Embedded Systems Conference
Breaking News
Comments
Newest First | Oldest First | Threaded View
krisi
User Rank
Author
Re: ESD
krisi   12/5/2013 11:15:11 AM
NO RATINGS
thank you Tony...I didn't realize standard in auto space are that high...in commercial ICs for wierless, broadband, medical imaging etc ESD is typically tested at 2kV HBM and only 500V CDM and MM...Kris

tonyadamson
User Rank
Author
Re: ESD
tonyadamson   12/5/2013 4:41:29 AM
NO RATINGS
6kV is the basic requirement for IEC-61004-2, with nearly all modern transceivers able to meet this comfortably.  Some solutions support up to 12kV, although I assume this is a process side effect rather than a design choice, as the added value is debateable and suppliers aim for the most cost-optimised solution (and ESD protection takes silicon area).

krisi
User Rank
Author
Re: ESD
krisi   12/4/2013 12:35:03 PM
NO RATINGS
thank you David, looks like very comprehensive test...and increadible performance if it covers HBM, CDM and MM at that level!

david_lopez_fsl
User Rank
Author
Re: ESD
david_lopez_fsl   12/4/2013 12:15:14 PM
NO RATINGS
+/- 6kV ESD performance mentionned on the MC33901/34901 Physical Layers release are the ISO10605:2008, EN 61000-4-2:2008 specifications with IC powered and unpowered, also called "gun test".
This is a system level ESD stress applied on pins leaving the module like CAN H and CAN L where energy to sustain at silicon level is higher than HBM, CDM and MM, and using different set up / current shape. 
Qualification flow of MC33901 and MC34901 also includes the HBM, MM and CDM with industry standard requirement to support handling aspects.

krisi
User Rank
Author
ESD
krisi   12/2/2013 1:46:07 PM
NO RATINGS
6 kV ESD is impressive...presumably this means HBM...what is teh CDM and MM?



Radio
LATEST ARCHIVED BROADCAST
As data rates begin to move beyond 25 Gbps channels, new problems arise. Getting to 50 Gbps channels might not be possible with the traditional NRZ (2-level) signaling. PAM4 lets data rates double with only a small increase in channel bandwidth by sending two bits per symbol. But, it brings new measurement and analysis problems. Signal integrity sage Ransom Stephens will explain how PAM4 differs from NRZ and what to expect in design, measurement, and signal analysis.

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Like Us on Facebook
Special Video Section
The LTC®6363 is a low power, low noise, fully differential ...
Vincent Ching, applications engineer at Avago Technologies, ...
The LT®6375 is a unity-gain difference amplifier which ...
The LTC®4015 is a complete synchronous buck controller/ ...
10:35
The LTC®2983 measures a wide variety of temperature sensors ...
The LTC®3886 is a dual PolyPhase DC/DC synchronous ...
The LTC®2348-18 is an 18-bit, low noise 8-channel ...
The LT®3042 is a high performance low dropout linear ...
Chwan-Jye Foo (C.J Foo), product marketing manager for ...
The LT®3752/LT3752-1 are current mode PWM controllers ...
LED lighting is an important feature in today’s and future ...
Active balancing of series connected battery stacks exists ...
After a four-year absence, Infineon returns to Mobile World ...
A laptop’s 65-watt adapter can be made 6 times smaller and ...
An industry network should have device and data security at ...
The LTC2975 is a four-channel PMBus Power System Manager ...
In this video, a new high speed CMOS output comparator ...
The LT8640 is a 42V, 5A synchronous step-down regulator ...
The LTC2000 high-speed DAC has low noise and excellent ...
How do you protect the load and ensure output continues to ...