive ...
With design sizes expected to increase by 5X through 2020, ...
01:48
Linear Technology’s LT8330 and LT8331, two Low Quiescent ...
The quality and reliability of Mill-Max's two-piece ...
LED lighting is an important feature in today’s and future ...
05:27
The LT8602 has two high voltage buck regulators with an ...
05:18
Silego Technology’s highly versatile Mixed-signal GreenPAK ...
The quality and reliability of Mill-Max's two-piece ...
01:34
Why the multicopter? It has every thing in it. 58 of ...
Security is important in all parts of the IoT chain, ...
Infineon explains their philosophy and why the multicopter ...
The LTC4282 Hot SwapTM controller allows a board to be ...
This video highlights the Zynq® UltraScale+™ MPSoC, and sho...
Homeowners may soon be able to store the energy generated ...
The LTC®6363 is a low power, low noise, fully differential ...
See the Virtex® UltraScale+™ FPGA with 32.75G backplane ...
Vincent Ching, applications engineer at Avago Technologies, ...
The LT®6375 is a unity-gain difference amplifier which ...
The LTC®4015 is a complete synchronous buck controller/ ...
10:35